Rockwell double triangulated solution... - Pirate4x4.Com : 4x4 and Off-Road Forum
 
Pirate4x4.Com : 4x4 and Off-Road Forum  

Go Back   Pirate4x4.Com : 4x4 and Off-Road Forum > Vendor's Marketplace > Suspension
Notices

Reply
 
Share Thread Tools Display Modes
Old 05-04-2010, 09:13 AM   #1 (permalink)
Registered User
 
rockcity's Avatar
 
Join Date: Jan 2006
Member # 64837
Location: NC
Posts: 1,323
Blog Entries: 3
Send a message via AIM to rockcity Send a message via Skype™ to rockcity
Rockwell double triangulated solution...

THE solution to adding a double triangulated link setup to your Rockwell axle...


The Mudpro Top Hat design is for mounting links above the differential. This design allows for double triangulation of your 4-link Rockwell axle. The design does NOT use the 3/8" inspection cover bolts of other designs. Instead, it incorporates 12 of the 1/2" bolts on the bearing flanges. Underside gusseting adds further strength and rigidity. Sold as a weld together kit with top plate of 5/16" steel and 3/8" steel side plates. Generous flat area of 11 3/8" x 12" for mounting tabs to the front steering axle. Front and rear designs integrate the Wilwood caliper and Mazda rotor pinion brake. Mazda rotor bore must be machined larger and the bolt pattern redrilled to fit the Rockwell flange. Machined rotor available. Link tabs NOT included.


Front setup:







For anyone needing the rockwell Top Hat design for their rear steer setup, that is available too...

The rear is also sold as a weld together kit with top plate of 5/16" steel and 3/8" steel side plates. Generous flat area of 11 3/8" by 14 7/8" for the rear steering axle. Designed to fit a rear steer axle with passenger long side/passenger pinion configuration. Pay careful attention to the pictures to ensure that your rear steer axle is oriented correctly before ordering. Front and rear designs integrate the Wilwood caliper and Mazda rotor pinion brake. Mazda rotor bore must be machined larger and redrilled to fit the Rockwell pinion flange. Machined rotor available. Link tabs NOT included.








Your choice, $250 plus shipping
__________________
[CENTER][COLOR="Red"][SIZE="5"]East Coast Offroad Racing Series[/SIZE][/COLOR]
[B][SIZE="4"][CENTER][url]www.ECORS.com[/url][/CENTER][/SIZE][/B][/CENTER]

[SIZE="3"][B][COLOR="RoyalBlue"]Visit ECORS on Facebook![/COLOR][/B][/SIZE]


[B][SIZE="3"]
Chris Brower (snappy1978), Authorized [COLOR="Red"]SNAP ON [/COLOR]Dealer
Mud Pro Metalworks [url]www.mudprometalworks.com[/url]
[B][SIZE="3"][COLOR="Red"]Big Horn Graphics[/COLOR][/SIZE][/B] [url]www.bighorn-graphics.com[/url]
[COLOR="Lime"]Oliver's Custom Driveshaft [url] www.oliverscustomdriveshaft.com[/url][/COLOR][/SIZE][/B]
[SIZE="3"][B]Albemarle Screenprinting and Embroidery, Hertferd NC[/B][/SIZE]
[B][SIZE="3"][COLOR="Blue"]Blue Torch Fab [url]www.bluetorchfab.com[/url][/COLOR][/SIZE][/B]
rockcity is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 08:46 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 ©2011, Crawlability, Inc.