NEW BALLISTIC joints - 3.0" Housings with 3/4" Bore! - Pirate4x4.Com : 4x4 and Off-Road Forum

DrVic723 · 06-11-2007, 05:17 PM

The Massive 3.0" rebuildable BALLISTIC joint exclusively from Ballistic Fabrication is built to withstand extreme punishment. It's extra large 3/4" bore (bolt hole) is large enough to handle heavy torque, while the huge 3.0" diameter .210" wall housing accomodates over 25 degrees of misalignment both ways. The BALLISTIC joint features solid billet Nylatron GS races that won't deform under load. Designed to be paired with our X-16 Chromoly 1.25" joints. Fully greasable and rebuildable, available with a TIG welded extra-long 1020 CRS stud.

The Ballistic Joint next to a 1.25" rod end

$39.99! (welded stud and plating extra)

Purchase HERE!

Islandzuki · 06-12-2007, 01:22 PM

dayum those are sweet....great price too!!!!`

bggrnchvy · 06-12-2007, 08:45 PM

Very neat product, Ive been waiting for somebody to step up and offer a joint with more wearable surface area and larger through bolts for the fullsize guys. Tried to order 3 but the site keeps saying I didn't slect enough options even though I specified shank, thread hand and finish.

Ill give you guys a call tomorrow.

DrVic723 · 06-12-2007, 09:06 PM

Quote:

Originally Posted by bggrnchvy

Very neat product, Ive been waiting for somebody to step up and offer a joint with more wearable surface area and larger through bolts for the fullsize guys. Tried to order 3 but the site keeps saying I didn't slect enough options even though I specified shank, thread hand and finish.

Ill give you guys a call tomorrow.

That's strange, I'll check i tout and let you know if I figure it out... (I'm not the computer guy, that would be Nate and he's somewhere hiking in the Grand Canyon until the end of the week

)

DrVic723 · 06-12-2007, 09:08 PM

Okay, I think I fixed it.. give it a try now.

bggrnchvy · 06-13-2007, 12:10 AM

I really appreciate the quickness of your response. You fixed that hurdle but Ive run into a another, Ill PM you.

DrVic723 · 06-13-2007, 06:57 AM

It was not charging for the welded stud, but I think I have that fixed as well. Thanks for everyone's patience, looks like these may ship sooner than expected!

DrVic723 · 06-19-2007, 06:39 AM

Thanks for the orders!

DrVic723 · 06-25-2007, 06:55 AM

Any of those that ordered these have any install pics yet? I know we sent a whole bunch out at the end of last week so post em' up when you get them installed! Give us your first impressions! Thanks everyone for helping us move these so quickly

DrVic723 · 07-03-2007, 06:52 PM

intro sale pricing won't last long! We have hundreds in stock and ready to ship but they are going fast! Thanks for all of the support

Jeff

68crawler · 07-09-2007, 01:06 PM

I just recently bought all of the parts to build a rear 4-link set up from you (brackets, joints, tube insterts, jam nuts, etc....) Do these larger joints fit in all of your brackets? If so, I'd like to upgrade to these larger joints.

CORam · 07-09-2007, 11:35 PM

How wide is the joint? How about the 2.63" joint? Sorry if this sounds stupid, but does the 3" measurement refer to the diameter of the joint, or the width?

DrVic723 · 07-10-2007, 08:16 AM

3" x 3" , we offer most of our brackets in 3", but they are not all on the website. I'll look at your order and upgrage you. Thanks -Jeff

usmc_birthday · 07-10-2007, 08:51 AM

Can you make the studs in 1 1/8-7? My links are all ready taped for that size.

Brian

DrVic723 · 07-10-2007, 10:03 AM

Yes, I'll be running the studs in about two weeks, there will be a small custom programing fee as well that you will need to consider. Thanks -Jeff

usmc_birthday · 07-10-2007, 01:55 PM

Quote:

Originally Posted by DrVic723

Yes, I'll be running the studs in about two weeks, there will be a small custom programing fee as well that you will need to consider. Thanks -Jeff

So, how much would it be if I ordered eight 1 1/8-7 studs? And how wide is the base of the stud?

Thanks

DrVic723 · 07-11-2007, 09:22 PM

1.5" wide at the base, you tell us what they need to be coped to. They will be regular price + $70.00 setup charge. Thanks -Jeff

hineyman · 07-12-2007, 06:28 PM

How does the 25* of mis-alignment compare to your regular high mis-alignment spacers or should I say inserts?

DrVic723 · 07-12-2007, 07:49 PM

Our regular 1" - 3/4" misalignment spacers give just over 28 degrees. Thanks -Jeff

hineyman · 07-13-2007, 10:08 AM

Would these be a better setup for steering linkage over the heims and mis-alignment spacers I was about to buy from you?

DrVic723 · 07-13-2007, 03:17 PM

No, stick with the heims or tierod ends..

joe88xj · 07-15-2007, 11:16 AM

its actually 81.00 if i order it with the stud???

DrVic723 · 07-16-2007, 05:07 PM

Yes, the stud is extra, so is plating... look at the price again in the first post.. Thanks -Jeff

1979bronco · 08-09-2008, 12:01 PM

16 3.0 with no stud welded on
2 bat wings for 3.o
4 rockwell link towers 3.0 8" seperation
all brackets with 3/4 holes

shipped 74063 thanks

DrVic723 · 08-09-2008, 12:56 PM

$882.89, but for today only we're running a 20% sale on phone orders for in-house product and we'll let it go for $711.20

Let me know, I'll be here until around 4:00, everything can ship Monday.

Jeff

06-11-2007, 05:17 PM	#1 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	NEW BALLISTIC joints - 3.0" Housings with 3/4" Bore! The Massive 3.0" rebuildable BALLISTIC joint exclusively from Ballistic Fabrication is built to withstand extreme punishment. It's extra large 3/4" bore (bolt hole) is large enough to handle heavy torque, while the huge 3.0" diameter .210" wall housing accomodates over 25 degrees of misalignment both ways. The BALLISTIC joint features solid billet Nylatron GS races that won't deform under load. Designed to be paired with our X-16 Chromoly 1.25" joints. Fully greasable and rebuildable, available with a TIG welded extra-long 1020 CRS stud. The Ballistic Joint next to a 1.25" rod end $39.99! (welded stud and plating extra) Purchase HERE!

06-12-2007, 01:22 PM	#2 (permalink)
Islandzuki Registered User Join Date: Dec 2002 Member # 15343 Location: PARADISE GUAM, USA 13N/144E Posts: 2,616	dayum those are sweet....great price too!!!!` __________________ DIRT, MUD, ROCKS WHATEVER!!!!

06-12-2007, 08:45 PM	#3 (permalink)
bggrnchvy Rock God Join Date: Jan 2005 Member # 41764 Location: Bay Area, CA Posts: 2,033	Very neat product, Ive been waiting for somebody to step up and offer a joint with more wearable surface area and larger through bolts for the fullsize guys. Tried to order 3 but the site keeps saying I didn't slect enough options even though I specified shank, thread hand and finish. Ill give you guys a call tomorrow. __________________ Tow Rig: 2006 Dodge 2500 610CTD/G56/NP271/AAM9.25/AAM11.5 Trail Rig: 1997 K1500 LQ9/4l80e/NP241/D60/14FF and some stuff in between No one is ever gone if they are always remembered. JasonPayneMemorial

06-13-2007, 12:10 AM	#6 (permalink)
bggrnchvy Rock God Join Date: Jan 2005 Member # 41764 Location: Bay Area, CA Posts: 2,033	I really appreciate the quickness of your response. You fixed that hurdle but Ive run into a another, Ill PM you. __________________ Tow Rig: 2006 Dodge 2500 610CTD/G56/NP271/AAM9.25/AAM11.5 Trail Rig: 1997 K1500 LQ9/4l80e/NP241/D60/14FF and some stuff in between No one is ever gone if they are always remembered. JasonPayneMemorial

07-15-2007, 11:16 AM	#22 (permalink)
joe88xj Registered User Join Date: Apr 2005 Member # 45572 Posts: 25	its actually 81.00 if i order it with the stud??? Last edited by joe88xj; 07-15-2007 at 12:39 PM.

06-12-2007, 09:08 PM	#5 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	Okay, I think I fixed it.. give it a try now.

06-13-2007, 06:57 AM	#7 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	It was not charging for the welded stud, but I think I have that fixed as well. Thanks for everyone's patience, looks like these may ship sooner than expected!

06-19-2007, 06:39 AM	#8 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	Thanks for the orders!

06-25-2007, 06:55 AM	#9 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	Any of those that ordered these have any install pics yet? I know we sent a whole bunch out at the end of last week so post em' up when you get them installed! Give us your first impressions! Thanks everyone for helping us move these so quickly

07-03-2007, 06:52 PM	#10 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	intro sale pricing won't last long! We have hundreds in stock and ready to ship but they are going fast! Thanks for all of the support Jeff

07-09-2007, 01:06 PM	#11 (permalink)
68crawler Granite Guru Join Date: Nov 2004 Member # 38845 Location: Clovis, CA Posts: 837	I just recently bought all of the parts to build a rear 4-link set up from you (brackets, joints, tube insterts, jam nuts, etc....) Do these larger joints fit in all of your brackets? If so, I'd like to upgrade to these larger joints.

07-09-2007, 11:35 PM	#12 (permalink)
CORam Registered User Join Date: Mar 2006 Member # 70127 Location: Wyoming Posts: 199	How wide is the joint? How about the 2.63" joint? Sorry if this sounds stupid, but does the 3" measurement refer to the diameter of the joint, or the width?

07-10-2007, 08:16 AM	#13 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	3" x 3" , we offer most of our brackets in 3", but they are not all on the website. I'll look at your order and upgrage you. Thanks -Jeff

07-10-2007, 08:51 AM	#14 (permalink)
usmc_birthday Registered User Join Date: Jul 2006 Member # 75273 Location: Arkansas City, KS Posts: 371	Can you make the studs in 1 1/8-7? My links are all ready taped for that size. Brian

07-10-2007, 10:03 AM	#15 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	Yes, I'll be running the studs in about two weeks, there will be a small custom programing fee as well that you will need to consider. Thanks -Jeff

07-11-2007, 09:22 PM	#17 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	1.5" wide at the base, you tell us what they need to be coped to. They will be regular price + $70.00 setup charge. Thanks -Jeff

07-12-2007, 06:28 PM	#18 (permalink)
hineyman Livin' the dream Join Date: Aug 2006 Member # 77297 Location: Magalia, Ca. Posts: 426	How does the 25* of mis-alignment compare to your regular high mis-alignment spacers or should I say inserts?

07-12-2007, 07:49 PM	#19 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	Our regular 1" - 3/4" misalignment spacers give just over 28 degrees. Thanks -Jeff

07-13-2007, 10:08 AM	#20 (permalink)
hineyman Livin' the dream Join Date: Aug 2006 Member # 77297 Location: Magalia, Ca. Posts: 426	Would these be a better setup for steering linkage over the heims and mis-alignment spacers I was about to buy from you?

07-13-2007, 03:17 PM	#21 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	No, stick with the heims or tierod ends..

07-16-2007, 05:07 PM	#23 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	Yes, the stud is extra, so is plating... look at the price again in the first post.. Thanks -Jeff

08-09-2008, 12:01 PM	#24 (permalink)
1979bronco Registered User Join Date: Aug 2007 Member # 97111 Posts: 88	16 3.0 with no stud welded on 2 bat wings for 3.o 4 rockwell link towers 3.0 8" seperation all brackets with 3/4 holes shipped 74063 thanks

08-09-2008, 12:56 PM	#25 (permalink)
DrVic723 Banned Join Date: Apr 2005 Member # 46226 Location: Tucson Az. Posts: 2,837	$882.89, but for today only we're running a 20% sale on phone orders for in-house product and we'll let it go for $711.20 Let me know, I'll be here until around 4:00, everything can ship Monday. Jeff

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode