Rockcrusher Axle Assemblies, Knuckles, Hi-Steer Arms, and other Axle Parts Sale!!!

RPMRacers · 10-20-2009, 11:43 AM

KINGPIN KNUCKLES AND INNER C'S

KINGPIN ARMS - WITH CAPS AVAILABLE SEPERATE

KINGPIN ARMS WITH CAPS MACHINED TOGETHER -

BALL JOINT DANA 60 ARMS-

ALL ARMS WILL COME WITH HARDWARE OR YOU CAN GET THEM WITHOUT.

REAR SUBASSEMBLIES -
Full-Float Rear Sub-Assembly - $1450 plus freight
Includes:
*High Pinion Ductile Cast Dana 60 Housing with Ductile Cast Dana 60 Cover - Lifetime Warranty

*Tubes that are 3-1/8" x 1/2" Wall Machined and Press fit into the Housing in any length needed then welded

*Billet 4340 Chromoly Full Float Spindles

*All Rear Assemblies come completely welded ready for hubs, shafts, gears, etc.

Semi-Float Rear Sub-Assembly - $1350 plus freight
Includes:
*High Pinion Ductile Cast Dana 60 Housing with Ductile Cast Dana 60 Cover - Lifetime Warranty

*Tubes that are 3-1/8" x 1/2" Wall Machined and Press fit into the Housing in any length needed then welded

*Billet 4340 Chromoly Bearing Housing Ends

*All Rear Assemblies come completely welded ready for hubs, shafts, gears, etc.

We also can put together a full quote with gears, locker, brakes, hubs, etc. on the rear axle assembly if needed, just email us (info@rpmoffroad.com) with what you are looking for.

DANA 44 HUBS WITH STUDS - 5 ON 5.5

DANA 60 HUBS WITH STUDS & ROTORS - 8 on 6.5
....ALSO Available with RC Billet Spindles or a full package with 4340 35 Spline stubs, RC Drive Flanges, Brake Caliper Brackets

Rear Billet Full Floater Spindles -

lt1fj62 · 10-20-2009, 06:46 PM

Do you have the conversion kit for a Chevy DRW Kingpin to make it 6 on 5.5

jsawduste · 10-20-2009, 07:22 PM

Can the D60 C`s be bored out to 3 1/2 inches ?

Ball joint D60 knuckles or KP only ?

RPMRacers · 10-21-2009, 11:40 AM

Quote:

Originally Posted by lt1fj62

Do you have the conversion kit for a Chevy DRW Kingpin to make it 6 on 5.5

PM Sent.

RPMRacers · 10-21-2009, 11:43 AM

Quote:

Originally Posted by jsawduste

Can the D60 C`s be bored out to 3 1/2 inches ?

Ball joint D60 knuckles or KP only ?

PM Sent.

4.0TJ · 10-21-2009, 10:06 PM

can a get a quote on a pair of dana 60 inner c's and knuckles with the high steer arms shipped to 58265 thanks

thebigredtruck · 10-22-2009, 12:16 AM

how about a price for a set of king pin knuckles and high steer arms shipped to 95747

RPMRacers · 10-22-2009, 09:35 AM

Quote:

Originally Posted by 4.0TJ

can a get a quote on a pair of dana 60 inner c's and knuckles with the high steer arms shipped to 58265 thanks

Pm Sent.

RPMRacers · 10-22-2009, 09:38 AM

Quote:

Originally Posted by thebigredtruck

how about a price for a set of king pin knuckles and high steer arms shipped to 95747

Pm Sent.

smogboy · 10-26-2009, 10:46 AM

how much for the set up for my 60?king pin 78 ford f350 .knukles,arms,cs

dobsogj · 10-27-2009, 06:57 PM

Ford kp knuckles to 74604 please

RPMRacers · 10-29-2009, 08:34 AM

Quote:

Originally Posted by smogboy

how much for the set up for my 60?king pin 78 ford f350 .knukles,arms,cs

Pm Sent. Thanks

HalfFastFord · 10-30-2009, 04:35 PM

pair of kingpin arms (both styles) and hardware to 74857

duck454ss · 10-31-2009, 12:05 AM

what would the hub kit for a king pin dan 60 run a person?

RPMRacers · 11-02-2009, 07:50 AM

Quote:

Originally Posted by dobsogj

Ford kp knuckles to 74604 please

PM Sent.

RPMRacers · 11-02-2009, 08:21 AM

Quote:

Originally Posted by HalfFastFord

pair of kingpin arms (both styles) and hardware to 74857

PM Sent.

RPMRacers · 11-02-2009, 08:23 AM

Quote:

Originally Posted by duck454ss

what would the hub kit for a king pin dan 60 run a person?

PM Sent.

hexal · 11-02-2009, 11:30 AM

Need a quote for Knuckles out for a 60. Knuckles, stubs, caliper brackets, spindles, in chevy pattern
to 80209 please

I already have seperate quote out to you for a blue "heavy duty" flange from you

Also, do the caliper mounts accept the standard 3/4 chevy caliper?

thanks

RPMRacers · 11-03-2009, 01:54 PM

Quote:

Originally Posted by hexal

Need a quote for Knuckles out for a 60. Knuckles, stubs, caliper brackets, spindles, in chevy pattern
to 80209 please

I already have seperate quote out to you for a blue "heavy duty" flange from you

Also, do the caliper mounts accept the standard 3/4 chevy caliper?

thanks

Pm Sent! Thanks

BamaScout · 11-03-2009, 05:40 PM

Please quote

Ford Kingpin D60 Knuckles
Histeer arms
studs

shipped to 35004

*Also, is Rockcrusher the same as Solid Axle?? I thought it was, but now Solid is Spyntech or something like that?

RPMRacers · 11-04-2009, 10:14 AM

Quote:

Originally Posted by BamaScout

Please quote

Ford Kingpin D60 Knuckles
Histeer arms
studs

shipped to 35004

*Also, is Rockcrusher the same as Solid Axle?? I thought it was, but now Solid is Spyntech or something like that?

PM Sent and also sent a pm on Solid vs RC

Silkmac · 11-06-2009, 09:14 PM

Can I get a price on the dana 60 kingpin knuckles? Thanks

Doug-Highboy · 11-06-2009, 11:30 PM

Whats the inside diameter on tube end of the 60 full float spindles??? (want to put em on my existing 60 to run 35 spline) and the cost for a pair to western canada? Do you sell the flanges to run double spline rear 60 shafts to?? Need a set of those.

RPMRacers · 11-09-2009, 03:19 PM

Quote:

Originally Posted by Silkmac

Can I get a price on the dana 60 kingpin knuckles? Thanks

PM Sent.

RPMRacers · 11-09-2009, 03:56 PM

Quote:

Originally Posted by Doug-Highboy

Whats the inside diameter on tube end of the 60 full float spindles??? (want to put em on my existing 60 to run 35 spline) and the cost for a pair to western canada? Do you sell the flanges to run double spline rear 60 shafts to?? Need a set of those.

PM Sent.

10-20-2009, 11:43 AM	#1
RPMRacers RPM Offroad LLC Join Date: Mar 2008 Member # 110379 Location: Bristol TN Posts: 1,824	Rockcrusher Axle Assemblies, Knuckles, Hi-Steer Arms, and other Axle Parts Sale!!! KINGPIN KNUCKLES AND INNER C'S KINGPIN ARMS - WITH CAPS AVAILABLE SEPERATE KINGPIN ARMS WITH CAPS MACHINED TOGETHER - BALL JOINT DANA 60 ARMS- ALL ARMS WILL COME WITH HARDWARE OR YOU CAN GET THEM WITHOUT. REAR SUBASSEMBLIES - Full-Float Rear Sub-Assembly - $1450 plus freight Includes: High Pinion Ductile Cast Dana 60 Housing with Ductile Cast Dana 60 Cover - Lifetime Warranty Tubes that are 3-1/8" x 1/2" Wall Machined and Press fit into the Housing in any length needed then welded Billet 4340 Chromoly Full Float Spindles All Rear Assemblies come completely welded ready for hubs, shafts, gears, etc. Semi-Float Rear Sub-Assembly - $1350 plus freight Includes: High Pinion Ductile Cast Dana 60 Housing with Ductile Cast Dana 60 Cover - Lifetime Warranty Tubes that are 3-1/8" x 1/2" Wall Machined and Press fit into the Housing in any length needed then welded Billet 4340 Chromoly Bearing Housing Ends All Rear Assemblies come completely welded ready for hubs, shafts, gears, etc. We also can put together a full quote with gears, locker, brakes, hubs, etc. on the rear axle assembly if needed, just email us (info@rpmoffroad.com) with what you are looking for. DANA 44 HUBS WITH STUDS - 5 ON 5.5 DANA 60 HUBS WITH STUDS & ROTORS - 8 on 6.5 ....ALSO Available with RC Billet Spindles or a full package with 4340 35 Spline stubs, RC Drive Flanges, Brake Caliper Brackets Rear Billet Full Floater Spindles - __________________ www.rpmoffroad.com (site coming soon) Email: info@rpmoffroad.com Shop# 423-573-3300 PAYPAL: info@rpmoffroad.com Proud Distributors of Readywelder Products, Yukon Gears and Shafts, RockCrusher Diffs, Nitro Gears and Shafts, BDS-Suspension, Zone Offroad Suspension, Corbeau Seats, S&B Filters, XD Wheels, and many more just PM, Email, or Call us with what you are looking for!

10-20-2009, 07:22 PM	#3
jsawduste Rock God Join Date: Aug 2006 Member # 77571 Posts: 1,101	Can the D60 C`s be bored out to 3 1/2 inches ? Ball joint D60 knuckles or KP only ? __________________ Swamp Stomper 4x4 Club Member

10-22-2009, 12:16 AM	#7
thebigredtruck Wheeler Join Date: Nov 2005 Member # 56634 Location: roseville Posts: 228	how about a price for a set of king pin knuckles and high steer arms shipped to 95747 __________________ Pirate is a monkey on my back whispering "build your jeep bigger and buy 60s!!!!"

10-26-2009, 10:46 AM	#10
smogboy Wheeler Join Date: Apr 2006 Member # 70887 Location: paradise,ca Posts: 137	need a quote how much for the set up for my 60?king pin 78 ford f350 .knukles,arms,cs Last edited by smogboy; 10-26-2009 at 10:47 AM.

10-27-2009, 06:57 PM	#11
dobsogj Granite Guru Join Date: Jan 2003 Member # 16561 Location: SOUTH OF HEAVEN Posts: 951	Ford kp knuckles to 74604 please __________________ Gone but not forgotten: 81 Toyota - 60/14 - coils - 42"TSLs - 350 LT1 - 400+203+Atlas 3.0 http://www.pirate4x4.com/forum/showt...948&highlight= replaced by: 4 seat FJ40 buggy. Alum 5.3 - Th400 - Atlas 4 speed - 60/14 etc...http://www.pirate4x4.com/forum/showthread.php?t=660786 Last edited by dobsogj; 10-27-2009 at 07:07 PM.

10-20-2009, 06:46 PM	#2
lt1fj62 Registered User Join Date: Oct 2007 Member # 100556 Posts: 29	Do you have the conversion kit for a Chevy DRW Kingpin to make it 6 on 5.5

10-21-2009, 10:06 PM	#6
4.0TJ Registered User Join Date: Aug 2009 Member # 140411 Posts: 21	can a get a quote on a pair of dana 60 inner c's and knuckles with the high steer arms shipped to 58265 thanks

10-30-2009, 04:35 PM	#13
HalfFastFord tits or gtfo Join Date: Mar 2003 Member # 17904 Location: OKC Posts: 1,831	pair of kingpin arms (both styles) and hardware to 74857

10-31-2009, 12:05 AM	#14
duck454ss Registered User Join Date: Dec 2007 Member # 104190 Posts: 9	hub kit what would the hub kit for a king pin dan 60 run a person?

11-02-2009, 11:30 AM	#18
hexal Custom Garage Weight Join Date: Jul 2003 Member # 21253 Location: Denver Posts: 272	Need a quote for Knuckles out for a 60. Knuckles, stubs, caliper brackets, spindles, in chevy pattern to 80209 please I already have seperate quote out to you for a blue "heavy duty" flange from you Also, do the caliper mounts accept the standard 3/4 chevy caliper? thanks

11-03-2009, 05:40 PM	#20
BamaScout Wheeler Join Date: Dec 2003 Member # 25360 Location: Moody, AL Posts: 316	Please quote Ford Kingpin D60 Knuckles Histeer arms studs shipped to 35004 Also, is Rockcrusher the same as Solid Axle?? I thought it was, but now Solid is Spyntech or something like that? __________________ 1989 Wrangler -- Working on it - 6.0 LQ9 - TH400 - AtlasII 3.0 - Ford D60's w/ 5.38's (chromo 35spline throughout with rear ARB) - 39" Red Labels Last edited by BamaScout; 11-03-2009 at 06:12 PM.*

11-06-2009, 09:14 PM	#22
Silkmac Registered User Join Date: Aug 2009 Member # 140916 Posts: 22	Knuckles Can I get a price on the dana 60 kingpin knuckles? Thanks Last edited by Silkmac; 11-06-2009 at 09:15 PM.

11-06-2009, 11:30 PM	#23
Doug-Highboy Newbie Join Date: May 2007 Member # 91115 Posts: 27	Whats the inside diameter on tube end of the 60 full float spindles??? (want to put em on my existing 60 to run 35 spline) and the cost for a pair to western canada? Do you sell the flanges to run double spline rear 60 shafts to?? Need a set of those.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode