Savvy Off Road Aluminum TJ Full Corners *** ON SALE NOW! ***

Provelogear · 09-18-2009, 05:15 PM

Savvy Off Road has in stock and ready to ship three different full corner 6061 T-6 aluminum armor kits. All come with 3/8" tub backing plates, tailgate spacers, real nutserts, and stainless steel hardware:

PRICES ARE GOING UP!

Also have YJ blanks so you can cut whatever wheelbase you are at. No filler hole or wheel openings. Just the countersunk mounting holes

ON SALE NOW! Lowest cost with no extra cost for all of the goodies!

TJ SWB Factory Flare Holes and light plug $299

TJ SWB No Factory Flare Holes with light plug $299

TJ SWB Only mounting holes $299

jeepinTY · 09-18-2009, 06:10 PM

Are these meant to be used with full length rock sliders? Ones that reach the front of the back wheel well?

Provelogear · 09-18-2009, 07:15 PM

Quote:

Originally Posted by jeepinTY

Are these meant to be used with full length rock sliders? Ones that reach the front of the back wheel well?

Yes, there are designed to fit on top of wheel well to wheel well rockers.

Here is a pix with our rockers.

Provelogear · 09-22-2009, 10:33 AM

These are in stock and ready to ship! Prices are going to go up after this initial run.

Thanks for looking!

Gerald

thebigredtruck · 09-23-2009, 11:06 AM

how much do they weigh compaired to the steel corners?

Provelogear · 09-23-2009, 11:27 AM

Quote:

Originally Posted by thebigredtruck

how much do they weigh compaired to the steel corners?

The standard aluminum corner weighs 12 lbs no hardware or backing plate. You'd add another pound or two for that.

I have a set of half PSC corners and they weigh 28 each side. A full corner has to be around 35-50 pounds and then if you add the flare a bunch more.

Thanks for looking,

Gerald

Provelogear · 10-06-2009, 08:24 AM

See them at the Pomona Off Road Expo. Show Specials Only at the Show!

Thanks!

Provelogear · 10-10-2009, 08:54 PM

We also have or new rub rails on display!

Provelogear · 10-14-2009, 01:51 PM

Prices will be going up soon!

dgfordman · 10-14-2009, 02:22 PM

you making any corners for comp cut yj's? if so id buy a set

Provelogear · 10-19-2009, 01:59 PM

We have blanks for the YJ. Only the mounting holes.

Thanks,

Gerald

slvrjp00 · 10-19-2009, 06:02 PM

Are you going to be making them for a TJ with maybe a 3" stretch or a high line version. Very interest I ditched my PSC ones years ago they were just to heavy.

Provelogear · 10-19-2009, 07:35 PM

We are making the blanks for everyone that is strecthing their Jeeps. The blanks we offer only have the mounting holes done. Then it is up to you to cut what you want. They are pretty easy to cut.

Thanks

Gerald

Provelogear · 10-23-2009, 07:35 AM

Price are going up! Take advantange of this sale now!

dgfordman · 10-24-2009, 07:39 PM

how much for yj blanks shipped to 95692. thanks

Provelogear · 10-25-2009, 08:14 PM

Quote:

Originally Posted by dgfordman

how much for yj blanks shipped to 95692. thanks

$320 shipped.

Thanks,

Gerald

Provelogear · 10-28-2009, 08:11 AM

PMs returned. Thanks!

Provelogear · 10-30-2009, 06:40 PM

Look for our LJ corners next month!

dan58 · 11-02-2009, 11:33 AM

Price for YJ comp cut to 20705?

Provelogear · 11-02-2009, 01:37 PM

Dan,

We only offer YJ blanks. You cut them however you want them. Only the mounting holes are drilled and counter sunk. $320 shipped.

Thanks,

Gerald

Provelogear · 11-05-2009, 11:23 AM

Ships same day!

Provelogear · 11-08-2009, 06:45 AM

Thanks for your orders!

Provelogear · 11-10-2009, 03:28 PM

Get them at this price for only a little while longer!

Provelogear · 11-13-2009, 07:07 AM

We now have YJ blanks!

WILLTAKE · 11-15-2009, 12:40 AM

Any idea of pricing on the LJ corners? Blank if it makes a difference.

Thanks

09-18-2009, 05:15 PM	#1
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	Savvy Off Road Aluminum TJ Full Corners * ON SALE NOW! * Savvy Off Road has in stock and ready to ship three different full corner 6061 T-6 aluminum armor kits. All come with 3/8" tub backing plates, tailgate spacers, real nutserts, and stainless steel hardware: PRICES ARE GOING UP! Also have YJ blanks so you can cut whatever wheelbase you are at. No filler hole or wheel openings. Just the countersunk mounting holes ON SALE NOW! Lowest cost with no extra cost for all of the goodies! TJ SWB Factory Flare Holes and light plug $299 TJ SWB No Factory Flare Holes with light plug $299 TJ SWB Only mounting holes $299 __________________ http://www.savvyoffroad.com

09-22-2009, 10:33 AM	#4
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	These are in stock and ready to ship! Prices are going to go up after this initial run. Thanks for looking! Gerald __________________ http://www.savvyoffroad.com

09-23-2009, 11:06 AM	#5
thebigredtruck Wheeler Join Date: Nov 2005 Member # 56634 Location: roseville Posts: 228	how much do they weigh compaired to the steel corners? __________________ Pirate is a monkey on my back whispering "build your jeep bigger and buy 60s!!!!" Last edited by thebigredtruck; 09-23-2009 at 11:07 AM.

10-06-2009, 08:24 AM	#7
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	See them at the Pomona Off Road Expo. Show Specials Only at the Show! Thanks! __________________ http://www.savvyoffroad.com

10-10-2009, 08:54 PM	#8
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	We also have or new rub rails on display! __________________ http://www.savvyoffroad.com

09-18-2009, 06:10 PM	#2
jeepinTY Registered User Join Date: May 2006 Member # 73191 Location: Groves, Tx (near Beaumont) Posts: 421	Are these meant to be used with full length rock sliders? Ones that reach the front of the back wheel well?

10-14-2009, 01:51 PM	#9
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	Prices will be going up soon! __________________ http://www.savvyoffroad.com

10-14-2009, 02:22 PM	#10
dgfordman Night Crawler Join Date: Mar 2006 Member # 70242 Location: wheatland, ca Posts: 496	you making any corners for comp cut yj's? if so id buy a set __________________ 96 ranger with hp44,31spl9, coilovers....89 jeep wrangler 4.o HO hp60,70u,5.13s, 42 tsl's, soon to be231 doubled to a dana 300 fliped . fucncrawlin

10-19-2009, 01:59 PM	#11
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	We have blanks for the YJ. Only the mounting holes. Thanks, Gerald __________________ http://www.savvyoffroad.com

10-19-2009, 06:02 PM	#12
slvrjp00 Newbie Join Date: Sep 2008 Member # 120641 Location: MD Posts: 66	Are you going to be making them for a TJ with maybe a 3" stretch or a high line version. Very interest I ditched my PSC ones years ago they were just to heavy. __________________ RCROCS Class 2 Team 628 Minor Threat Offroad Thanks to my sponsor Appalachian Offroad for all there help.

10-19-2009, 07:35 PM	#13
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	We are making the blanks for everyone that is strecthing their Jeeps. The blanks we offer only have the mounting holes done. Then it is up to you to cut what you want. They are pretty easy to cut. Thanks Gerald __________________ http://www.savvyoffroad.com

10-23-2009, 07:35 AM	#14
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	Price are going up! Take advantange of this sale now! __________________ http://www.savvyoffroad.com

10-24-2009, 07:39 PM	#15
dgfordman Night Crawler Join Date: Mar 2006 Member # 70242 Location: wheatland, ca Posts: 496	how much for yj blanks shipped to 95692. thanks __________________ 96 ranger with hp44,31spl9, coilovers....89 jeep wrangler 4.o HO hp60,70u,5.13s, 42 tsl's, soon to be231 doubled to a dana 300 fliped . fucncrawlin

10-28-2009, 08:11 AM	#17
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	PMs returned. Thanks! __________________ http://www.savvyoffroad.com

10-30-2009, 06:40 PM	#18
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	Look for our LJ corners next month! __________________ http://www.savvyoffroad.com

11-02-2009, 11:33 AM	#19
dan58 marylandcreepers.com Join Date: May 2003 Member # 19330 Location: MD Posts: 870	Price for YJ comp cut to 20705? __________________ Save Tellico -> Post 52

11-02-2009, 01:37 PM	#20
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	Dan, We only offer YJ blanks. You cut them however you want them. Only the mounting holes are drilled and counter sunk. $320 shipped. Thanks, Gerald __________________ http://www.savvyoffroad.com

11-05-2009, 11:23 AM	#21
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	Ships same day! __________________ http://www.savvyoffroad.com

11-08-2009, 06:45 AM	#22
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	Thanks for your orders! __________________ http://www.savvyoffroad.com

11-10-2009, 03:28 PM	#23
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	Get them at this price for only a little while longer! __________________ http://www.savvyoffroad.com

11-13-2009, 07:07 AM	#24
Provelogear Wheeler Join Date: Mar 2008 Member # 110540 Location: Tustin, CA Posts: 235	We now have YJ blanks! __________________ http://www.savvyoffroad.com

11-15-2009, 12:40 AM	#25
WILLTAKE Newbie Join Date: Sep 2009 Member # 142983 Posts: 13	Any idea of pricing on the LJ corners? Blank if it makes a difference. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode