Thermal Arc 185 TIG/Stick Welder - Pirate4x4.Com : 4x4 and Off-Road Forum

96Mustang460cid · 01-09-2011, 07:21 PM

You will get everything I have for it except the Argon bottle. I have several lbs of rod (aluminum (4043) and low carbon steel), a good selection of tungsten (Red, Green, and Grey) in different diameters, and a Harbor Freight grinder I've only used for the tungsten. It comes with a foot pedal.

Feel free to call me to discuss: 918-760-8450

This welder is a quality piece and NOT a cheap Chinese machine. I've owned it less than three years and will give you my purchase receipts, ect that came with it. If you live close by, you're welcome to come out and take the welder for a test drive .

A couple photos I took:

$1,900 + shipping

Have a good day!
Michael

Brad · 01-10-2011, 06:30 PM

He is right, these aren't some chinese knockoff. This is a GREAT machine! I have used one at it is right up there with the Miller's I use at work.

Window Licker · 01-11-2011, 11:10 PM

I have the same Machine and it works awesome!!! Good luck with the sale.

ksilovich · 02-15-2011, 02:23 PM

bump for a good deal

96Mustang460cid · 02-21-2011, 03:40 PM

Thanks for the positive comments, guys!

I'm moving in a few weeks and would like to sale this before I move. If you live close enough to pick it up, I'll include my DIY welder cart I fabbed to hold this welder, a 110v wire feed welder, and the bottles for both welders.

Just to be clear: the 110v welder and bottles are not included in this sale

. The welding cart is built to hold all of that stuff, though.

Have a good day!
Michael

96Mustang460cid · 03-14-2011, 08:03 PM

TTT

Have a good day!
Michael

groundscore · 04-06-2011, 06:09 PM

still for sale?

96Mustang460cid · 04-06-2011, 07:32 PM

Quote:

Originally Posted by groundscore

still for sale?

Yes, it's still available.

Have a good day!
Michael

01-09-2011, 07:21 PM	#1 (permalink)
96Mustang460cid Registered User Join Date: Apr 2005 Member # 46279 Location: Tulsa, OK Posts: 20	Thermal Arc 185 TIG/Stick Welder You will get everything I have for it except the Argon bottle. I have several lbs of rod (aluminum (4043) and low carbon steel), a good selection of tungsten (Red, Green, and Grey) in different diameters, and a Harbor Freight grinder I've only used for the tungsten. It comes with a foot pedal. Feel free to call me to discuss: 918-760-8450 This welder is a quality piece and NOT a cheap Chinese machine. I've owned it less than three years and will give you my purchase receipts, ect that came with it. If you live close by, you're welcome to come out and take the welder for a test drive . A couple photos I took: $1,900 + shipping Have a good day! Michael __________________ 96 Mustang 460 cid w/ a best et of 11.31 @ 121 mph http://www.cardomain.com/id/96mustang460cid

01-10-2011, 06:30 PM	#2 (permalink)
Brad Registered User Join Date: Feb 2001 Member # 3239 Location: Benicia,CA Posts: 7,445	He is right, these aren't some chinese knockoff. This is a GREAT machine! I have used one at it is right up there with the Miller's I use at work. __________________ B-RAD Fabrication TDO DYSFUNCTIONAL ROCKCRAWLERS

02-21-2011, 03:40 PM	#5 (permalink)
96Mustang460cid Registered User Join Date: Apr 2005 Member # 46279 Location: Tulsa, OK Posts: 20	Thanks for the positive comments, guys! I'm moving in a few weeks and would like to sale this before I move. If you live close enough to pick it up, I'll include my DIY welder cart I fabbed to hold this welder, a 110v wire feed welder, and the bottles for both welders. Just to be clear: the 110v welder and bottles are not included in this sale . The welding cart is built to hold all of that stuff, though. Have a good day! Michael __________________ 96 Mustang 460 cid w/ a best et of 11.31 @ 121 mph http://www.cardomain.com/id/96mustang460cid

03-14-2011, 08:03 PM	#6 (permalink)
96Mustang460cid Registered User Join Date: Apr 2005 Member # 46279 Location: Tulsa, OK Posts: 20	TTT Have a good day! Michael __________________ 96 Mustang 460 cid w/ a best et of 11.31 @ 121 mph http://www.cardomain.com/id/96mustang460cid

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-11-2011, 11:10 PM	#3 (permalink)
Window Licker Wheeler Join Date: Mar 2009 Member # 132041 Location: Laverne, Ca Posts: 314	I have the same Machine and it works awesome!!! Good luck with the sale.

02-15-2011, 02:23 PM	#4 (permalink)
ksilovich Registered User Join Date: Jun 2010 Member # 162446 Posts: 39	bump for a good deal

04-06-2011, 06:09 PM	#7 (permalink)
groundscore Registered User Join Date: Apr 2011 Member # 187581 Posts: 6	still for sale?