2 x 2 table questions - Pirate4x4.Com : 4x4 and Off-Road Forum

tnjeep · 01-27-2010, 04:28 PM

I have a hypertherm powermax 600 plasma cutter, Do you know if it would work well with 2 x2 system cutting 1/4" thick mild steel.

HardcorewannabeXJ · 01-27-2010, 07:45 PM

We have several customers running their 600 on our larger machines with great success, I don't think there would be any issues running it on a 2x2. 1/4" should be doable.

Rainen · 01-29-2010, 08:37 AM

I am running a 600 on my 2x2 with a machine torch, I have done up to 3/16" so far with no realy issues. I am sure it would be fine for 1/4"

Torchmate · 01-29-2010, 10:46 AM

We have always sold the Powermax 600 as a .25" cut capacity in the machine firing straight down. More with an edge start.

01-27-2010, 04:28 PM	#1 (permalink)
tnjeep Registered User Join Date: Dec 2003 Member # 25392 Location: TN Posts: 501	2 x 2 table questions I have a hypertherm powermax 600 plasma cutter, Do you know if it would work well with 2 x2 system cutting 1/4" thick mild steel. __________________ 2003 Rubicon 104" wheelbase

01-29-2010, 08:37 AM	#3 (permalink)
Rainen Get Out Join Date: Sep 2006 Member # 79608 Location: Carbondale, CO Posts: 178	I am running a 600 on my 2x2 with a machine torch, I have done up to 3/16" so far with no realy issues. I am sure it would be fine for 1/4" __________________ My shit always works...sometimes.

01-29-2010, 10:46 AM	#4 (permalink)
Torchmate Rock God Join Date: Aug 2007 Member # 98865 Location: Reno, NV Posts: 2,258	We have always sold the Powermax 600 as a .25" cut capacity in the machine firing straight down. More with an edge start. __________________ WWW.TORCHMATE.COM We are hiring! Email your resume to our Human Resources Manager at cnichols@torchmate.com and ask about openings. Buy your consumables here! www.torchmatestore.com Torchmate Racing Homepage: www.torchmateracing.com Torchmate CNC Forum here: /forum/125-torchmate-cnc-forum/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-27-2010, 07:45 PM	#2 (permalink)
HardcorewannabeXJ Registered User Join Date: Jan 2007 Member # 84593 Location: Reno, NV Posts: 3,004	We have several customers running their 600 on our larger machines with great success, I don't think there would be any issues running it on a 2x2. 1/4" should be doable.