PolyBushings (a few different sizes) - Pirate4x4.Com : 4x4 and Off-Road Forum

TJ Fan · 04-26-2005, 01:24 PM

Here are some of the bushings we manufacturer and use at Mad4wd.

Black Poly Bushing (smaller of the two):
- 9/16" Bore
-Gold Zinc Plated Sleeve.
- 2.850" Long, 1.880" Dia. and .188 Wall Thickness (3/16") DOM.
Price: 10.00 per assy.

Red Poly Bushing (larger of the two):
- Available in TWO bore sizes: 9/16" and 5/8"
-Thick Gold Zinc Plated Sleeves.
3.250" Long, 2.250" Dia and .188" Wall Thickness (3/16") DOM.
-Beefy

...they weigh 1.5 lbs per bushing.
Price: 15.00 per assy.

Qty pricing is available.

Please call MAD4WD @ 330-549-9082

Thanks,
Larry

BrettM · 04-26-2005, 02:40 PM

are they the same "hardness"?

TJ Fan · 04-26-2005, 02:59 PM

BrettM,
Yes, one is just larger than the other. We use the larger one when we make control arms out of 2.00" OD. There is a lot more material to take abuse on the larger ones. The edges are also beveled on the large bushings so they will line up and slip in and out of the tabs easier.

thanks
Larry

1972CJ5+1 · 05-13-2005, 09:09 PM

Does this include the DOM, or is it just the bushings and sleeve? These would work perfect on my transmission crossmember.

BrettM · 05-14-2005, 12:12 AM

it includes the DOM, isn't that obvious from the description (and pictures)?

1972CJ5+1 · 05-14-2005, 07:46 AM

It looks pretty obvious, but since I was going to go with a larger bushing than I have been using, I was inquiring as to if I also needed to purchase an additional size DOM. Are you affiliated with this company, or just a freelance comment maker? If you are, thanks for the info. If not, why do you feel you have to grunt at everybody that walks by your cage? This isn't the tech section. I should be able to ask a vendor a question, even if you think it is a stupid one, without your input. If the vendor thinks I am a dumbass, let him tell me.

BrettM · 05-14-2005, 01:42 PM

Quote:

Originally Posted by 1972CJ5+1

It looks pretty obvious, but since I was going to go with a larger bushing than I have been using, I was inquiring as to if I also needed to purchase an additional size DOM. Are you affiliated with this company, or just a freelance comment maker? If you are, thanks for the info. If not, why do you feel you have to grunt at everybody that walks by your cage? This isn't the tech section. I should be able to ask a vendor a question, even if you think it is a stupid one, without your input. If the vendor thinks I am a dumbass, let him tell me.

I am not affiliated with the vendor, but I bought a few of the small ones from him last week.

SlamChops · 05-15-2005, 04:12 PM

can i get a quote on four 5/8" bushings sets to 36605

BrettM · 05-15-2005, 07:45 PM

Quote:

Originally Posted by SlamChops

can i get a quote on four 5/8" bushings sets to 36605

these guys don't do the quote by PM or post thing, CALL them and you will get great service.

SlamChops · 05-16-2005, 06:26 PM

word. i'll hit em up tomorrow then. 'preciate it.

TJ Fan · 05-18-2005, 03:07 PM

Slamchops,
Hit us up @ 330-549-9082

Thanks,
Larry

SlamChops · 05-19-2005, 06:40 PM

i ordered mine today. thanks again!

TJ Fan · 11-08-2005, 08:34 AM

Thanks,
Larry

Mad4wd · 02-22-2006, 08:40 AM

Our Poly Bushing kits are now accompanied by greasable grade 8 bolts, and a little pretty zert cap. Give us a call on sizing and pricing, and if you have any other questions. Tanner---330-549-9082

Mad4wd · 11-16-2006, 01:56 PM

Use these with our greaseable bolt kits

04-26-2005, 01:24 PM	#1 (permalink)
TJ Fan Registered User Join Date: Aug 2002 Member # 13410 Location: Ohio Posts: 807	PolyBushings (a few different sizes) Here are some of the bushings we manufacturer and use at Mad4wd. Black Poly Bushing (smaller of the two): - 9/16" Bore -Gold Zinc Plated Sleeve. - 2.850" Long, 1.880" Dia. and .188 Wall Thickness (3/16") DOM. Price: 10.00 per assy. Red Poly Bushing (larger of the two): - Available in TWO bore sizes: 9/16" and 5/8" -Thick Gold Zinc Plated Sleeves. 3.250" Long, 2.250" Dia and .188" Wall Thickness (3/16") DOM. -Beefy ...they weigh 1.5 lbs per bushing. Price: 15.00 per assy. Qty pricing is available. Please call MAD4WD @ 330-549-9082 Thanks, Larry Attached Images __________________ [url]WWW.MAD4WD.COM[/url] Phone: 330-549-9082 Custom Axles, CNC Machining (Vertical, Horizontal and Lathe Work), Welding and Bending [URL="http://www.mad4wd.com/tek9.asp?pg=rockcrusher"] Custom Ford 9", Dana 44 & Dana 60 Axles[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&grp=310"]Dana 60 & Dana 44 High Steer Arms[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&specific=jrgrkme0"]Tube Clamps[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&grp=290"]Bilstein Shocks - In Stock[/URL] Last edited by TJ Fan; 11-08-2005 at 08:34 AM.

04-26-2005, 02:40 PM	#2 (permalink)
BrettM Registered User Join Date: May 2002 Member # 11998 Location: Michifornia Posts: 4,025	are they the same "hardness"? __________________ awshifting.com awshifting@gmail.com

04-26-2005, 02:59 PM	#3 (permalink)
TJ Fan Registered User Join Date: Aug 2002 Member # 13410 Location: Ohio Posts: 807	BrettM, Yes, one is just larger than the other. We use the larger one when we make control arms out of 2.00" OD. There is a lot more material to take abuse on the larger ones. The edges are also beveled on the large bushings so they will line up and slip in and out of the tabs easier. thanks Larry __________________ [url]WWW.MAD4WD.COM[/url] Phone: 330-549-9082 Custom Axles, CNC Machining (Vertical, Horizontal and Lathe Work), Welding and Bending [URL="http://www.mad4wd.com/tek9.asp?pg=rockcrusher"] Custom Ford 9", Dana 44 & Dana 60 Axles[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&grp=310"]Dana 60 & Dana 44 High Steer Arms[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&specific=jrgrkme0"]Tube Clamps[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&grp=290"]Bilstein Shocks - In Stock[/URL]

05-13-2005, 09:09 PM	#4 (permalink)
1972CJ5+1 Registered User Join Date: Dec 2002 Member # 15811 Location: Oakdale CA Posts: 1,936	Does this include the DOM, or is it just the bushings and sleeve? These would work perfect on my transmission crossmember. __________________ [COLOR="Lime"][SIZE="3"][B]booger weldz [/B][/SIZE]alternate account[/COLOR] 1994 fzj80 Elockers front and rear, 35 km2s, 10k winch, coolest station wagon in the world!! [COLOR="Silver"]♣[/COLOR][B][COLOR="Lime"][FONT="Arial Black"][B]Bink'sFab[/B][/FONT][/B][/color][COLOR="Silver"]rication[/COLOR][COLOR="Lime"]♣[/COLOR] - [URL="http://facebook.com/binksfab"]facebook.com/binksfab[/URL]

05-14-2005, 12:12 AM	#5 (permalink)
BrettM Registered User Join Date: May 2002 Member # 11998 Location: Michifornia Posts: 4,025	it includes the DOM, isn't that obvious from the description (and pictures)? __________________ awshifting.com awshifting@gmail.com

05-14-2005, 07:46 AM	#6 (permalink)
1972CJ5+1 Registered User Join Date: Dec 2002 Member # 15811 Location: Oakdale CA Posts: 1,936	It looks pretty obvious, but since I was going to go with a larger bushing than I have been using, I was inquiring as to if I also needed to purchase an additional size DOM. Are you affiliated with this company, or just a freelance comment maker? If you are, thanks for the info. If not, why do you feel you have to grunt at everybody that walks by your cage? This isn't the tech section. I should be able to ask a vendor a question, even if you think it is a stupid one, without your input. If the vendor thinks I am a dumbass, let him tell me. __________________ [COLOR="Lime"][SIZE="3"][B]booger weldz [/B][/SIZE]alternate account[/COLOR] 1994 fzj80 Elockers front and rear, 35 km2s, 10k winch, coolest station wagon in the world!! [COLOR="Silver"]♣[/COLOR][B][COLOR="Lime"][FONT="Arial Black"][B]Bink'sFab[/B][/FONT][/B][/color][COLOR="Silver"]rication[/COLOR][COLOR="Lime"]♣[/COLOR] - [URL="http://facebook.com/binksfab"]facebook.com/binksfab[/URL]

05-15-2005, 04:12 PM	#8 (permalink)
SlamChops Registered User Join Date: May 2003 Member # 19372 Location: Mobtown, AL Posts: 1,517	can i get a quote on four 5/8" bushings sets to 36605 __________________ Later on, Walter P. [URL=http://www.lockitupoffroad.net]Lock It Up Off-Road[/URL]

05-16-2005, 06:26 PM	#10 (permalink)
SlamChops Registered User Join Date: May 2003 Member # 19372 Location: Mobtown, AL Posts: 1,517	word. i'll hit em up tomorrow then. 'preciate it. __________________ Later on, Walter P. [URL=http://www.lockitupoffroad.net]Lock It Up Off-Road[/URL]

05-18-2005, 03:07 PM	#11 (permalink)
TJ Fan Registered User Join Date: Aug 2002 Member # 13410 Location: Ohio Posts: 807	Slamchops, Hit us up @ 330-549-9082 Thanks, Larry __________________ [url]WWW.MAD4WD.COM[/url] Phone: 330-549-9082 Custom Axles, CNC Machining (Vertical, Horizontal and Lathe Work), Welding and Bending [URL="http://www.mad4wd.com/tek9.asp?pg=rockcrusher"] Custom Ford 9", Dana 44 & Dana 60 Axles[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&grp=310"]Dana 60 & Dana 44 High Steer Arms[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&specific=jrgrkme0"]Tube Clamps[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&grp=290"]Bilstein Shocks - In Stock[/URL]

05-19-2005, 06:40 PM	#12 (permalink)
SlamChops Registered User Join Date: May 2003 Member # 19372 Location: Mobtown, AL Posts: 1,517	i ordered mine today. thanks again! __________________ Later on, Walter P. [URL=http://www.lockitupoffroad.net]Lock It Up Off-Road[/URL]

11-08-2005, 08:34 AM	#13 (permalink)
TJ Fan Registered User Join Date: Aug 2002 Member # 13410 Location: Ohio Posts: 807	Thanks, Larry __________________ [url]WWW.MAD4WD.COM[/url] Phone: 330-549-9082 Custom Axles, CNC Machining (Vertical, Horizontal and Lathe Work), Welding and Bending [URL="http://www.mad4wd.com/tek9.asp?pg=rockcrusher"] Custom Ford 9", Dana 44 & Dana 60 Axles[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&grp=310"]Dana 60 & Dana 44 High Steer Arms[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&specific=jrgrkme0"]Tube Clamps[/URL] [URL="http://www.mad4wd.com/tek9.asp?pg=products&grp=290"]Bilstein Shocks - In Stock[/URL]

02-22-2006, 08:40 AM	#14 (permalink)
Mad4wd Registered User Join Date: Feb 2006 Member # 67147 Location: Youngstown, OH Posts: 140	Poly Bushings *Our Poly Bushing kits are now accompanied by greasable grade 8 bolts, and a little pretty zert cap. Give us a call on sizing and pricing, and if you have any other questions. Tanner---330-549-9082* __________________ [url]WWW.MAD4WD.COM[/url] Phone: 330-549-9082 [URL="http://madmfg.com/index.php?main_page=page&id=8&chapter=0"] Custom Ford 9", Dana 44 & Dana 60 Axles[/URL] [URL="http://madmfg.com/index.php?main_page=index&cPath=28"]Dana 60 & Dana 44 High Steer Arms[/URL] [URL="http://madmfg.com/index.php?main_page=index&cPath=19"]Tube Clamps[/URL] [URL="http://madmfg.com/index.php?main_page=index&cPath=16"]Bilstein Shocks - In Stock[/URL]

11-16-2006, 01:56 PM	#15 (permalink)
Mad4wd Registered User Join Date: Feb 2006 Member # 67147 Location: Youngstown, OH Posts: 140	Use these with our greaseable bolt kits __________________ [url]WWW.MAD4WD.COM[/url] Phone: 330-549-9082 [URL="http://madmfg.com/index.php?main_page=page&id=8&chapter=0"] Custom Ford 9", Dana 44 & Dana 60 Axles[/URL] [URL="http://madmfg.com/index.php?main_page=index&cPath=28"]Dana 60 & Dana 44 High Steer Arms[/URL] [URL="http://madmfg.com/index.php?main_page=index&cPath=19"]Tube Clamps[/URL] [URL="http://madmfg.com/index.php?main_page=index&cPath=16"]Bilstein Shocks - In Stock[/URL]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode