suzuki to toyota drive shaft - Pirate4x4.Com : 4x4 and Off-Road Forum

SOS · 09-09-2001, 07:53 PM

after sitting and pondering this I could not fing out how to make this work cheeply. The reason I need to make this cheep is because I will be putting a toyota dual transfercase setup there for the drive shaft that I make to connect the zuk T-case to the toy axles will be useless to me. If any one has any Ideas or has delt with the problem and information will be greatly aprechated
keith

scwafish · 09-09-2001, 09:44 PM

I'm pretty sure late model (post 88.5) have the same pattern as some toys, you just need to find those pinion flanges.

SOS · 09-10-2001, 03:56 AM

I have those flanges. I think I'm finding out I need a certain year toyota double cardian shft to make it work. just not sure which one.
Keith

scwafish · 09-10-2001, 07:26 AM

Forgot to tell you you will need to enlarge the hole in the flange for the shoulder on the d-shaft.

zuk88 · 09-10-2001, 09:04 AM

Here is some info about installing a toy shaft in a zuk. It tells you what you need to do to the flanges and stuff.I run custom adaptors on my toy shaft. http://www.izook.com/tech/toyotadriv...stallation.htm

0ILBURNER · 09-10-2001, 02:31 PM

Use 88.5 or newer Zuk flange with pilot enlarged just a tad + ~1985 or newer Toy shaft (the one with 14mm bolt heads)

Lziffle73 · 09-10-2001, 10:48 PM

hey zuk88, did you make your own spacers or did someone make them for you? I was wanting to do the same thing just so I can move it around my property until I get it to the point were it is done and I will order new driveshafts. If you made them yourself can you let me know what you did to save myself some time.

Thanks,
Wes.

zuk88 · 09-11-2001, 08:55 AM

I had them made at a driveline shop.

09-09-2001, 07:53 PM	#1 (permalink)
SOS Registered User Join Date: Aug 2001 Member # 6355 Location: Medford NJ Posts: 122	suzuki to toyota drive shaft after sitting and pondering this I could not fing out how to make this work cheeply. The reason I need to make this cheep is because I will be putting a toyota dual transfercase setup there for the drive shaft that I make to connect the zuk T-case to the toy axles will be useless to me. If any one has any Ideas or has delt with the problem and information will be greatly aprechated keith

09-09-2001, 09:44 PM	#2 (permalink)
scwafish Registered User Join Date: May 2000 Member # 977 Location: Ukiah CA Posts: 3,170	I'm pretty sure late model (post 88.5) have the same pattern as some toys, you just need to find those pinion flanges. __________________ eXtreme web-wheeler!

09-10-2001, 07:26 AM	#4 (permalink)
scwafish Registered User Join Date: May 2000 Member # 977 Location: Ukiah CA Posts: 3,170	Forgot to tell you you will need to enlarge the hole in the flange for the shoulder on the d-shaft. __________________ eXtreme web-wheeler!

09-10-2001, 09:04 AM	#5 (permalink)
zuk88 Registered User Join Date: Mar 2001 Member # 3785 Location: Windsor, CA Posts: 838	Here is some info about installing a toy shaft in a zuk. It tells you what you need to do to the flanges and stuff.I run custom adaptors on my toy shaft. http://www.izook.com/tech/toyotadriv...stallation.htm __________________ [B]'88 ZUK[/B] Toy axles,4.30 r&p, spool rear, EZ front,4.16 t-case, 2" YJs, Sky Mfg hy-steer, 33" thorns, and fuzzy seat covers.

09-10-2001, 02:31 PM	#6 (permalink)
0ILBURNER Registered User Join Date: Jul 2001 Member # 5829 Location: Memfrica Posts: 1,851	Use 88.5 or newer Zuk flange with pilot enlarged just a tad + ~1985 or newer Toy shaft (the one with 14mm bolt heads) __________________ DO NOT FEED THE HUMANS They will not learn to take care of themselves.

09-10-2001, 03:56 AM	#3 (permalink)
SOS Registered User Join Date: Aug 2001 Member # 6355 Location: Medford NJ Posts: 122	I have those flanges. I think I'm finding out I need a certain year toyota double cardian shft to make it work. just not sure which one. Keith

09-10-2001, 10:48 PM	#7 (permalink)
Lziffle73 Registered User Join Date: Sep 2001 Member # 6950 Location: Colorado Springs, CO Posts: 80	hey zuk88, did you make your own spacers or did someone make them for you? I was wanting to do the same thing just so I can move it around my property until I get it to the point were it is done and I will order new driveshafts. If you made them yourself can you let me know what you did to save myself some time. Thanks, Wes.

09-11-2001, 08:55 AM	#8 (permalink)
zuk88 Registered User Join Date: Mar 2001 Member # 3785 Location: Windsor, CA Posts: 838	I had them made at a driveline shop. __________________ [B]'88 ZUK[/B] Toy axles,4.30 r&p, spool rear, EZ front,4.16 t-case, 2" YJs, Sky Mfg hy-steer, 33" thorns, and fuzzy seat covers.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode