Wanted - FJ40 relay rod - Santa Clara / San Jose

terrx · 07-31-2005, 05:42 PM

Hi -

I'm looking for a relay rod from an FJ40. Doesn't have to be perfect. I need it to cut into some pieces for thick walled bushings to weld in a frame.

The other ones I've used have been about 7/8 inch OD and 1/2 inch ID. I only need about 6 inches of length. I forgot to "meaure twice cut once" - now need to cut a few more.

Hopefully within 10-20 miles of Santa Clara - San Jose area.

Thanks a lot!

-Scott

07-31-2005, 05:42 PM	#1
terrx Registered User Join Date: Apr 2004 Member # 29127 Location: Santa Clara, CA Posts: 46	Wanted - FJ40 relay rod - Santa Clara / San Jose Hi - I'm looking for a relay rod from an FJ40. Doesn't have to be perfect. I need it to cut into some pieces for thick walled bushings to weld in a frame. The other ones I've used have been about 7/8 inch OD and 1/2 inch ID. I only need about 6 inches of length. I forgot to "meaure twice cut once" - now need to cut a few more. Hopefully within 10-20 miles of Santa Clara - San Jose area. Thanks a lot! -Scott __________________ 77 FJ40 350TBI, NV4500, 35's, SUA. Older BTB rig with a few mods.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode