Price droped 96 nissan SAS exo cage dual t-cases dana 44 Reno, NV $6,500 firm

leroytyler · 09-30-2006, 12:33 PM

I had this truck listed at the begining of the summer and decided not to sell it. I don't have the time to use it and I have to many other hobbies to justify keeping it. I recently took it into the Reno Nissan dealer to have it looked at to make sure everything was in perfect mechanical shape ( it had a rough idle) as I thought I was going to do the Rubicon but never did. It checked out ok on all the computer codes. They did replace the fuel filter. The truck runs great now and needs nothing. I did all the little maintance things at the beginging of the summer including replaced all the belts, battery, air filter, plugs, cap, and rotor, and an oil change. This truck is very capable. The design of the cage is a little funky. If I were to keep it I planned on cuting off a bunch of the cage and making it into a partial buggy, but it still works great the way it is. I also have an extra set of black steel rims included I was going to use for weld on bead locks and I also have an extra dana 20 included that I was going to have rebuilt with the tera 3.5 to 1 gears (link to product review http://www.off-road.com/jeep/tech/co...rad20/tera.htm) And I want to be totally honest I rolled the truck on it's side the second time I took it out. The pics are included. It caused no damage. The truck started and wheeled the rest of the day and drove home fine after we winched it back on it's wheels. Here are the specs 1996 Nissan Hard body -- four cylinder with approximately 68,000 highway miles, Approximately 30 miles on trails -- power windows and locks -- sunroof -- CD player, nice speakers -- AC, heat, defrost work great -- Rhino lined interior -- new optima red top battery -- Front end Adjustable 6-14 inches of lift with air bags -- Dual transfer cases, Dana 20 case sitting on custom built cross member behind stock transfer case (super low crawl ratio) -- 38 inch super swampers with room for 40-42 inch tires -- Warn front hubs -- Warn winch bolt pattern on custom front bumper -- Custom Exo cage -- Rear axle is Ford 9 inch (5:89) gears, spooled locker -- Front axle is Dana 44 (5:89) gears, Detroit Easy Locker -- custom made drive shafts from drive line services -- long travel Rancho RS 5000 shocks -- Custom high lift mount and jack under bed -- Over $25,000 invested into custom work, not including stock truck $7,000 firm or partial trade I'm looking for a 99 or newer ford F250 crew cab or 2002 or newer chevy 2500 crew cab or 2007 ski doo mxzx-rs 775-424-3919 530-386-3603

leroytyler · 09-30-2006, 12:37 PM

leroytyler · 09-30-2006, 12:38 PM

leroytyler · 09-30-2006, 12:39 PM

leroytyler · 09-30-2006, 12:40 PM

4 the goat · 09-30-2006, 08:22 PM

can this truck be driven at highway speeds without problems. also where are you located?

leroytyler · 09-30-2006, 08:40 PM

The truck is in Reno, NV. It can be driven at highway speeds. I have gotten the truck up to 70 mph on the highway. The tires have never been balanced and they are bias ply, so there is some wheel shake. If the tires were balanced it would probally fix the problem. I would suggest getting radial tires if you wanted to drive the truck on the street a lot. I have an extra seet of rims for the truck that I was going to make beed locks with, that could be used for highway tires.

leroytyler · 10-02-2006, 12:32 AM

top

leroytyler · 10-03-2006, 02:48 PM

top

leroytyler · 10-05-2006, 10:00 PM

tttoooppppp

PARTYHOUND · 10-05-2006, 10:09 PM

Back to selling this thing again?

You remember me? I almost bought this thing a couple of years ago when the dude that built it still had it. I met ya up at moonrocks and we had some beers. Shit man, before ya sell it, lets go hit the con this weekend. Meet ya up there tomorrow night...

leroytyler · 10-12-2006, 12:04 AM

I would like to do the rubi but I want to sell this thing to get a new sled. Maby I'll see ya at moonrocks some time on my dirt bike.

leroytyler · 10-17-2006, 07:16 PM

top

leroytyler · 10-20-2006, 12:06 PM

top

yamaha628 · 10-20-2006, 01:43 PM

would you be willing to trade??....
http://sfbay.craigslist.org/sby/car/222445648.html

leroytyler · 10-23-2006, 02:15 AM

top

leroytyler · 10-24-2006, 09:29 PM

top

leroytyler · 11-03-2006, 04:31 PM

top

kedrom034 · 11-06-2006, 07:26 PM

Will you trade for a 1943 Willy's Rockcrawler. SB 350, 4 speed, 205 T-case, fullsize axles.

ford381stroker · 11-06-2006, 08:36 PM

nice rig. I have seen it other places ebay maybe. Love it. Looks like a really well built rig.

84moneypit · 11-26-2006, 02:53 PM

Well after a 22 hour drive I have the truck home. I cleaned it up, fixed a couple things, and took it out for a minute today. Flexes like a son of a bitch and rides like a Caddillac. Thanks Tyler, this is one sweet bad ass truck and I feel like a kid on Christmas morning. Thanks again.

