plasma/ milwaukee tooks/ welding stuff - Pirate4x4.Com : 4x4 and Off-Road Forum

jeep4cyl · 10-07-2008, 04:06 PM

I have a 6 month old hypotherm power pack 30. This machine works awsome used it on a daily basis and never had any issues. Cuts 3/8"s but will sever 1/2" can plug into 110 or 220v.
Price is $700 obo.

http://www.hypertherm.com/en/Product...powermax30.jsp

Next is a set of Milwaukee 18v lithium ion power tools. These are probably less then 3 months old. i have two sets of them and really dont need that many

Case comes with sawzall, impact driver, drill/hammer drill, and flashlight along with 2 batteries and charger
Price $400 obo

http://www.milwaukeetool.com/webapp/...0028&langId=-1

Im also looking for a dana 300, 4.1 gears for a dana 300 a chevy kingpin 60

tmorgan4 · 10-07-2008, 06:38 PM

Sent a PM on the Miller Elite.

jeep4cyl · 10-07-2008, 06:56 PM

replied, thanks

jeep4cyl · 10-11-2008, 08:03 PM

welding helmet sold

jeep4cyl · 10-13-2008, 04:30 PM

top

jeep4cyl · 10-15-2008, 03:12 PM

offer me something

ElLizard · 10-15-2008, 03:42 PM

Does it come with the dual cord attachments, like this one...
http://store.weldersource.com/088003.html

jeep4cyl · 10-16-2008, 06:47 PM

yes it does

91YEEPER · 10-16-2008, 08:09 PM

interested in trading for a front chevy D60 (from a CUCV) you take care of shipping cost for the axle and ill pay you for shipping the plasma.

jpmassey · 10-16-2008, 10:23 PM

Quote:

Originally Posted by jeep4cyl

Next is a set of Milwaukee 18v lithium ion power tools. These are probably less then 3 months old. i have two sets of them and really dont need that many

Case comes with sawzall, impact driver, drill/hammer drill, and flashlight along with 2 batteries and charger
Price $400 obo

Dude, I bought that EXACT set at home depot for 299 last week.

jeep4cyl · 10-17-2008, 04:47 PM

well good for you. now gtfo of my thread unless you have something truthfull to say. Do the research on it and try and get this kit for $299.
Here i will help you.

This one doesnt come with a case.
http://www.toolup.com/milwaukee/0920-24.html

this one is from Graingers
http://www.grainger.com/Grainger/items/1ELD8

http://www.mytoolstore.com/milwauke/...l#combo-4piece

http://nphpowertools.com/index.asp?P...D&ProdID=17644

http://www.toolking.com/Milwaukee_0920-24.aspx

http://www.tylertool.com/milwaukee62.html

I can go on and on. Im not trying to be a dick or rip people off. this is just what i can see that this kit goes for. I went with a guy from my work last sunday to home depot and we pay $479 for this kit. i will photocopy the recipt if you want.

jeepslut65 · 10-22-2008, 07:36 PM

Do you still have the plasma cutter? if so, would you be willing to take 600 for it? if so, I'll take it.

xjtony · 11-01-2008, 02:49 PM

do you still have the plasma cutter???

gte718p · 11-02-2008, 05:24 AM

You forgot the most important link. Home Depot 399 though its going to cost a good bit more with tax.

http://www.homedepot.com/webapp/wcs/...01+502106+1291

jeep4cyl · 11-03-2008, 03:45 PM

yup forgot homo depot, still not $299

jeep4cyl · 11-03-2008, 03:45 PM

plasma is gone, tools are all thats left. make an offer

joshgreen454 · 11-14-2008, 11:50 AM

ryan -

can you please ship me the 220v plug for the plasma?

thanks.
josh

10-07-2008, 04:06 PM	#1 (permalink)
jeep4cyl Registered User Join Date: Sep 2006 Member # 79431 Location: West Side, Mass Posts: 106	plasma/ milwaukee tooks/ welding stuff I have a 6 month old hypotherm power pack 30. This machine works awsome used it on a daily basis and never had any issues. Cuts 3/8"s but will sever 1/2" can plug into 110 or 220v. Price is $700 obo. http://www.hypertherm.com/en/Product...powermax30.jsp Next is a set of Milwaukee 18v lithium ion power tools. These are probably less then 3 months old. i have two sets of them and really dont need that many Case comes with sawzall, impact driver, drill/hammer drill, and flashlight along with 2 batteries and charger Price $400 obo http://www.milwaukeetool.com/webapp/...0028&langId=-1 Im also looking for a dana 300, 4.1 gears for a dana 300 a chevy kingpin 60 Last edited by jeep4cyl; 10-11-2008 at 08:03 PM.

10-15-2008, 03:42 PM	#7 (permalink)
ElLizard Registered User Join Date: Jun 2007 Member # 93719 Location: Southern New Mexico Posts: 398	Does it come with the dual cord attachments, like this one... http://store.weldersource.com/088003.html __________________ ╭∩╮(︶︿︶)╭∩╮

10-22-2008, 07:36 PM	#12 (permalink)
jeepslut65 Registered User Join Date: Apr 2008 Member # 112447 Location: San Diego, Ca Posts: 17	plasma cutter Do you still have the plasma cutter? if so, would you be willing to take 600 for it? if so, I'll take it.

11-01-2008, 02:49 PM	#13 (permalink)
xjtony Rock God Join Date: Jul 2005 Member # 50866 Location: Hernando, MS Posts: 1,796	do you still have the plasma cutter??? __________________ I currently have no rig.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-07-2008, 06:38 PM	#2 (permalink)
tmorgan4 Registered User Join Date: Jun 2006 Member # 74576 Location: Fort Collins, CO Posts: 1,442	Sent a PM on the Miller Elite.

10-07-2008, 06:56 PM	#3 (permalink)
jeep4cyl Registered User Join Date: Sep 2006 Member # 79431 Location: West Side, Mass Posts: 106	replied, thanks

10-11-2008, 08:03 PM	#4 (permalink)
jeep4cyl Registered User Join Date: Sep 2006 Member # 79431 Location: West Side, Mass Posts: 106	welding helmet sold

10-13-2008, 04:30 PM	#5 (permalink)
jeep4cyl Registered User Join Date: Sep 2006 Member # 79431 Location: West Side, Mass Posts: 106	top

10-15-2008, 03:12 PM	#6 (permalink)
jeep4cyl Registered User Join Date: Sep 2006 Member # 79431 Location: West Side, Mass Posts: 106	offer me something

10-16-2008, 06:47 PM	#8 (permalink)
jeep4cyl Registered User Join Date: Sep 2006 Member # 79431 Location: West Side, Mass Posts: 106	yes it does

10-16-2008, 08:09 PM	#9 (permalink)
91YEEPER Registered User Join Date: Jan 2006 Member # 65365 Location: Momence, IL Posts: 790	interested in trading for a front chevy D60 (from a CUCV) you take care of shipping cost for the axle and ill pay you for shipping the plasma.

10-17-2008, 04:47 PM	#11 (permalink)
jeep4cyl Registered User Join Date: Sep 2006 Member # 79431 Location: West Side, Mass Posts: 106	well good for you. now gtfo of my thread unless you have something truthfull to say. Do the research on it and try and get this kit for $299. Here i will help you. This one doesnt come with a case. http://www.toolup.com/milwaukee/0920-24.html this one is from Graingers http://www.grainger.com/Grainger/items/1ELD8 http://www.mytoolstore.com/milwauke/...l#combo-4piece http://nphpowertools.com/index.asp?P...D&ProdID=17644 http://www.toolking.com/Milwaukee_0920-24.aspx http://www.tylertool.com/milwaukee62.html I can go on and on. Im not trying to be a dick or rip people off. this is just what i can see that this kit goes for. I went with a guy from my work last sunday to home depot and we pay $479 for this kit. i will photocopy the recipt if you want.

11-02-2008, 05:24 AM	#14 (permalink)
gte718p Banned Join Date: May 2008 Member # 114553 Posts: 237	You forgot the most important link. Home Depot 399 though its going to cost a good bit more with tax. http://www.homedepot.com/webapp/wcs/...01+502106+1291

11-03-2008, 03:45 PM	#15 (permalink)
jeep4cyl Registered User Join Date: Sep 2006 Member # 79431 Location: West Side, Mass Posts: 106	yup forgot homo depot, still not $299

11-03-2008, 03:45 PM	#16 (permalink)
jeep4cyl Registered User Join Date: Sep 2006 Member # 79431 Location: West Side, Mass Posts: 106	plasma is gone, tools are all thats left. make an offer

11-14-2008, 11:50 AM	#17 (permalink)
joshgreen454 Registered User Join Date: Feb 2003 Member # 17191 Location: philly, pa & norwich, ct Posts: 225	ryan - can you please ship me the 220v plug for the plasma? thanks. josh