Trophy FJ Build - Pirate4x4.Com : 4x4 and Off-Road Forum
 
Pirate4x4.Com : 4x4 and Off-Road Forum  

Go Back   Pirate4x4.Com : 4x4 and Off-Road Forum > Brand Specific Tech > Toyota - FJ Cruiser
Notices

Reply
 
Share Thread Tools Display Modes
Old 06-23-2016, 09:06 PM   #1 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Trophy FJ Build

Yup I'm crazy.

it will be as it reads in the title.

...yes.....I could make my life easy and just build/buy a tacoma/tundra prerunner.....but what fun is that?

Plenty of nice pre-runners already built running around socal for sale.....that said, I'm in love with my FJ.

So fuck it.


------------

I'm Lucky that I live in SoCal in the heart of Desert Racing and offroad community. Hard gained knowledge and skills are all around.

After many years of very happy FJ ownership, on my last blast in the Mojave desert I found myself pushing 60mph naturally I came up on some unexpected terrain feature and slammed my FJ hard and realized I was having too much fun and being stupid. My truck was simply not built for that kind of speed. So I toned things down a bit and enjoyed the rest of my trip....still the as an auto road racer and ex moto-roadracer the speed bug is strong inside me. At the same time I have really enjoyed my time on black diamond trails here in CA. My last trip thru John Bull in big bear left me itching for more....

Many things have conspired in my life to allow me to indulge my FJ fetish. I have top secret "work related" plans for the FJ that will be revealed in due time. That said, it means it will all be tax deductible business expense as I will use the truck for "work". Since now that helped me rationalize the expense....I looked at my options.

So with parts being ordered as we speak......down the rabbit hole I go. Wish me luck!


We sat down for a few hours and planned everything, made some choices, pushed some numbers around...set a schedule.


The funny thing is when I bought my car back in 2010, I saw this picture online. I remained pinned to my wall in my office since then.....as a motivation picture.....and in a couple of months (with any luck) I should be the owner of a even better version of my dream FJ.



In the end we are all still kids dreaming about the cars on the posters in our room. Luckily thru LOTS of hard work in the last few years my dream will be coming true.


@TrophyFJ on instagram

HERE we go!
TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:07 PM   #2 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
1 month in....update.

They had a lot of work to do on some race trucks and bread and butter customers no major progress to report.... lots of parts got ordered, some prep work started on some of the donor parts....few design discussions and few changes as result....

Currently......the arms were designed in CAD and the front arms getting a redesign from the existing LT arm they had just finished making for another crazy FJ customer.

At the moment everything got sent to the laser cutter and we are waiting on them to deliver a bunch of pretty lasercut parts, tabs, gussets etc,etc,etc....then things will finally start coming together. Literally. Everything is designed in CAD software and exported to the laser cutter. You can even cycle the suspension in the software and that how he is working out geometry and design. Luckily since he just finished the other FJ project he had all the models and a lot of work has already been done. We are changing a few things from their previous FJ build. So what you get back from laser is steel plates with "tabs" that stick out that interlock with other plates much like a jigsaw puzzle........then you spark up the welder and make it all into one beautifully crafted part that almost makes me feel bad powder coating.

When they start welding, I'll go visit them and get some pics....

Meanwhile I'm trying to focus on work so I stop thinking about my truck.....and so I can pay the bill. Which as expected is growing a bit.


I wish I could wave a wand and have it done in a blink of an eye, some days I want to drive down there and help them!.......this is the first time I am not fabricating and building something I am driving/riding. New Experience. I never had the money to pay someone else before. If I can I would love to go down there and tig weld some of my parts.....but I should just focus on work.

Meanwhile the wait keeps me driven at work to continue to drive my company forward...Spending money on my cars, bikes has always kept me driven in life....


I could be spending it on coke and hookers.....so it could be worse.
TrophyFJ is offline   Reply With Quote Quick reply to this message
Sponsored Links
Old 06-23-2016, 09:10 PM   #3 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Back to my build....

My Lower arm parts emerge from the CAD software and brought to life via a CNC laser cutter and bender....



If they look big it's be cause they are.... will make the fiberglass fender look stock.






So cool to see it all come together....The guys at Desert Concepts really pulling out all the stops.

TrophyFJ is offline   Reply With Quote Quick reply to this message
 
Old 06-23-2016, 09:11 PM   #4 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
So the rear end....

We taking a 2014 Toyota Tundra crewmax rear end. It is much bigger than previous Tundras at 10.5". Bigger rear brakes and axle shafts too of course. Going to be one strong rear end....ready for the abuse I will be dishing out....



Take a look at the guts.... the pictures don't do it's size justice. We will be adding 4.88 gears and ARB lockers front and rear.

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:13 PM   #5 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Now my favorite part of the build so far....

Looks so badass....the guys are doing great job with the rear axle housing.

Started out with a 2014 Tundra crewmax 10.5 housing. This way the truck stays full factory toyota parts...but I get larger, stronger rear end and larger brakes and axles also.

I cannot understate how massive this is in person......especially now that it has been trussed and linked. It's bigger than "marvins" FJ I posted earlier as he is using a 8.5 tundra rear.

Shes going have a serious rear end....



Not quite finished yet, few details....but pretty much done.





Would of loved to TIG weld her, but would of taken easily twice the time and cost to do so and not really any appreciable difference in strength. I want to move the project along, keep the costs down in certain areas....so MIG is was.....nice work by the guys.





Still a bit more work to do one her....some plug welds, but it will be going out to powder coat soon....

Should be up to the task of handling some whoops and landings at60mph+

Not to mention the occasional rock trail....




I'm so anxious I can even describe....not sure how I'm going to deal with waiting.......this is going be so bad ass....


https://www.youtube.com/watch?v=lqMSKruNmqM
TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:16 PM   #6 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Time to begin the teardown!

Finally dropped her off to start this crazy journey....

Yard sale time!! everything must go!!!

Long list of parts coming off that will be up for sale shortly.

Funny to see her naked....and it's just the beginning.



everything must go!!

Amazing all the stuff inside a truck.....that is now useless to me.

Stopped by to pick up some my stock parts.....

want something? make me an offer.



she's naked!



I was amazed how much stuff I was able to fit into my wife's Toyota Matrix.



Front lower A arms tacked up.....



The guys over at Desert Concepts really doing great work and working with me to make my ideas a reality. Desert Concepts | UTV Jeep Fabrication

It begins.....
TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:17 PM   #7 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
So....the basic cage is getting tacking in and fitted.....things starting to get real. No going back now! Into the deep end now.

There is more to it of course but these are the main tubes. But alot more will go in....harness cross tubes, seat mount tubes. The engine cage tubes will also go thru the firewall and tie in to the cage.



Great work by the guys as seen in the tight tube fitment/notches....having built and welded the cage on my race car I know first hand how hard it is to get roll cage tubing bent and notched to fit this tight.

No gaps=better welds, stronger welds, stronger cage.....safer and more rigid end result.




front tubes....




We went over some design issues/decisions with the rear end which will dictate the rest of the rear cage design/shock mounts. So we placed the axle housing on the ground and talked over some things...basically shock placement, arm lengths, pinion angles ....





Basically came down to either shorting the arms, reducing the travel in order to limit pinion angle deviation. This would be an attempt to place the shocks in a way where I could still used the rear seats....

The right thing to do is use the longer arms which we had planned on, place the shocks in the best position and angle resulting in more travel and less pinion angle deviation at max droop.... the down side? The shock would end up right behind the front seats (like most pickup truck pre-runners) more or less where the rear small FJ door is....making a impossible getting in and out of a rear seat area which I had wanted to maintain like in "marvins" FJ. But his rear shock mounts off the axle so the shock is much farther back which is why his travel is limited.

