FFFRRREEEEBBBBIIIIEEEE. Leaf springs 2.5" wide San Jo. CA

sfazr2 · 04-25-2003, 10:21 AM

Leaf springs...get your leaf springs. All different lengths. Not too saggy either. Will have a 52" main available soon. The rest are support leaves. Even have overload leafs.

Greg
408-685-6726

Edit: I've been getting guys asking me if I have any springs for a particular vehicle. These came from s-10's and cherokees. But if your springs are 2.5" wide, I don't see why they wouldnt work.

Flatty · 04-25-2003, 03:46 PM

You got any 3/4 ton springs? I want to 1/4 my rear, and need some 3/4 ton springs.

Dimtiri

sfazr2 · 04-25-2003, 04:58 PM

Couldn't you just build a thicker leaf pack. I just have a pretty large assortment of leaves. I do have some with eyeletts that you could use as a main. I'm not real familiar with how the 1/4 is setup. I've seen it but not in detail. These leaves came from the back of s-10's and cherokee's.

As far as I know the 3/4 ton's just had more 2.5" springs than the 1/2 ton.

INFAMOUSBUTCHER · 04-27-2003, 11:04 PM

you still have these leafs? if so how many cherokee pairs do you have? im very interested

sfazr2 · 04-28-2003, 12:22 AM

I used the cherokee mains to do my buggy springs thus just the rest of the pack... I'm sure otherwise you could build a whole set from what i have. I do have an s-10 main available (52") with you choice of lengths for the rest of the pack.

D-RAT · 04-28-2003, 04:34 PM

If you got a couple with some decent arch and are about 30" long with the hole in the middle of the span, I'll take a pair of leaves.

Work up shipping to 85206 zip code and PM me if you can help me out.

Thanks!

sfazr2 · 04-28-2003, 06:13 PM

just how many leaves in a pair do you need? how far off center can the holes be. And shipping? sure it's worth it? Checked with a local junk yard?

D-RAT · 04-28-2003, 08:41 PM

Just looking for two single leaves. My laziness and lack of free time has kept me out of the yards. Would pay $25 shipped for 2 good leaves that are the size I'm looking for.

Janoso · 04-30-2003, 12:41 AM

how many leaves or pairs of leaves do you have? I could possibly take them off your hands.
Janos

Brutpwr · 04-30-2003, 02:01 AM

Need some leafs to play around with on my Toyota and my bike trailer which is on Wrangler 4" springs! Let me know if you have anything left and I'll swing on by!

Jason

sfazr2 · 04-30-2003, 08:45 AM

I'm not sure how many leafs i have. I'll be happy to pull them out and let you guys have at them. Give me a call at 408-685-6726 to get my address.

Skeezr · 05-01-2003, 05:24 PM

what size of overload springs u have im interested by the way do u have any u bolt plates for a dana 30

sfazr2 · 05-01-2003, 07:43 PM

I took all of my overload springs out. They're 2.5" wide and about 24" ish long. They're about 3/8" thick at the center.

I do have dana 30 plates but i'm trying to save them for the buyer of my axle so it's a complete bolt in.

Skeezr · 05-02-2003, 02:33 PM

Ill take 2 of your overload springs when do you want to do this

sfazr2 · 05-02-2003, 02:49 PM

Today if possible. I'll be out of town for the weekend. I don't fly out untill 8pm so sometime before 6pm...i'm probably home all day
408-685-6726

Flatty · 05-06-2003, 01:32 PM

Do you have any Ford F250/350 springs?

Dimitri

sfazr2 · 05-06-2003, 02:09 PM

no they're like 3" wide right? no all of mine are 2.5"

Flatty · 05-07-2003, 11:34 AM

Not all of them. Some of them are 2.5" wide

Dimitri

sfazr2 · 05-07-2003, 12:53 PM

I edited in my first post that these are from s-10's and cherokees, but as far as i know a leaf spring is a leaf spring, just depends on the width and the how stiff you want it (lenght) To a point arch makes a difference but probably 90% of the leaf sprung vehicles out there have a pretty standard arch.

LandCroozer · 05-07-2003, 07:19 PM

Free springs? If you're in San Jose like you're tag says, PM me and I'll come by with a six pack for ya and pick up whatever you got left.

Please specify beer or soda.

-tom

1TFROT · 05-07-2003, 10:49 PM

Greg, this is Steve,

do you still have a main from an S10 or (specifically a Z)?

I need a main. can you ship?

I know UPS has an "as is" shipping style.

please let me know.

sfazr2 · 05-08-2003, 12:42 AM

I do have the leaf packs but i've already claimed them to someone else. If they bail then I'll give them to you. I'm about 99.9% sure though that all the s-10 leaves are the same, just the mounts on the frame are different.

1TFROT · 05-08-2003, 10:06 AM

sweet, thanks.

I'll take them if the person ahead of me bails.

I'll take the whole pack if need be, but I just need the main leaf for one side.

thanks again

sfazr2 · 05-08-2003, 06:24 PM

If one of you local knucle heads don't come and get this stuff like you say you are, I'm going to dump it over at SIMS metal. I've put my phone number up and no one has called me. For guys that are long distance, I think I already know what to save and you're waiting on me.

1TFROT · 05-11-2003, 08:58 PM

any word yet, Greg?

just curious.

04-25-2003, 10:21 AM	#1
sfazr2 Registered User Join Date: Oct 2001 Member # 7756 Location: Sacramento, Kaleeforneeia Posts: 433	FFFRRREEEEBBBBIIIIEEEE. Leaf springs 2.5" wide San Jo. CA Leaf springs...get your leaf springs. All different lengths. Not too saggy either. Will have a 52" main available soon. The rest are support leaves. Even have overload leafs. Greg 408-685-6726 Edit: I've been getting guys asking me if I have any springs for a particular vehicle. These came from s-10's and cherokees. But if your springs are 2.5" wide, I don't see why they wouldnt work. __________________ I was pretty proud of myself when I put on a large sized condom and it fit, untill I saw the label...."Made in Japan" Last edited by sfazr2; 05-06-2003 at 06:58 PM.

04-25-2003, 03:46 PM	#2
Flatty Registered User Join Date: Feb 2000 Member # 29 Location: San Mateo, CA Posts: 5,410	You got any 3/4 ton springs? I want to 1/4 my rear, and need some 3/4 ton springs. Dimtiri __________________ CJ3A in the works

04-25-2003, 04:58 PM	#3
sfazr2 Registered User Join Date: Oct 2001 Member # 7756 Location: Sacramento, Kaleeforneeia Posts: 433	hope this helps Couldn't you just build a thicker leaf pack. I just have a pretty large assortment of leaves. I do have some with eyeletts that you could use as a main. I'm not real familiar with how the 1/4 is setup. I've seen it but not in detail. These leaves came from the back of s-10's and cherokee's. As far as I know the 3/4 ton's just had more 2.5" springs than the 1/2 ton. __________________ I was pretty proud of myself when I put on a large sized condom and it fit, untill I saw the label...."Made in Japan"

04-28-2003, 12:22 AM	#5
sfazr2 Registered User Join Date: Oct 2001 Member # 7756 Location: Sacramento, Kaleeforneeia Posts: 433	uuummm I used the cherokee mains to do my buggy springs thus just the rest of the pack... I'm sure otherwise you could build a whole set from what i have. I do have an s-10 main available (52") with you choice of lengths for the rest of the pack. __________________ I was pretty proud of myself when I put on a large sized condom and it fit, untill I saw the label...."Made in Japan"

04-28-2003, 04:34 PM	#6
D-RAT Registered User Join Date: Mar 2003 Member # 17554 Location: Mesa, AZ Posts: 162	If you got a couple with some decent arch and are about 30" long with the hole in the middle of the span, I'll take a pair of leaves. Work up shipping to 85206 zip code and PM me if you can help me out. Thanks! __________________ 1998 Nissan Frontier - The Other White Meat www.nissan4wheelers.com

04-27-2003, 11:04 PM	#4
INFAMOUSBUTCHER Banned Join Date: Mar 2003 Member # 18371 Location: MIDDLETOWN NORCAL Posts: 872	you still have these leafs? if so how many cherokee pairs do you have? im very interested

04-28-2003, 06:13 PM	#7
sfazr2 Registered User Join Date: Oct 2001 Member # 7756 Location: Sacramento, Kaleeforneeia Posts: 433	leaves just how many leaves in a pair do you need? how far off center can the holes be. And shipping? sure it's worth it? Checked with a local junk yard? __________________ I was pretty proud of myself when I put on a large sized condom and it fit, untill I saw the label...."Made in Japan"

04-28-2003, 08:41 PM	#8
D-RAT Registered User Join Date: Mar 2003 Member # 17554 Location: Mesa, AZ Posts: 162	Just looking for two single leaves. My laziness and lack of free time has kept me out of the yards. Would pay $25 shipped for 2 good leaves that are the size I'm looking for. __________________ 1998 Nissan Frontier - The Other White Meat www.nissan4wheelers.com

04-30-2003, 12:41 AM	#9
Janoso Registered User Join Date: Dec 2002 Member # 15558 Location: Grants Pass, Or Posts: 234	springs how many leaves or pairs of leaves do you have? I could possibly take them off your hands. Janos

04-30-2003, 02:01 AM	#10
Brutpwr Zeus of the Sluice Join Date: Mar 2000 Member # 481 Location: San Jose, CA, USA Posts: 3,674	Need some leafs to play around with on my Toyota and my bike trailer which is on Wrangler 4" springs! Let me know if you have anything left and I'll swing on by! Jason

04-30-2003, 08:45 AM	#11
sfazr2 Registered User Join Date: Oct 2001 Member # 7756 Location: Sacramento, Kaleeforneeia Posts: 433	not exactly sure I'm not sure how many leafs i have. I'll be happy to pull them out and let you guys have at them. Give me a call at 408-685-6726 to get my address. __________________ I was pretty proud of myself when I put on a large sized condom and it fit, untill I saw the label...."Made in Japan"

05-01-2003, 05:24 PM	#12
Skeezr Registered User Join Date: Mar 2003 Member # 18130 Location: San Jose Posts: 34	what size of overload springs u have im interested by the way do u have any u bolt plates for a dana 30

05-01-2003, 07:43 PM	#13
sfazr2 Registered User Join Date: Oct 2001 Member # 7756 Location: Sacramento, Kaleeforneeia Posts: 433	I have 4 overload springs I took all of my overload springs out. They're 2.5" wide and about 24" ish long. They're about 3/8" thick at the center. I do have dana 30 plates but i'm trying to save them for the buyer of my axle so it's a complete bolt in. __________________ I was pretty proud of myself when I put on a large sized condom and it fit, untill I saw the label...."Made in Japan"

05-02-2003, 02:33 PM	#14
Skeezr Registered User Join Date: Mar 2003 Member # 18130 Location: San Jose Posts: 34	Ill take 2 of your overload springs when do you want to do this

05-02-2003, 02:49 PM	#15
sfazr2 Registered User Join Date: Oct 2001 Member # 7756 Location: Sacramento, Kaleeforneeia Posts: 433	ok Today if possible. I'll be out of town for the weekend. I don't fly out untill 8pm so sometime before 6pm...i'm probably home all day 408-685-6726 __________________ I was pretty proud of myself when I put on a large sized condom and it fit, untill I saw the label...."Made in Japan"

05-06-2003, 01:32 PM	#16
Flatty Registered User Join Date: Feb 2000 Member # 29 Location: San Mateo, CA Posts: 5,410	Do you have any Ford F250/350 springs? Dimitri __________________ CJ3A in the works

05-06-2003, 02:09 PM	#17
sfazr2 Registered User Join Date: Oct 2001 Member # 7756 Location: Sacramento, Kaleeforneeia Posts: 433	um er... no they're like 3" wide right? no all of mine are 2.5" __________________ I was pretty proud of myself when I put on a large sized condom and it fit, untill I saw the label...."Made in Japan"

05-07-2003, 11:34 AM	#18
Flatty Registered User Join Date: Feb 2000 Member # 29 Location: San Mateo, CA Posts: 5,410	Not all of them. Some of them are 2.5" wide Dimitri __________________ CJ3A in the works

05-07-2003, 12:53 PM	#19
sfazr2 Registered User Join Date: Oct 2001 Member # 7756 Location: Sacramento, Kaleeforneeia Posts: 433	as edited above I edited in my first post that these are from s-10's and cherokees, but as far as i know a leaf spring is a leaf spring, just depends on the width and the how stiff you want it (lenght) To a point arch makes a difference but probably 90% of the leaf sprung vehicles out there have a pretty standard arch. __________________ I was pretty proud of myself when I put on a large sized condom and it fit, untill I saw the label...."Made in Japan"

05-07-2003, 07:19 PM	#20
LandCroozer Registered User Join Date: Feb 2003 Member # 16812 Location: Tacoma, WA Magazine: crawlmag.com Posts: 1,226	Free springs? If you're in San Jose like you're tag says, PM me and I'll come by with a six pack for ya and pick up whatever you got left. Please specify beer or soda. -tom

05-07-2003, 10:49 PM	#21
1TFROT Registered User Join Date: May 2002 Member # 11985 Location: chi-town Posts: 1,192	Greg, this is Steve, do you still have a main from an S10 or (specifically a Z)? I need a main. can you ship? I know UPS has an "as is" shipping style. please let me know. __________________ fawk this, let's go wheelin

05-08-2003, 12:42 AM	#22
sfazr2 Registered User Join Date: Oct 2001 Member # 7756 Location: Sacramento, Kaleeforneeia Posts: 433	well.... I do have the leaf packs but i've already claimed them to someone else. If they bail then I'll give them to you. I'm about 99.9% sure though that all the s-10 leaves are the same, just the mounts on the frame are different. __________________ I was pretty proud of myself when I put on a large sized condom and it fit, untill I saw the label...."Made in Japan"

05-08-2003, 10:06 AM	#23
1TFROT Registered User Join Date: May 2002 Member # 11985 Location: chi-town Posts: 1,192	sweet, thanks. I'll take them if the person ahead of me bails. I'll take the whole pack if need be, but I just need the main leaf for one side. thanks again __________________ fawk this, let's go wheelin

05-08-2003, 06:24 PM	#24
sfazr2 Registered User Join Date: Oct 2001 Member # 7756 Location: Sacramento, Kaleeforneeia Posts: 433	AAHHH If one of you local knucle heads don't come and get this stuff like you say you are, I'm going to dump it over at SIMS metal. I've put my phone number up and no one has called me. For guys that are long distance, I think I already know what to save and you're waiting on me. __________________ I was pretty proud of myself when I put on a large sized condom and it fit, untill I saw the label...."Made in Japan"

05-11-2003, 08:58 PM	#25
1TFROT Registered User Join Date: May 2002 Member # 11985 Location: chi-town Posts: 1,192	any word yet, Greg? just curious. __________________ fawk this, let's go wheelin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode