Chandlers rig -
Here are the specs -
Front - 3 link - Using 2.5" lowers 2" upper 7075-T6 (tierod 2")
3.0 Ballistic Joints
18" 2.5 Saws
Full PSC hydro
Front pushed way forward (21")- WB will be at 115
Ride hieght 21.5" to bottom of frame with 4.5" of up travel with 42's -
Axles - 14 bolt front & rear
I did about 60 hours of solid modeling to get the numbers where I wanted them should work very well.
Let the truck porn begin -
Ifs - gone
He bought Rad Ryans built 44 and diamond -
Chandler wanted this killer truss -
rotate the knuckles -
Had to raise the altinator and motor mount to clear the upper link at full stuff.
New altinator bracket -
Here are the specs -
Front - 3 link - Using 2.5" lowers 2" upper 7075-T6 (tierod 2")
3.0 Ballistic Joints
18" 2.5 Saws
Full PSC hydro
Front pushed way forward (21")- WB will be at 115
Ride hieght 21.5" to bottom of frame with 4.5" of up travel with 42's -
Axles - 14 bolt front & rear
I did about 60 hours of solid modeling to get the numbers where I wanted them should work very well.
Let the truck porn begin -
Ifs - gone
He bought Rad Ryans built 44 and diamond -
Chandler wanted this killer truss -
rotate the knuckles -
Had to raise the altinator and motor mount to clear the upper link at full stuff.
New altinator bracket -