Tapping the Saginaw - Pirate4x4.Com : 4x4 and Off-Road Forum

WebWhlR · 06-07-2007, 04:21 PM

Setting up hydro-assit on the 55 in preparation for Rubithon.

I have a saginaw box that needs to get tapped

The question I have is: Where do I tap the box?
(yes, I have experianced help assiting me. They have done quite a few of these but, they were on mini truck boxes)

Any help would be faaaantastic!

WebWhlR · 06-07-2007, 04:27 PM

I think I found it... (dam... always happens right after I post)

http://www.pirate4x4.com/tech/billav...Tap/index.html

freds40 · 06-07-2007, 04:28 PM

One into the vein that runs along the bottom of the box and one in front of where the column comes into the box. The second is less precise as it's a large cavity. Check the tech pages as Billa Vista has done a write up on the Sag boxes.

freds40 · 06-07-2007, 04:30 PM

yup, that's the one

WebWhlR · 06-07-2007, 04:35 PM

quote: It seems like good info but, if anyone else has more input or knowledge... please chime in :end quote

Was not referring to Freds40 above... I was writing when he was posting...

Referring to the URL: http://www.pirate4x4.com/tech/billav...Tap/index.html

WebWhlR · 06-07-2007, 04:38 PM

Quote:

Originally Posted by freds40

One into the vein that runs along the bottom of the box and one in front of where the column comes into the box. The second is less precise as it's a large cavity. Check the tech pages as Billa Vista has done a write up on the Sag boxes.

Great info... thanks Freds40! Exactly what I was looking for!

06-07-2007, 04:21 PM	#1 (permalink)
WebWhlR aka dtrain Join Date: Jun 2006 Member # 74680 Location: SC Mountains Posts: 574	Tapping the Saginaw Setting up hydro-assit on the 55 in preparation for Rubithon. I have a saginaw box that needs to get tapped The question I have is: Where do I tap the box? (yes, I have experianced help assiting me. They have done quite a few of these but, they were on mini truck boxes) Any help would be faaaantastic! __________________ Damon '96 FZJ80 - DD, wheeler Watch out for the coffee h0s

06-07-2007, 04:27 PM	#2 (permalink)
WebWhlR aka dtrain Join Date: Jun 2006 Member # 74680 Location: SC Mountains Posts: 574	I think I found it... (dam... always happens right after I post) http://www.pirate4x4.com/tech/billav...Tap/index.html __________________ Damon '96 FZJ80 - DD, wheeler Watch out for the coffee h0s

06-07-2007, 04:28 PM	#3 (permalink)
freds40 Zeus of the Sluice Join Date: Oct 2002 Member # 14437 Location: Fresno, CA Posts: 2,646	One into the vein that runs along the bottom of the box and one in front of where the column comes into the box. The second is less precise as it's a large cavity. Check the tech pages as Billa Vista has done a write up on the Sag boxes. __________________ Marlin Crawler Sales www.marlincrawler.com 559-252-7295 brendan@marlincrawler.com

06-07-2007, 04:30 PM	#4 (permalink)
freds40 Zeus of the Sluice Join Date: Oct 2002 Member # 14437 Location: Fresno, CA Posts: 2,646	yup, that's the one __________________ Marlin Crawler Sales www.marlincrawler.com 559-252-7295 brendan@marlincrawler.com

06-07-2007, 04:35 PM	#5 (permalink)
WebWhlR aka dtrain Join Date: Jun 2006 Member # 74680 Location: SC Mountains Posts: 574	quote: It seems like good info but, if anyone else has more input or knowledge... please chime in :end quote Was not referring to Freds40 above... I was writing when he was posting... Referring to the URL: http://www.pirate4x4.com/tech/billav...Tap/index.html __________________ Damon '96 FZJ80 - DD, wheeler Watch out for the coffee h0s Last edited by WebWhlR; 06-07-2007 at 04:37 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode