Ran fullsize tonight..or part of it.

Weasel · 10-17-2002, 10:32 PM

Well, I didn't know whether or not to post this since my junk's stock but I figured what the hell, it still a wheeling trip. Anyways I ran some of Fullsize tonight and it was a blast. SD guys are probably the only ones that will now what I'm talking about but anyways. I didn't run roll nut(think that's what it's called) but start right after it where it cuts the creek. Ran up to the flat slab coming out of the ground and couldn't quite get past it. Kept getting hung up on the front control arm mount or the rear part ot it. Then managed to get stuck and used a bottle jack to get off. So tried it a couple more times then went around. Did the first waterfall. I didn't get up the left line. Almost made it once but let off the gas too soon and couldn't get up past that. The right side took a couple shots but made it up. I skiped the middle sectiun with crusher cause I ddin't know if there was a bypass around it if I couldn't make it. I ran the last section though(where you turn to go up Kong) and had no problems. But damn that was fun. It was really my first time out doing good wheeling and pushing the stock pos XJ as far as it would go. Now it's time for a 3" lift and 31's. And yes I know this is weak but it's my shit and all I can afford so

Oh yeah....rocks and waterfalls rule.

synds9 · 10-17-2002, 10:37 PM

get a lift and a sawzall and you can put on 35's

Weasel · 10-17-2002, 10:47 PM

35's and toothpicks don't go well. snap crackle pop. You would think I was eatin cereal.

10-17-2002, 10:32 PM	#1
Weasel Zeus of the Sluice Join Date: Jul 2001 Member # 5639 Location: Billings, MT/Rapid City, SD Posts: 4,392	Ran fullsize tonight..or part of it. Well, I didn't know whether or not to post this since my junk's stock but I figured what the hell, it still a wheeling trip. Anyways I ran some of Fullsize tonight and it was a blast. SD guys are probably the only ones that will now what I'm talking about but anyways. I didn't run roll nut(think that's what it's called) but start right after it where it cuts the creek. Ran up to the flat slab coming out of the ground and couldn't quite get past it. Kept getting hung up on the front control arm mount or the rear part ot it. Then managed to get stuck and used a bottle jack to get off. So tried it a couple more times then went around. Did the first waterfall. I didn't get up the left line. Almost made it once but let off the gas too soon and couldn't get up past that. The right side took a couple shots but made it up. I skiped the middle sectiun with crusher cause I ddin't know if there was a bypass around it if I couldn't make it. I ran the last section though(where you turn to go up Kong) and had no problems. But damn that was fun. It was really my first time out doing good wheeling and pushing the stock pos XJ as far as it would go. Now it's time for a 3" lift and 31's. And yes I know this is weak but it's my shit and all I can afford so Oh yeah....rocks and waterfalls rule. __________________ Sometimes it seems things go by too quickly. We are so busy watching out for what's just ahead of us that we don't take the time to enjoy where we are. Sometimes one should just look at things and think about things without doing things.

10-17-2002, 10:37 PM	#2
synds9 Registered User Join Date: Mar 2002 Member # 10360 Location: San Diego, CA Posts: 634	get a lift and a sawzall and you can put on 35's __________________ i love my truck, but i'm obsessed with clubbing... you know, like baby seals and stuff.

10-17-2002, 10:47 PM	#3
Weasel Zeus of the Sluice Join Date: Jul 2001 Member # 5639 Location: Billings, MT/Rapid City, SD Posts: 4,392	35's and toothpicks don't go well. snap crackle pop. You would think I was eatin cereal. __________________ Sometimes it seems things go by too quickly. We are so busy watching out for what's just ahead of us that we don't take the time to enjoy where we are. Sometimes one should just look at things and think about things without doing things.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode