For Sale: Miller Plasma Cutter And Tig Welder

[sabrewolf]

:::BOTH SOLD::: Thanks !!


Hey all,

I know this is my first post and all,
But i was referred by a friend that has
a Jeep 4x4.

i wanted to give you guys/gals a first chance
at these 2 tools i have here, as i havent used them
in a couple of months...

PLASMA CUTTER SOLD!!
Miller 375 Extreme Invertor-Based Plasma Cutter
good for 3/8in steel or stainless rated cut and
a 5/8in sever cut. Aluminum cut depth is 1/4in.
It comes with the Gun, Ground Clamp, Extra
consumables and drag tip cup with electode tips.
Also, 3 different plugs for 110/15a, 110/20a, 220/30a.
It comes in a nice rugged plastic carry case.
I have "Only" used it for 15-20mins, Really!
This thing is pretty mint.
And i am asking 800.00 For it.. Shipping would be
extra.. But i can drive about 100 miles to meet you
if necessary.. I live in Ambler, P.A. 19002
here is the direct link to miller's site to the cutter:

http://www.millerwelds.com/products/...m_375_x-treme/
Everything you see in the picture is what i have, plus
the extra consumables, and Dragtip.

As for the Tig Welder,
Miller Maxstar 150 STL
It is an Invertot-Based model with a 150amp
welding output running on a 110v/20a plug.
I have used it about 3 hours for various projects
on my car.. It comes with the Foot Pedal, and the
hand control that is nicely zip-tied to the gun
feeder hose. It comes with the stock cups and
tungsten rod sleeves. I have included extra
tungsten 1/16 electrodes too. Also comes with
Stainless consumable rods, and the stick-welding
claw too. Right now its setup for 110v/20 outlets,
but can easily be changed to a 220v outlet by just
cutting off the plug end and wiring a 220v single
phase plug to it. It has Auto-Voltage selection
for an easy upgrade to different plugs.
The gas regulator is included.. I can give you
a 1/4 full bottle of argon (80lb) for free if you
can meet me or come to the house to get it.
I live in the 19002 area code.
Ohh, it also comes in a nice rigid plastic
carry-case sorta like the plasma cutter
But i can't ship that anywhere...
Linky to the welder:

http://www.millerwelds.com/products/...xstar_150_stl/
I am asking $1150.00

Both were purchased between July-August last year.
The original warranty should still be intact on both
of these units.

If you are interested, please email me:
robertkmagill@hotmail.com

Thanks All,

Robert M.

[dopeassjackson]

i dont know about the 375 Xtreme version but with my normal 375 i cut all my IFS off and made most of the brackets and various other things all on the original comsumables. they last 10X longer than the lincoln pro cut consumables. the 375 xtreme is super light weight and small, its about halve the size of a 110V welder.

[sabrewolf]

Bumpity Bump!

[sabrewolf]

to duh top!