TM3 training module? - Pirate4x4.Com : 4x4 and Off-Road Forum

cobronco69 · 06-11-2010, 11:08 AM

Has Torchmate thought about putting together a CBT that arrives on the CD for us noobs? I would gladly pay more for in depth training that had some lessons built into it. Getting everything up and running is easy, but the little blips in the user manual about all the advanced functions dont really mean much to someone who doesnt have a background to draw from. A function by function CBT with some lessons built in would give users a well rounded background and I would imagine it would cut down on the tech support calls that are always the same bunch of questions.

Anyway, just tossing it out there, hope to meet some of the guys from Torchmate at the WERock check in and talk more about it next week!

Dnmeistr · 06-11-2010, 01:43 PM

There are a bunch of walkthroughs on the Torchmate website under the Support section of Torchmate.com on using the CAD program and driver software.

cobronco69 · 06-12-2010, 11:10 AM

I looked through all of that. I was talking way more in depth

06-11-2010, 11:08 AM	#1 (permalink)
cobronco69 Granite Guru Join Date: Oct 2001 Member # 7410 Location: Palisade CO Posts: 665	TM3 training module? Has Torchmate thought about putting together a CBT that arrives on the CD for us noobs? I would gladly pay more for in depth training that had some lessons built into it. Getting everything up and running is easy, but the little blips in the user manual about all the advanced functions dont really mean much to someone who doesnt have a background to draw from. A function by function CBT with some lessons built in would give users a well rounded background and I would imagine it would cut down on the tech support calls that are always the same bunch of questions. Anyway, just tossing it out there, hope to meet some of the guys from Torchmate at the WERock check in and talk more about it next week! __________________ Battlement Fabrication Grand Junction, CO BattlementFab facebook

06-12-2010, 11:10 AM	#3 (permalink)
cobronco69 Granite Guru Join Date: Oct 2001 Member # 7410 Location: Palisade CO Posts: 665	I looked through all of that. I was talking way more in depth __________________ Battlement Fabrication Grand Junction, CO BattlementFab facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-11-2010, 01:43 PM	#2 (permalink)
Dnmeistr Registered User Join Date: Jun 2008 Member # 115338 Posts: 418	There are a bunch of walkthroughs on the Torchmate website under the Support section of Torchmate.com on using the CAD program and driver software.