parting out built xj

wvredxj · 02-05-2007, 08:54 PM

this is located in summersville wv
please pm me here, or email me at Stangkillerss@yahoo.com
thanks for looking

here is everything that is for sale:
built 8.8, front hp d30 and np231

ford 8.8 out of 99 exploder
31 spline stock shafts
yukon 4:88 gear
full detroit locker
homeade truss
welded tubes
fairly new calipers and rotors (bought brand new when axle was installed)
M.O.R.E. spring pads, ubolts, and clamps.

front hp non disco d30
tnt truss with built in uca mounts
brand new alloy usa cromo 27 spline shafts
alloy usa inner axle seals
moog balljoints, new wheelbearings
precesion 4:88 r/p with lockrite (hardened pins, crossshaft, and carrier also installed)
good pads, calipers, and rotors
1000 bucks.
NP 231
new chain put in 6 months ago
Advance Adapters SYE

the rear 8.8 had some bites, but i will just post a price a make it easier.

1100 takes this thing home. it stands up to heavy abuse and is ready to bolt into your xj/yj with no shims, ready to bolt your driveshaft in.

the np231 is also still for sale, i will be removing that this week. no leaks, works fine, shifts easily into low lock and 4wd. No noises. I will also include rear tom woods double carden driveshaft. 400 takes this thing home.

offroad bumpers

here they are, lots of you guys have been wanting them, so i will put them up, first come first serve.

front jcr winch bumper. Added front hoop. Herculined, and added reinforcements. bent it the first time, sent it back, they added reinforcements, then i added more, couldnt bend it again, this thing is tuff. 2 nice big d ring mounts, and side protection. Some of the paint is peeling. You will have well over 550 to make yours look like mine from jcr. i will take 400.
link to front bumper:
http://www.jcroffroad.com/Merchant2/...egory_Code=XJB

pics of bumper on jeep:
http://img.photobucket.com/albums/v5...n/cracker8.jpg

rear hidden hitch for cherokee. Ran this thing for a long time. seen some abuse, lots of scratches, a little surface rust, and one chain slot is bent up slightly. will let this thing go with no hardwear (bolts broke in bolt stripe) for 40 bucks.

the bumpers include all hardware.

beadlocks, 35 inch baja claws, and black rock krawler wheels

crager 32 bolt beadlocks, screw in bolts, 15x8, 5x4.5. scratched, all bolts are included, nice wheels....400

35-50% tread, no wobbles, or shakes. i run these things with no weight. they are loud, but do ride good.

i will let these go for 400

4 15x10 ar black d ring rims...lots of scratches 60 bucks takes them home.....or for 430 you can have both of them, ready to bolt onto your jeep.

NO WARRENTIES ARE IMPLIED OR STATED

here are some pics:

front bumper:

added reinforcement:

jsix321 · 02-05-2007, 11:06 PM

how much to ship the beadlocks to Texas 76086

jsix321 · 02-05-2007, 11:07 PM

could you send pics to jsix321@yahoo.com

wvredxj · 02-05-2007, 11:11 PM

Quote:

Originally Posted by jsix321

could you send pics to jsix321@yahoo.com

i will just post them here, give me till tommorow to get you a shipping quote please

pics:

two need cleaned up

http://img.photobucket.com/albums/v5...s/DSC00099.jpg
http://img.photobucket.com/albums/v5...s/DSC00098.jpg

wvredxj · 02-06-2007, 08:21 AM

Quote:

Originally Posted by jsix321

how much to ship the beadlocks to Texas 76086

pm sent

XJ4THEKICKIN · 02-06-2007, 10:40 PM

$1000 shipped for 8.8? have access to a dock

02-05-2007, 08:54 PM	#1
wvredxj Wheeler Join Date: Feb 2006 Member # 67906 Posts: 100	parting out built xj this is located in summersville wv please pm me here, or email me at Stangkillerss@yahoo.com thanks for looking here is everything that is for sale: built 8.8, front hp d30 and np231 ford 8.8 out of 99 exploder 31 spline stock shafts yukon 4:88 gear full detroit locker homeade truss welded tubes fairly new calipers and rotors (bought brand new when axle was installed) M.O.R.E. spring pads, ubolts, and clamps. front hp non disco d30 tnt truss with built in uca mounts brand new alloy usa cromo 27 spline shafts alloy usa inner axle seals moog balljoints, new wheelbearings precesion 4:88 r/p with lockrite (hardened pins, crossshaft, and carrier also installed) good pads, calipers, and rotors 1000 bucks. NP 231 new chain put in 6 months ago Advance Adapters SYE the rear 8.8 had some bites, but i will just post a price a make it easier. 1100 takes this thing home. it stands up to heavy abuse and is ready to bolt into your xj/yj with no shims, ready to bolt your driveshaft in. the np231 is also still for sale, i will be removing that this week. no leaks, works fine, shifts easily into low lock and 4wd. No noises. I will also include rear tom woods double carden driveshaft. 400 takes this thing home. offroad bumpers here they are, lots of you guys have been wanting them, so i will put them up, first come first serve. front jcr winch bumper. Added front hoop. Herculined, and added reinforcements. bent it the first time, sent it back, they added reinforcements, then i added more, couldnt bend it again, this thing is tuff. 2 nice big d ring mounts, and side protection. Some of the paint is peeling. You will have well over 550 to make yours look like mine from jcr. i will take 400. link to front bumper: http://www.jcroffroad.com/Merchant2/...egory_Code=XJB pics of bumper on jeep: http://img.photobucket.com/albums/v5...n/cracker8.jpg rear hidden hitch for cherokee. Ran this thing for a long time. seen some abuse, lots of scratches, a little surface rust, and one chain slot is bent up slightly. will let this thing go with no hardwear (bolts broke in bolt stripe) for 40 bucks. the bumpers include all hardware. beadlocks, 35 inch baja claws, and black rock krawler wheels crager 32 bolt beadlocks, screw in bolts, 15x8, 5x4.5. scratched, all bolts are included, nice wheels....400 35-50% tread, no wobbles, or shakes. i run these things with no weight. they are loud, but do ride good. i will let these go for 400 4 15x10 ar black d ring rims...lots of scratches 60 bucks takes them home.....or for 430 you can have both of them, ready to bolt onto your jeep. NO WARRENTIES ARE IMPLIED OR STATED here are some pics: front bumper: added reinforcement: rear 8.8: http://img.photobucket.com/albums/v5...s/DSC00110.jpg http://img.photobucket.com/albums/v5...s/DSC00109.jpg http://img.photobucket.com/albums/v5...s/DSC00108.jpg http://img.photobucket.com/albums/v5...s/DSC00106.jpg front dana 30: http://img.photobucket.com/albums/v5...s/DSC00125.jpg http://img.photobucket.com/albums/v5...s/DSC00121.jpg http://img.photobucket.com/albums/v5...DSC00120-1.jpg http://img.photobucket.com/albums/v5...DSC00119-1.jpg np 231: http://img.photobucket.com/albums/v5...DSC00114-1.jpg http://img.photobucket.com/albums/v5...DSC00111-1.jpg

02-05-2007, 11:06 PM	#2
jsix321 Registered User Join Date: Dec 2005 Member # 64311 Location: Weatherford,Tx Posts: 85	shipping how much to ship the beadlocks to Texas 76086

02-05-2007, 11:07 PM	#3
jsix321 Registered User Join Date: Dec 2005 Member # 64311 Location: Weatherford,Tx Posts: 85	also could you send pics to jsix321@yahoo.com

02-06-2007, 10:40 PM	#6
XJ4THEKICKIN Registered User Join Date: Oct 2003 Member # 23829 Location: Alabama and Texass Posts: 731	$1000 shipped for 8.8? have access to a dock Last edited by XJ4THEKICKIN; 02-06-2007 at 10:40 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode