Sammi fan CFM - Pirate4x4.Com : 4x4 and Off-Road Forum

zachatola · 09-21-2007, 02:22 PM

Anyone out there know what a standard zuk fan pulls for CFM? I would like to replace the manual with an elec but i would like to get one with the same or more CFM. Looked through the FAQ and some other places but not getting much info on the subject.

Strange · 09-21-2007, 09:55 PM

i would not rely on that fan to do your engine cooling, its just to help out when the ac is on. get a good aftermarket one, or a taurus one from the junkyard

zachatola · 09-22-2007, 09:00 PM

What kinda CFM would you think would be good for cooling a zuk, i would like to buy with the intent to put a 1.6 in at a later date.

martyfowler · 09-24-2007, 06:05 PM

something to keep in mind if you're planning on a 1.6. i have had an 8 valve and a 16 valve in mine, and the 16 valve tends to run much cooler.

zukibrothers · 09-25-2007, 06:14 AM

Quote:

Originally Posted by zachatola

What kinda CFM would you think would be good for cooling a zuk, i would like to buy with the intent to put a 1.6 in at a later date.

i used a cheap autozone fan for years on my 1.3/1.6's don't remember the cfm's, but it didn't take much air movement to cool the motors. what made the biggest difference for me was the radiator(i used the 1.6 radiator for mine). of course if you could get the tauris fan to fit, that would pull more than enough air. i am using it to cool my 4.0v6 samurai.

09-21-2007, 02:22 PM	#1 (permalink)
zachatola Registered User Join Date: May 2004 Member # 30354 Location: Puyallup, WA Posts: 164	Sammi fan CFM Anyone out there know what a standard zuk fan pulls for CFM? I would like to replace the manual with an elec but i would like to get one with the same or more CFM. Looked through the FAQ and some other places but not getting much info on the subject.

09-24-2007, 06:05 PM	#4 (permalink)
martyfowler Registered User Join Date: May 2004 Member # 30622 Location: goobertown,AR(no joke) Posts: 149	something to keep in mind if you're planning on a 1.6. i have had an 8 valve and a 16 valve in mine, and the 16 valve tends to run much cooler. __________________ '86 Zuk, 1.6 16V, 5.14 t'case, Toy axles, 30 spl longs, 4.88's, ARB's, 4 link f&r, 14" Fox air shox, 101" wb, 15/39.5 TSL's, lots of tube

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-21-2007, 09:55 PM	#2 (permalink)
Strange Registered User Join Date: Dec 2005 Member # 63309 Location: Dallas-Austin, tx Posts: 294	i would not rely on that fan to do your engine cooling, its just to help out when the ac is on. get a good aftermarket one, or a taurus one from the junkyard

09-22-2007, 09:00 PM	#3 (permalink)
zachatola Registered User Join Date: May 2004 Member # 30354 Location: Puyallup, WA Posts: 164	What kinda CFM would you think would be good for cooling a zuk, i would like to buy with the intent to put a 1.6 in at a later date.