Added a few items this week..... - Pirate4x4.Com : 4x4 and Off-Road Forum

Gravel Maker · 04-17-2006, 07:46 AM

These were designed mostly for the FJ40 and Toy mini.....but theres no law on what you use them on.

-----Edit----- We have made these in 5 widths for over 4 years now...

Put together a couple of new Spring hangers.....

For 2.75" springs (3.0" ID)for the GM 63" spring swap

And for 2.5" springs (2.75" ID)

They come with the ramp welded in or unwelded, your choice. The 2.75 models are great for pushing your front hangers another 1" forward on a Cruiser during a reversal, the boxing of the ramp reduces additional support requirements. They are both $32 a pair unwelded before the PBB10 discount.

We also added a Chassis Link bracket of the same style, basically our Chassis link Tabs connected by both a bent bridge and a ramp to equal the strength of our .375 Tabs. They are $43 a pair before the discount, I will show both here.

These also come unwelded but you can see the effect the bridge has on them, the lower pic is of our .375" chassis tabs ($21.50 p/pair).

Gravel Maker · 04-18-2006, 04:48 PM

The drop from the mounting surface is 2.0" for the Chassis Link Bracket and 2.125" on the Spring Hangers. The hole on the Spring Hangers is in line with the front mounting surface so you don't lose any contact area for the weld.

Gravel Maker · 04-29-2006, 06:07 AM

Toy minis leading FJ40 by a slim margin....

98yj · 05-11-2006, 05:48 PM

Do you have any front spring hangers specifically for a Jeep YJ (Wrangler)?

Gravel Maker · 05-14-2006, 08:21 AM

We are adding 3 more hanger models over the next couple of weeks. Adding 45 items this month in all.

Check the website for updates.....

Gravel Maker · 05-30-2006, 10:01 AM

1/4" plate and 2.0" .25 wall DOM, these come with bushings and sleeves, available in 2", 2.5", and 2.75" widths. $42 before the pirate discount!

enjoy....

Jason4x4 · 11-03-2010, 12:06 AM

bump an old thread for ya

didn't see any where else to put these

Gravel Maker · 11-03-2010, 05:45 PM

Thanks! Those reinforcements have been with us 5 years and we never started a thread for them, maybe I will with all of them that we make...

Gravel Maker · 01-02-2011, 07:03 PM

A couple of staples back from the archives!

Gravel Maker · 01-30-2011, 06:08 PM

And back again, nothing wrong with the basics. Make'em right and make'em strong, right from the start! Thought I might also add that when someone copies them and calls them "all new brackets & tabs" they aren't all new...we have made them for 5 years...

they have been copied for a couple of years now by the other guy in NC!

Gravel Maker · 03-31-2011, 01:11 PM

Thats right, everything right from day 1

04-17-2006, 07:46 AM	#1 (permalink)
Gravel Maker Pirate4x4 Addict! Join Date: Aug 2005 Member # 51387 Location: Loomis, CA Posts: 11,442 Blog Entries: 2	Added a few items this week..... These were designed mostly for the FJ40 and Toy mini.....but theres no law on what you use them on. -----Edit----- We have made these in 5 widths for over 4 years now... Put together a couple of new Spring hangers..... For 2.75" springs (3.0" ID)for the GM 63" spring swap And for 2.5" springs (2.75" ID) They come with the ramp welded in or unwelded, your choice. The 2.75 models are great for pushing your front hangers another 1" forward on a Cruiser during a reversal, the boxing of the ramp reduces additional support requirements. They are both $32 a pair unwelded before the PBB10 discount. We also added a Chassis Link bracket of the same style, basically our Chassis link Tabs connected by both a bent bridge and a ramp to equal the strength of our .375 Tabs. They are $43 a pair before the discount, I will show both here. These also come unwelded but you can see the effect the bridge has on them, the lower pic is of our .375" chassis tabs ($21.50 p/pair). __________________ Dan Fredrickson www.ruffstuffspecialties.com ......"The NEW Industry Standard" Tech/Sales 916.600.1945 You can SAY anything, its what you DO that matters! The Official Repair Station of KOH!

04-18-2006, 04:48 PM	#2 (permalink)
Gravel Maker Pirate4x4 Addict! Join Date: Aug 2005 Member # 51387 Location: Loomis, CA Posts: 11,442 Blog Entries: 2	Sorry, been busy, got a couple of questions..... The drop from the mounting surface is 2.0" for the Chassis Link Bracket and 2.125" on the Spring Hangers. The hole on the Spring Hangers is in line with the front mounting surface so you don't lose any contact area for the weld. __________________ Dan Fredrickson www.ruffstuffspecialties.com ......"The NEW Industry Standard" Tech/Sales 916.600.1945 You can SAY anything, its what you DO that matters! The Official Repair Station of KOH!

04-29-2006, 06:07 AM	#3 (permalink)
Gravel Maker Pirate4x4 Addict! Join Date: Aug 2005 Member # 51387 Location: Loomis, CA Posts: 11,442 Blog Entries: 2	By the orders received you like them.... Toy minis leading FJ40 by a slim margin.... __________________ Dan Fredrickson www.ruffstuffspecialties.com ......"The NEW Industry Standard" Tech/Sales 916.600.1945 You can SAY anything, its what you DO that matters! The Official Repair Station of KOH!

05-14-2006, 08:21 AM	#5 (permalink)
Gravel Maker Pirate4x4 Addict! Join Date: Aug 2005 Member # 51387 Location: Loomis, CA Posts: 11,442 Blog Entries: 2	We should within 2 weeks..... We are adding 3 more hanger models over the next couple of weeks. Adding 45 items this month in all. Check the website for updates..... __________________ Dan Fredrickson www.ruffstuffspecialties.com ......"The NEW Industry Standard" Tech/Sales 916.600.1945 You can SAY anything, its what you DO that matters! The Official Repair Station of KOH!

05-30-2006, 10:01 AM	#6 (permalink)
Gravel Maker Pirate4x4 Addict! Join Date: Aug 2005 Member # 51387 Location: Loomis, CA Posts: 11,442 Blog Entries: 2	Added a couple of Shackle Hangers..... 1/4" plate and 2.0" .25 wall DOM, these come with bushings and sleeves, available in 2", 2.5", and 2.75" widths. $42 before the pirate discount! enjoy.... __________________ Dan Fredrickson www.ruffstuffspecialties.com ......"The NEW Industry Standard" Tech/Sales 916.600.1945 You can SAY anything, its what you DO that matters! The Official Repair Station of KOH!

05-11-2006, 05:48 PM	#4 (permalink)
98yj Registered User Join Date: Mar 2004 Member # 28881 Location: Ste. Agathe, Manitoba Posts: 27	Do you have any front spring hangers specifically for a Jeep YJ (Wrangler)?

11-03-2010, 12:06 AM	#7 (permalink)
Jason4x4 Granite Guru Join Date: Dec 2007 Member # 104033 Location: Chandler, AZ Posts: 974	bump an old thread for ya didn't see any where else to put these

11-03-2010, 05:45 PM	#8 (permalink)
Gravel Maker Pirate4x4 Addict! Join Date: Aug 2005 Member # 51387 Location: Loomis, CA Posts: 11,442 Blog Entries: 2	Thanks! Those reinforcements have been with us 5 years and we never started a thread for them, maybe I will with all of them that we make... __________________ Dan Fredrickson www.ruffstuffspecialties.com ......"The NEW Industry Standard" Tech/Sales 916.600.1945 You can SAY anything, its what you DO that matters! The Official Repair Station of KOH!

01-02-2011, 07:03 PM	#9 (permalink)
Gravel Maker Pirate4x4 Addict! Join Date: Aug 2005 Member # 51387 Location: Loomis, CA Posts: 11,442 Blog Entries: 2	A couple of staples back from the archives! __________________ Dan Fredrickson www.ruffstuffspecialties.com ......"The NEW Industry Standard" Tech/Sales 916.600.1945 You can SAY anything, its what you DO that matters! The Official Repair Station of KOH!

01-30-2011, 06:08 PM	#10 (permalink)
Gravel Maker Pirate4x4 Addict! Join Date: Aug 2005 Member # 51387 Location: Loomis, CA Posts: 11,442 Blog Entries: 2	And back again, nothing wrong with the basics. Make'em right and make'em strong, right from the start! Thought I might also add that when someone copies them and calls them "all new brackets & tabs" they aren't all new...we have made them for 5 years... they have been copied for a couple of years now by the other guy in NC! __________________ Dan Fredrickson www.ruffstuffspecialties.com ......"The NEW Industry Standard" Tech/Sales 916.600.1945 You can SAY anything, its what you DO that matters! The Official Repair Station of KOH!

03-31-2011, 01:11 PM	#11 (permalink)
Gravel Maker Pirate4x4 Addict! Join Date: Aug 2005 Member # 51387 Location: Loomis, CA Posts: 11,442 Blog Entries: 2	Thats right, everything right from day 1 __________________ Dan Fredrickson www.ruffstuffspecialties.com ......"The NEW Industry Standard" Tech/Sales 916.600.1945 You can SAY anything, its what you DO that matters! The Official Repair Station of KOH!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode