L/C Clutch m/c ? - Pirate4x4.Com : 4x4 and Off-Road Forum

bagman · 02-25-2005, 08:46 PM

Is the bore on an older FJ clutch master different than a pickup? Cannt got my clutch to disengage in to my pick up (465/205) it has the stock toy clutch m/c and a chevy slave. In the past I have put this same set in a L/C and had no problems with it. I never tried using the chevy slave though. This might be my problem.

cruiserman · 02-25-2005, 09:30 PM

Use a stock slave.

bagman · 02-25-2005, 09:50 PM

No the question was about the bore on a fj clutch master. what size is it? Cannt use a stock slave any ways the 90 2wd truck was originally an auto. and the the chevy bell housing is a late model one with the slave bracket cast into it.

bagman · 02-26-2005, 09:05 PM

FJ bore 3/4 in. right? Confirm, deny, pass, anyone? Does this have the same bolt pattern as the mini truck.

02-25-2005, 08:46 PM	#1 (permalink)
bagman Registered User Join Date: May 2000 Member # 993 Location: Hangtown, CA Posts: 2,268	L/C Clutch m/c ? Is the bore on an older FJ clutch master different than a pickup? Cannt got my clutch to disengage in to my pick up (465/205) it has the stock toy clutch m/c and a chevy slave. In the past I have put this same set in a L/C and had no problems with it. I never tried using the chevy slave though. This might be my problem. __________________ Rock Zombie & Marine

02-25-2005, 09:30 PM	#2 (permalink)
cruiserman Registered User Join Date: Aug 2000 Member # 1527 Location: Idaho Posts: 1,034	Use a stock slave. __________________ 80, '72 GMC, Odyssey

02-25-2005, 09:50 PM	#3 (permalink)
bagman Registered User Join Date: May 2000 Member # 993 Location: Hangtown, CA Posts: 2,268	No the question was about the bore on a fj clutch master. what size is it? Cannt use a stock slave any ways the 90 2wd truck was originally an auto. and the the chevy bell housing is a late model one with the slave bracket cast into it. __________________ Rock Zombie & Marine

02-26-2005, 09:05 PM	#4 (permalink)
bagman Registered User Join Date: May 2000 Member # 993 Location: Hangtown, CA Posts: 2,268	FJ bore 3/4 in. right? Confirm, deny, pass, anyone? Does this have the same bolt pattern as the mini truck. __________________ Rock Zombie & Marine

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode