son of a bitch

Roccomonte · 11-06-2009, 01:32 AM

I dropped one of the bolts from the shifter assembly into the trans, i heard it "dink dink dink dink" until it hit the bottom of the case.

Anyways how do you get a ax15 open? I havent looked at it at all but should i tackle it from the front or back? I already tried to put it upside down and shake and bake it.

i pity that bolt when i get it out of there

Airpup26 · 11-06-2009, 06:29 AM

I would use one of those fancy bendable magnets

jr4x · 11-06-2009, 07:35 AM

If the trany is out I wouldnt take it apart just yet. If you flip it upside down there is a few other cavities in the top the bolt could get trapped in untill you stand it up right again. I would lay it on its side and shake it around till you can see the bolt then snag it with a magnet.

Roccomonte · 11-06-2009, 05:11 PM

I shook it for about 30 minutes today, every possible direction. it wont come out the back or top.

what do i do?

csudman · 11-06-2009, 05:17 PM

Quote:

Originally Posted by Roccomonte

I shook it for about 30 minutes today, every possible direction. it wont come out the back or top.

what do i do?

Sounds like a problem for a doctorl

Champion · 11-07-2009, 08:28 AM

It is time to take it apart.

jr4x · 11-07-2009, 08:40 AM

If you cant find the bolt with that much molestation then its gonna have to come apart.

Dundy · 11-07-2009, 01:19 PM

Let the tranny eat it...NOM NOM NOM!

Keith · 11-07-2009, 02:20 PM

easy to take apart if you only want to get the case halfs offffffffff.

11-06-2009, 01:32 AM	#1
Roccomonte Registered User Join Date: Jun 2009 Member # 137737 Posts: 7	son of a bitch I dropped one of the bolts from the shifter assembly into the trans, i heard it "dink dink dink dink" until it hit the bottom of the case. Anyways how do you get a ax15 open? I havent looked at it at all but should i tackle it from the front or back? I already tried to put it upside down and shake and bake it. i pity that bolt when i get it out of there Last edited by Roccomonte; 11-06-2009 at 01:33 AM.

11-06-2009, 06:29 AM	#2
Airpup26 Registered User Join Date: Oct 2002 Member # 14143 Location: Vail, Colorado Posts: 412	I would use one of those fancy bendable magnets __________________ Looking for a new rig.

11-07-2009, 08:28 AM	#6
Champion Wheeler Join Date: Sep 2008 Member # 120189 Location: Schaumburg, IL Posts: 209	It is time to take it apart. __________________ Rig: YJ 4.0 TF999 231 4:1 HPd60 14B 40 Iroks Build thread coming soonhttp://pirate4x4.com/forum/showthrea...8#post10399678

11-07-2009, 02:20 PM	#9
Keith Rock Zombie Smurf! Join Date: Feb 2000 Member # 52 Location: Janesville, CA Posts: 6,354	easy to take apart if you only want to get the case halfs offffffffff. __________________ Save JV post #600

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-06-2009, 07:35 AM	#3
jr4x Registered User Join Date: Jul 2007 Member # 94747 Location: GJ colorado Posts: 1,020	If the trany is out I wouldnt take it apart just yet. If you flip it upside down there is a few other cavities in the top the bolt could get trapped in untill you stand it up right again. I would lay it on its side and shake it around till you can see the bolt then snag it with a magnet.

11-06-2009, 05:11 PM	#4
Roccomonte Registered User Join Date: Jun 2009 Member # 137737 Posts: 7	I shook it for about 30 minutes today, every possible direction. it wont come out the back or top. what do i do?

11-07-2009, 08:40 AM	#7
jr4x Registered User Join Date: Jul 2007 Member # 94747 Location: GJ colorado Posts: 1,020	If you cant find the bolt with that much molestation then its gonna have to come apart.

11-07-2009, 01:19 PM	#8
Dundy Registered User Join Date: Jan 2009 Member # 127378 Location: Stoughton, MA Posts: 4	Let the tranny eat it...NOM NOM NOM!