Steel is in

jdjanda · 06-17-2002, 12:01 PM

Steve, Mike, Todd, Nasvik

The steel is in, PM me to arrange pick up, I need to let the wife know when to expect someone during the day so she can put the 200lb Rot in the garage

mike · 06-17-2002, 12:06 PM

Sweet! I'll be picking up all the 1.75" but I'll let ya know when

Steve N · 06-17-2002, 01:04 PM

I'll let you know. I thought later I should have had it all delivered here.

nasvik · 06-17-2002, 04:09 PM

jdjanda - Thanks! You too mike!

Steve -

Paul

Steve N · 06-17-2002, 08:08 PM

What size dies does everyone else have again? I used to have a mental inventory but I'm feeling just kinda mental now. I've got a 2" and 1" I'll need 1.75 and 1.5 to do some stuff so if someone wants to trade around sizes for a couple days or so. Or bring yours and use it in my A/C equipped shop.

nasvik · 06-17-2002, 08:21 PM

I've got 100' of 1.75 x .120" and I calculate that I'll need about 85' of it - assuming I can bend things right the first time.

I also need about 10' of 1.75 x .250", 40' of 1.5 x .120" and 20' of 1 x ??" tube. So yeah.... I'll trade some if I can.

Edit - just read your post.

I have 1.5" and 2" dies and have borrowed a friend's 1.75" die. All are 180 and a tight CLR. I will need to borrow (or buy) a 1" die for this project.

Paul

jdjanda · 06-18-2002, 10:09 AM

06-17-2002, 12:01 PM	#1
jdjanda Registered User Join Date: Jul 2001 Member # 5982 Location: Austin, TX Posts: 4,285	Steel is in Steve, Mike, Todd, Nasvik The steel is in, PM me to arrange pick up, I need to let the wife know when to expect someone during the day so she can put the 200lb Rot in the garage __________________ Was that a comment meant to hurt? RU Dysfuncational http://thisdysfunctional.org/forum

06-17-2002, 12:06 PM	#2
mike Registered User Join Date: Feb 2000 Member # 144 Location: Northern Mexico... er.. AriDzona Posts: 6,851	Sweet! I'll be picking up all the 1.75" but I'll let ya know when __________________ That's because you're a pinko fascist. - Haole I know what antidisestablishmentarianist means

06-17-2002, 01:04 PM	#3
Steve N Registered User Join Date: Feb 2000 Member # 112 Location: Pleasant Hill CA Posts: 9,169	I'll let you know. I thought later I should have had it all delivered here. __________________ [COLOR=yellow]it's all about show & shine[/COLOR] [COLOR=Lime] Stiffy®? why screw around with anything less? [/COLOR] Charter member PBB mod divorce club for men.

06-17-2002, 04:09 PM	#4
nasvik Registered User Join Date: Jul 2000 Member # 1370 Location: San Francisco, CA Posts: 2,856	jdjanda - Thanks! You too mike! Steve - Paul __________________ www.jeepshots.com

06-17-2002, 08:08 PM	#5
Steve N Registered User Join Date: Feb 2000 Member # 112 Location: Pleasant Hill CA Posts: 9,169	What size dies does everyone else have again? I used to have a mental inventory but I'm feeling just kinda mental now. I've got a 2" and 1" I'll need 1.75 and 1.5 to do some stuff so if someone wants to trade around sizes for a couple days or so. Or bring yours and use it in my A/C equipped shop. __________________ [COLOR=yellow]it's all about show & shine[/COLOR] [COLOR=Lime] Stiffy®? why screw around with anything less? [/COLOR] Charter member PBB mod divorce club for men.

06-17-2002, 08:21 PM	#6
nasvik Registered User Join Date: Jul 2000 Member # 1370 Location: San Francisco, CA Posts: 2,856	I've got 100' of 1.75 x .120" and I calculate that I'll need about 85' of it - assuming I can bend things right the first time. I also need about 10' of 1.75 x .250", 40' of 1.5 x .120" and 20' of 1 x ??" tube. So yeah.... I'll trade some if I can. Edit - just read your post. I have 1.5" and 2" dies and have borrowed a friend's 1.75" die. All are 180 and a tight CLR. I will need to borrow (or buy) a 1" die for this project. Paul __________________ www.jeepshots.com Last edited by nasvik; 06-17-2002 at 08:23 PM.

06-18-2002, 10:09 AM	#7
jdjanda Registered User Join Date: Jul 2001 Member # 5982 Location: Austin, TX Posts: 4,285	__________________ Was that a comment meant to hurt? RU Dysfuncational http://thisdysfunctional.org/forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode