I need a link to the driver software - Pirate4x4.Com : 4x4 and Off-Road Forum

jasonc · 05-01-2010, 10:47 AM

I got my 2x2 in and working on setting it up. I need a good link for the driver software if any Torchmate folks are on here. The link the tech guy sent me is not working. The machine looks great I am eager to get it going.

Torchmate · 05-01-2010, 09:22 PM

It should be on the cd that came with the machine. I wish I could give you a link, but they change it from time to time.

jasonc · 05-01-2010, 10:37 PM

Yea I did not get a cd with the machine. I called and was emailed some links for the software. But the only one I could download and run was the Torchmate 3. I think I still need the driver for the interface box.

HardcorewannabeXJ · 05-03-2010, 09:02 AM

Quote:

Originally Posted by jasonc

Yea I did not get a cd with the machine. I called and was emailed some links for the software. But the only one I could download and run was the Torchmate 3. I think I still need the driver for the interface box.

There is only one box that hooks up to the computer to run the machine, and the Torchmate 3 software contains the driver for it. If you need some assistance on installing that driver, give us a call, it's easier to walk you through it on the phone.

05-01-2010, 10:47 AM	#1 (permalink)
jasonc Registered User Join Date: Jan 2006 Member # 64920 Posts: 27	I need a link to the driver software I got my 2x2 in and working on setting it up. I need a good link for the driver software if any Torchmate folks are on here. The link the tech guy sent me is not working. The machine looks great I am eager to get it going.

05-01-2010, 09:22 PM	#2 (permalink)
Torchmate Rock God Join Date: Aug 2007 Member # 98865 Location: Reno, NV Posts: 2,258	It should be on the cd that came with the machine. I wish I could give you a link, but they change it from time to time. __________________ WWW.TORCHMATE.COM We are hiring! Email your resume to our Human Resources Manager at cnichols@torchmate.com and ask about openings. Buy your consumables here! www.torchmatestore.com Torchmate Racing Homepage: www.torchmateracing.com Torchmate CNC Forum here: /forum/125-torchmate-cnc-forum/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-01-2010, 10:37 PM	#3 (permalink)
jasonc Registered User Join Date: Jan 2006 Member # 64920 Posts: 27	Yea I did not get a cd with the machine. I called and was emailed some links for the software. But the only one I could download and run was the Torchmate 3. I think I still need the driver for the interface box.