So we could compromise and use the shorter arms and move the shocks farther towards the rear and have easier access to the rear seats or put things where they work best. Function over convenience.

So .... i did the right thing. It's now officially a 2 seater. I can count the times I had people in the rear seats in 6 years on my hand. The rear seats lived folded down 90% of the time anyway so F-it I didn't come this far to cut corners engineering wise.


So she's is going be a beast for sure, I just hope I will have the balls to rise to challenge. >
TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:17 PM   #8 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
New Instagram account for my FJ build.... Follow the progress and the journey towards speed and control .........and to scare myself and my passengers....

@TrophyFJ

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:18 PM   #9 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Not happy with the first version of the motor mounts I posted up....the guys re-did them....

TIG welded this time.

Sexy, huh?



I love that they take pride is the smallest things.....that one one will ever see....makes me feel good about being in the right hands.

Installed...obviously lots of reinforcing and gusseting will also take place.





Ever wonder whats behind your dash in your FJ?

enjoy....






The guys at DC are magicians......How they cut a perfect circle at the end of a multibend tube (this is the rear downtube in the trunk) and managed to bend the tube just just in order for it to perfectly go thru the hole is just beyond me.



When I built my roll cage in my race car in my garage....I just cut a big square hole in the floor board since I had no idea where I was going to land. (later I put in thick plate and boxed the area per rulebook). If you have ever bent tubing are tried this yourself you will also gaze in amazement.

But I guess that is what separates a garage weekend hero and the PRO's.....once again it's the small things that impress me.


Next step? Fender bulges? what fender bulges? ahahaha....I didn't need those anyway.

Turned a new leaf....into the engine cage we go....

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:18 PM   #10 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Now with the inner fenders gone they have more freedom and access to start tacking in the engine cage main structure, plate the shock towers from inside and reinforce everything before we start running our shock mount tubing structure and figuring out the hydro bump stop placement etc, etc...it's coming together and it's a good day. (Tube goes thru the firewall to the main hoop...) We'll worry about finding a place for all the stuff that is missing later....(air box, batteries etc...)



Blank slate, or as close as we are getting to that anyways. Ok, now the work starts. This going look very different soon. Probably going make the 4" wide fiberglass flares look too small by the time we are done with this.



Measure 10 times cut once right? The guys at the Desert Concepts making progress on the engine cage and tying it into the main rollcage thru the firewall.... Then start working on the shock mount tubes, shock tower reinforcement/plating.... Etc.... The list is long.... But getting shorter one item at a time.





The main structure for the engine cage is in....good way to start the week. The guys working hard and moving the project forward still lots to do. Meanwhile I'm working hard to also keep the project on track. None of this comes easy, this project is the result of hundreds of hours of me sweating in a Steadicam vest humping 60lbs cameras and chasing actors in Hollywood with a camera. I am lucky enough to have a great job in the film industry but I had to work hard to get there and even harder now that I have had some success. The dream of building the dreamcar/truck in my head motivating me at every moment. Goals are everything in life. Whatever your hustle is keep working at it everyday.... While the steps forward may not be big at first they add up....love what you do and do it well. If you want to follow my life behind the camera follow @m3pedro on instagram.





Time to cage the engine compartment.... Someday there will be a fire breathing V8 insides those tubes.... For now she will be stock. We will see how far you can push the 4.0

BEFORE



AFTER



Tack'd in... Clears the new hood fine....Naturally we will make the center section removable to service/remove the engine need be... We haven't started on shock mount/tubing structure... Plus hydro-bump mounting location so there is still a ton of work to go but starting to build momentum...

:rocker::rocker::rocker:

@TrophyFJ on instagram
TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:19 PM   #11 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
So it's official. The state of CA has blessed the build. Also as you can see Deft racing Has contributed a badass fiberglass vented hood, way lighter than stock and works on factory hinges and hardware. If you want one check out their website/IG. Now the guys at have their work cut out for them to keep pushing and make sure we can live up to the nickname. Because with a lisc. Plate like that...I can't be running around on kit suspension �� the flat black gel coat does make me think about a flat black paint job..... Hummm.....



Burning rods....the time has come to strike the TIG torch and move that tiny pool of molten metal forward and take a pile of steel and turn them into pure speed. Who wants to see where all those rods have gone?



Umm yeah, you can say I'm impressed with the mad skills going into my build. As someone who likes to think I can lay down some nice beads....my skills are not on this level...damn...proud of the craftsmanship going into my beast. Robert and the guys desertconcepts are absolutely killing it.



Arc time...lots of it....Robert was burning rods all week... Welding up the lower A-arms... Then the lower rear links....



Turns out Robert used to weld the downhill mountain bike frames at Foes racing back when I used to race. I was CA state DH champ back in 98'. Then raced as a Norba Pro for few years.....He's doing beautiful work welding up the lower A-arms.....



Side of the lower a-arm and the beautiful TIG welding Robert from desertconcepts laying down... If I did this it would look a bit different ...



First A-arm coming together...heim bungs and uniball cup still need go in... Pretty awesome to hold these bad boys in my hands... Massive compared to stock arms... Even makes a +3.5 kit look small. Hard to tell the scale in this pic....

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:20 PM   #12 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Jeep Speed race truck being built right next to mine...if I wasn't so FJ crazy I might consider it. it's a great class to go desert racing in...




My rear axle housing coming to life on the welding table ... Thanks to @desertconcepts for making the most from a 2014 tundra crewmax 10.5" housing.... Fitting creation for the #trophyfj ...... will house a ARB locker and 4.88 gears.....


Trophy FJ build Rear Axle housing by Desert Concepts @TrophyFJ - YouTube

Now this picture gives you a good scale reference on the size of the A-arms!! Can you say #WideWednesday ? Robert working his magic, welding on the bung at the end of the arm here..... Lots of work going into each part of the build. Before, when they were in the computer and now....We trying to do this right the first time. #gottravel ?? Hahaha.




Master welder Robert Wagner from @desertconcepts working his torch on my new lower A-Arms ....awesome to watch him work and learn a few things. Good to be in such capable hands, not just his but all the guys at the shop too. Everyone plays a part and brings something valuable. I'm more anxious than all of you to see this project finished but you can't rush perfection.... Thanks to @cinemilled

TrophyFJ build Video - Tig welding custom A-Arms - YouTube

Nice rig wish I had one of these in my garage....the machine behind most the welds on my beast. Time to burn some rods.....

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:20 PM   #13 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Before..... Time to weld the bung in....yes I said bung.




AFTER .....now my bung is blue and purple ..... But I'm happy about it




The backside....those welds tho... Always challenging to weld when you have a very thick material (bung) to a rather thin sheet metal of the arm. Controlling the arc to put enough heat into the thick material to ensure proper penetration without blowing out (fail) the thinner top material can be tricky. Anyone who has tried it with Oxy or TIG torch knows the struggle. Robert is a seasoned pro so he does this stuff in his sleep....once again proud of the skills and attention to detail that the team at @desertconcepts is putting into the build. Good Friday indeed....

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:21 PM   #14 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Didn't need any this stuff either....



good riddance... amazing how much weight is coming off.....the seats alone weighed a ton. I'm so curious how much she will end up weighing.

Fresh tundra spindle gussets outta the laser cutter...there is a few more pieces not in this picture ....if you need some for your Tundra give them a call.




More #weldporn on my build...it's the small details I appreciate on parts no one will ever see again...




More quality craftsmanship from the guys at the shop... A-arms just about done now....



Drumroll..... Anyone have any guesses what this is going be?

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:21 PM   #15 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
More of master welder Robert Wagner at work on my arms.

@trophyFJ build Video - Tig welding custom A-Arms - YouTube
TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:22 PM   #16 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
The finished lower link mount. Thing of beauty. Tack'd in so we can put everything together and cycle the axle for the first time and start figuring out the rear shock mounts. ... FJ owners will laugh (like I did) when they see where this mount ended up.... It's one thing to have an idea, it's another to actually see it in person. Amazing to see it come together...






So happy to say the lower links are done.... Fresh out of welding rod....



Mmmm.... pure porn, It be a crime to powdercoat over it ..... Might just clear coat it, watcha think?

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:23 PM   #17 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
The welders working overtime at the shop...I wish I had this bad boy in my garage....has been my dream for a long time...

I have a Miller squarewave 170 in my garage.....I put some good arc time on it also...especially for aluminium....the Dynasty would be a dream setup....





anyway.... How long do you think my new lower links are? �� these things are beautiful and look insane mounted up on the FJ.

I think the stock links are what 23" or so? Lets just say.... ... Now it's starting to earn its nickname name now........

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:23 PM   #18 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Who needs a backseat anyways! 😜 I think I only had a couple of people back there a few times in 6 years anyways ...upper triangle will also get boxed to distribute the shock forces more, everything just tack'd in, it all will evolve a lot more as we continue.... Now things getting real interesting!!



Shock mounts and rear cage coming together...the rear wells and sway bar will be a bit of a challenge... Still a lot to figure out....



Like a giant jigsaw puzzle.... One piece at a time.....

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:24 PM   #19 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
The first of many future #tuckedtuesday shots! We got everything tack'd together enough to link her all up and finally cycle her for the first time and start to see how everything lines up. Full bump! Quite a change from stock!! The stock/Icon links I had before are 26" long....we using fabricated boxed TT style Links 55" long! ... More than double, because If it's worth doing, it's worth doing right...




Same shot as before but doors open...all those forces have to go somewhere...shock mount will get more work done to spread the load more. The rear of the FJ has always been a problem, I think we fixed that 😜 ... Now it's the focal point.




Rear upper 4-link mounts tack'd in place so they can cycle everything and mock a bunch stuff up...once the stock gas tank is gone plenty of room down there....




Another view from below of the rear upper links tack'd in and at full bump!! Clears just about everything but we still going to give some "breathing room" in some places ....

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:24 PM   #20 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Got travel? Few feet worth in progress....going where no FJ has gone before....

I could of made my life easier and just bought a Tacoma or something but what fun would that be?




First time seeing her droop .... Kinda had to laugh.

I must be crazy. It's going be a wild ride. You think my links are long enough? 😜 Trophy FJ Lives!

That is of course nowhere near full droop.




Officially #4linked !!Drooped out a bit for the first time...still a lot of work to do but good to see the pieces of the puzzle come together...
I feel like a 10 year old kid on Christmas. Guys at desertconcepts keep killing it. ...this has only been done once before on the Donahoe racer but never like this.....






55" Links give us about 2:1 ratio.... 14" Coilover and 16" bypass should end up around 28" rear travel!! We'll see where we strap it at...

desertconcepts crew making her worthy of her nickname.... I can't wait to drive this....to say I'm excited is an understatement...




The beast is sleeping, but she is going be pissed when she wakes up. Better grab that steering wheel and hold on.... The guys at the shop don't need the lisc. Plate to remind them what they are building anymore. Take one look at that rear end as you walk up to it and when you see the lisc. Plate it's no surprise. In case you were wondering, yes she will be my daily driver. Vented trophy truck hood courtesy of @deft.racing

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:25 PM   #21 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Taken on the day I dropped off the truck and we started to rip parts off and all of a sudden I took a step back and it hit me..... No going back now.....mixed with a little bit of "what the **** am I doing?"




just about full bump on the arms that should do nicely ...




Tack'd in only but it's officially 4-linked....bring on the whoops.....




Can't wait to stick my gopro under here and see these arms working.... can't wait to go out and drive it......and film it and take pictures of it....

Expect some epic videos.



Not re-inventing the wheel.....the equation is so simple.....4 links, big strong axle housing = lots of quality travel. @desertconcepts crew killing it. Good way to end the week. Now we just need to figure out the swaybar to keep the rear in check.

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:26 PM   #22 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
Upper control arms start to take shape...


Still a lot to do .... But we can take a quick look at where we are at....

@TrophyFJ build Progress. 4linked FJ - YouTube

I got 99 problems but fuel capacity ain't one of them...anymore. 32 gallons of premium 87 octane will be going in there.....So yeah I have 4 rotopax for sale is anyone needs one. $50each.




The 192lbs of fuel should help balance out the FJ in flight �� ....I can't wait to burn some fuel in this thing......

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:26 PM   #23 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
The steel housing they made to protect the fuel cell... Tight fit with the rear housing at full bump......but like everything...perfect fit.





Hummm you think my upper control arm is long enough? 😜 tack'ing in the front to see where we are... Not final configuration .... Pretty sure we getting rid of the flimsy stock shock tower. Who wants to see it cycle?




Lowers and upper control arms bolted on and tack'd so we can cycle everything and measure some things...





Here she is bolted up and tack'd together for the first time.... Spindle is from the same Tundra that donated the rear housing......now....Where is the measuring tape? Time to cycle it ... And yes still 4wd. Oh yes.... we are measuring for a custom "tundra" CV made by RCV.





It's been a steady, slow transformation. But you can't rush perfection. As things go together some plans change or we get new ideas.... The ideas develop and this slows the whole process down a bit. It doesn't matter as we only want to do this once......





......and the final update picture for this week....

Full droop....:surprise

Hell yeah.... This is great to see... A sign of things to come... I can't wait to see this thing on wheels! I can't even imagine...

You know those fireside conversations when you high or drunk? ".....you know what would be cool? -what bro? ....an FJ to mob the desert with.....you know 4 link, massive shocks, trophy truck travel and still 4wd...." puff, puff... pass....."yeah...that be sweet"....... I still can't believe I was crazy enough to take that thought seriously...

I can wait to drive it in anger and see how she will handle the speed and the terrain.

Needless to say the rational thing would of been to of just purchased a built pre-runner pickup truck......but what fun would that be?>

TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:27 PM   #24 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
So.....any guesses on travel?

By far the most ever achieved on a FJ...and still 4x4...RCV custom axles will be built.
I've been waiting a long time to get do this..... The guys at @desertconcepts got the UCA tack'd in and we were able to Cycle the front suspension for the first time recently....

TrophyFJ Build update video - Cycling the front suspension. - YouTube

Getting some initial measurements and seeing how everything lines up. Just about zero bump steer and just a little camber change at full bump and droop...should be around 90" wide at ride height.

We probably still going to cut out the stock shock tower and build something proper instead of gusseting the stock tower and plenty of more changes still to come......NOT the final setup. Still lots to do....
But this does get my heart going!!

Trophy FJ coming together !!! Follow the build on instagram! @TrophyFJ
TrophyFJ is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 09:28 PM   #25 (permalink)
Registered User
 
Join Date: Jun 2016
Member # 684786
Location: Burbank
Posts: 43
On the subject of 4wd long travel...

I was just talking about the new 4wd geiser trophy truck....

check this cool clip about it.

They got 24" front travel and 30" in the rear....


Justin Matney’s 4WD Rigid Industries Geiser Built RPM Trick Truck - YouTube


TrophyFJ is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Pirate4x4.Com : 4x4 and Off-Road Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.

** A VERIFICATION EMAIL IS SENT TO THIS ADDRESS TO COMPLETE REGISTRATION!! **

Email Address:
Insurance
Please select your insurance company (Optional)

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 04:55 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 ©2011, Crawlability, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.