09-30-2006, 12:33 PM	#1
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34	Price droped 96 nissan SAS exo cage dual t-cases dana 44 Reno, NV $6,500 firm I had this truck listed at the begining of the summer and decided not to sell it. I don't have the time to use it and I have to many other hobbies to justify keeping it. I recently took it into the Reno Nissan dealer to have it looked at to make sure everything was in perfect mechanical shape ( it had a rough idle) as I thought I was going to do the Rubicon but never did. It checked out ok on all the computer codes. They did replace the fuel filter. The truck runs great now and needs nothing. I did all the little maintance things at the beginging of the summer including replaced all the belts, battery, air filter, plugs, cap, and rotor, and an oil change. This truck is very capable. The design of the cage is a little funky. If I were to keep it I planned on cuting off a bunch of the cage and making it into a partial buggy, but it still works great the way it is. I also have an extra set of black steel rims included I was going to use for weld on bead locks and I also have an extra dana 20 included that I was going to have rebuilt with the tera 3.5 to 1 gears (link to product review http://www.off-road.com/jeep/tech/co...rad20/tera.htm) And I want to be totally honest I rolled the truck on it's side the second time I took it out. The pics are included. It caused no damage. The truck started and wheeled the rest of the day and drove home fine after we winched it back on it's wheels. Here are the specs 1996 Nissan Hard body -- four cylinder with approximately 68,000 highway miles, Approximately 30 miles on trails -- power windows and locks -- sunroof -- CD player, nice speakers -- AC, heat, defrost work great -- Rhino lined interior -- new optima red top battery -- Front end Adjustable 6-14 inches of lift with air bags -- Dual transfer cases, Dana 20 case sitting on custom built cross member behind stock transfer case (super low crawl ratio) -- 38 inch super swampers with room for 40-42 inch tires -- Warn front hubs -- Warn winch bolt pattern on custom front bumper -- Custom Exo cage -- Rear axle is Ford 9 inch (5:89) gears, spooled locker -- Front axle is Dana 44 (5:89) gears, Detroit Easy Locker -- custom made drive shafts from drive line services -- long travel Rancho RS 5000 shocks -- Custom high lift mount and jack under bed -- Over $25,000 invested into custom work, not including stock truck $7,000 firm or partial trade I'm looking for a 99 or newer ford F250 crew cab or 2002 or newer chevy 2500 crew cab or 2007 ski doo mxzx-rs 775-424-3919 530-386-3603

10-05-2006, 10:09 PM	#11
PARTYHOUND Registered User Join Date: Jun 2005 Member # 49052 Location: Ennis, MT Posts: 452	Back to selling this thing again? You remember me? I almost bought this thing a couple of years ago when the dude that built it still had it. I met ya up at moonrocks and we had some beers. Shit man, before ya sell it, lets go hit the con this weekend. Meet ya up there tomorrow night... __________________ Exo'ed 83 yota with some stuff.

11-26-2006, 02:53 PM	#21
84moneypit Registered User Join Date: Aug 2006 Member # 77542 Location: Southern Utah Posts: 161	Sold!!!!! Well after a 22 hour drive I have the truck home. I cleaned it up, fixed a couple things, and took it out for a minute today. Flexes like a son of a bitch and rides like a Caddillac. Thanks Tyler, this is one sweet bad ass truck and I feel like a kid on Christmas morning. Thanks again. __________________ '96 Hardbody, SAS, 44F, 9"R, duel cases, twin sticked, exo-d, 38" TSL's, spool, Detroit, 5.89's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-30-2006, 12:37 PM	#2
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34

09-30-2006, 12:38 PM	#3
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34

09-30-2006, 12:39 PM	#4
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34

09-30-2006, 12:40 PM	#5
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34

09-30-2006, 08:22 PM	#6
4 the goat Registered User Join Date: Sep 2006 Member # 79830 Posts: 195	can this truck be driven at highway speeds without problems. also where are you located?

09-30-2006, 08:40 PM	#7
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34	The truck is in Reno, NV. It can be driven at highway speeds. I have gotten the truck up to 70 mph on the highway. The tires have never been balanced and they are bias ply, so there is some wheel shake. If the tires were balanced it would probally fix the problem. I would suggest getting radial tires if you wanted to drive the truck on the street a lot. I have an extra seet of rims for the truck that I was going to make beed locks with, that could be used for highway tires.

10-02-2006, 12:32 AM	#8
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34	top

10-03-2006, 02:48 PM	#9
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34	top

10-05-2006, 10:00 PM	#10
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34	tttoooppppp

10-12-2006, 12:04 AM	#12
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34	I would like to do the rubi but I want to sell this thing to get a new sled. Maby I'll see ya at moonrocks some time on my dirt bike.

10-17-2006, 07:16 PM	#13
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34	top

10-20-2006, 12:06 PM	#14
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34	top

10-20-2006, 01:43 PM	#15
yamaha628 Registered User Join Date: Oct 2006 Member # 80686 Posts: 75	would you be willing to trade??.... http://sfbay.craigslist.org/sby/car/222445648.html

10-23-2006, 02:15 AM	#16
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34	top

10-24-2006, 09:29 PM	#17
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34	top

11-03-2006, 04:31 PM	#18
leroytyler Registered User Join Date: May 2006 Member # 73228 Posts: 34	top

11-06-2006, 07:26 PM	#19
kedrom034 Registered User Join Date: Nov 2006 Member # 81698 Location: Red Bluff, CA Posts: 58	Will you trade for a 1943 Willy's Rockcrawler. SB 350, 4 speed, 205 T-case, fullsize axles.

11-06-2006, 08:36 PM	#20
ford381stroker Registered User Join Date: Mar 2006 Member # 69608 Location: Springfield, MO Posts: 608	nice rig. I have seen it other places ebay maybe. Love it. Looks like a really well built rig.