Anyone want my FJ45? - Pirate4x4.Com : 4x4 and Off-Road Forum

RustyNailJustin · 01-02-2008, 07:05 PM

The motor that is

I finally pulling the old F out of my 1963 FJ45 and dropping a 5VZFE Tacoma motor and tranny in.
This F is a great runner, always starts, idles smooth, drives great. It would be a perfect for someone doing a factory resoration, or just needing a good F motor. With it you get the 3 speed (on the floor shift) and Tcase. I just drove her around for the last time today. You can still hear it run for a couple more days, if ya want.
100$ takes Motor,tranny,tcase.
Its in Klamath Falls Oregon,(13 Miles from Cali) But I do come south quite a bit to go wheeling. Be Northern CA in later this month and down to the Hammers in late Feb.

Justin

RustyNailJustin · 01-02-2008, 07:10 PM

This rig is a little strange, I think cause Toyota was still using up all their FJ25 parts in 1963 cause this has a FJ25 intake manifold and a FJ25 Rearend but a off set Tcase

Couple pics of the motor

orangefj45 · 01-02-2008, 07:51 PM

how far south are you coming? i'll take dibs if you can deliver it.

dog walker · 01-02-2008, 08:48 PM

I almost thought for a second there I was gonna have to get into my rental car (here in Kansas City) drive up to Klamath Falls and whoop you're ass! But then I read the rest of the post, and cooled down! BTW Justin, it's 5 degrees here! I laugh!!!

Pooze · 01-02-2008, 08:50 PM

Wilson · 01-02-2008, 08:51 PM

Quote:

Originally Posted by dog walker

I almost thought for a second there I was gonna have to get into my rental car (here in Kansas City) drive up to Klamath Falls and whoop you're ass! But then I read the rest of the post, and cooled down! BTW Justin, it's 5 degrees here! I laugh!!!

lol, -20 here sucka (upper Mn, till saturday)

dog walker · 01-02-2008, 09:37 PM

[QUOTE] [lol, -20 here sucka (upper Mn, till saturday)
/QUOTE]

I laugh, are you sportin' only a piarte LC hoodie? That's all I have for warmth! But it works...

Wilson · 01-03-2008, 09:22 AM

at 5 degrees I was wearing my SnT hoodie. -20 requires some additional layers

Foxfab · 01-03-2008, 10:12 AM

What carb is on there? I'll give ya $$$ for it if its a large sight glass single barrel carb.

And it really has a centered rear end with an FJ25 diff? That IS odd. Does it have FJ25 single wheel cylinder drum brakes too?

orangefj45 · 01-03-2008, 10:22 AM

get in line mike!

as far as the centered rear axle goes, i had one in a 62 and a 63 fj40, both came with the offset t-case. i've seen another one in a 63 as well.

RustyNailJustin · 01-03-2008, 10:45 AM

Quote:

Originally Posted by orangefj45

how far south are you coming? i'll take dibs if you can deliver it.

I will be coming down I-5 in Feb headed to the Hammers. Take a road trip and come get it, it's not that far, 300 miles from my door to Dog Walker's its only a few extra for you

orangefj45 · 01-03-2008, 10:47 AM

wanna bring it with you in feb? i can send you the moola now.

RustyNailJustin · 01-03-2008, 10:52 AM

Quote:

Originally Posted by Foxfab

What carb is on there? I'll give ya $$$ for it if its a large sight glass single barrel carb.

And it really has a centered rear end with an FJ25 diff? That IS odd. Does it have FJ25 single wheel cylinder drum brakes too?

Its a Rochester

I am sure the OEM one was trashed years and years ago. Yea its got a FJ25 rearend, strange little 45, cool though. I am kinda sad to take it away from its origional parts but it's gotta be updated if I am driving this thing to Baja several thousand miles, and backcountry roads in the USA.

RustyNailJustin · 01-03-2008, 10:57 AM

Quote:

Originally Posted by orangefj45

wanna bring it with you in feb? i can send you the moola now.

That would be fine with me I will just throw it on the tralier with the 40. As long as I don't have to drive all over Stockton to get to the drop off point

You can just pay for it when I get there, no rush.

orangefj45 · 01-03-2008, 02:39 PM

supertrapp!!!

wanna swing by the shop with it? buy ya lunch.......

RustyNailJustin · 01-03-2008, 04:27 PM

Yea that will work thats pretty easy to get to if I remember right.

That supertrap is actually pretty quite and works good on this here rig

Course it will be gone with the 5VZFE

mayday · 01-03-2008, 09:36 PM

so is the baja taco out, and the baja 45 in?

NOODLES · 01-03-2008, 09:41 PM

[QUOTE=dog walker;7684246]

Quote:

[lol, -20 here sucka (upper Mn, till saturday)
/QUOTE]

I laugh, are you sportin' only a piarte LC hoodie? That's all I have for warmth! But it works...

I seen you laugh at cold
i was running around in sweat bottoms and a t-shirt.

but the yager kept me warm the awesome pirate snow run night.

RustyNailJustin · 01-04-2008, 09:56 AM

Quote:

Originally Posted by mayday

so is the baja taco out, and the baja 45 in?

Baja 45 is in. Building the Taco would be way less work but then I still have the 45 that has to get done. May as well stick with plan A and build one rig. I already got enough crap

01-02-2008, 07:05 PM	#1 (permalink)
RustyNailJustin Moderator Join Date: Dec 2001 Member # 8568 Location: Klamath Falls,OR,Fruita,CO,Montrose,CO, Posts: 7,011	Anyone want my FJ45? The motor that is I finally pulling the old F out of my 1963 FJ45 and dropping a 5VZFE Tacoma motor and tranny in. This F is a great runner, always starts, idles smooth, drives great. It would be a perfect for someone doing a factory resoration, or just needing a good F motor. With it you get the 3 speed (on the floor shift) and Tcase. I just drove her around for the last time today. You can still hear it run for a couple more days, if ya want. 100$ takes Motor,tranny,tcase. Its in Klamath Falls Oregon,(13 Miles from Cali) But I do come south quite a bit to go wheeling. Be Northern CA in later this month and down to the Hammers in late Feb. Justin __________________ 2012 KOH Team CrossedUp, ADS, Artec, Mike Klensin and Justin Reece. 9TH Place. 2011 LCQ to KOH Team CrossedUp Mike Klensin and Justin Reece. We finished 40th 2010 KOH Team CrossedUp Mike Klensin and Justin Reece. 2009 KOH Team 435 Finished 35th.First Full Frame/Full Body To Finish KOH. TLCA# 5305

01-02-2008, 07:10 PM	#2 (permalink)
RustyNailJustin Moderator Join Date: Dec 2001 Member # 8568 Location: Klamath Falls,OR,Fruita,CO,Montrose,CO, Posts: 7,011	This rig is a little strange, I think cause Toyota was still using up all their FJ25 parts in 1963 cause this has a FJ25 intake manifold and a FJ25 Rearend but a off set Tcase Couple pics of the motor Attached Images __________________ 2012 KOH Team CrossedUp, ADS, Artec, Mike Klensin and Justin Reece. 9TH Place. 2011 LCQ to KOH Team CrossedUp Mike Klensin and Justin Reece. We finished 40th 2010 KOH Team CrossedUp Mike Klensin and Justin Reece. 2009 KOH Team 435 Finished 35th.First Full Frame/Full Body To Finish KOH. TLCA# 5305 Last edited by RustyNailJustin; 01-02-2008 at 07:10 PM.

01-02-2008, 07:51 PM	#3 (permalink)
orangefj45 Registered User Join Date: Aug 2001 Member # 6816 Location: Fawk if I know Posts: 15,276	how far south are you coming? i'll take dibs if you can deliver it. __________________ Maybe you outta stick to legos!

01-02-2008, 08:48 PM	#4 (permalink)
dog walker Discount! Join Date: Feb 2000 Member # 156 Location: Orangevale, CA Posts: 6,785	I almost thought for a second there I was gonna have to get into my rental car (here in Kansas City) drive up to Klamath Falls and whoop you're ass! But then I read the rest of the post, and cooled down! BTW Justin, it's 5 degrees here! I laugh!!! __________________ Jeff Fretwell 72 FJ40 67 FJ45 83 Toyota 4x4 LB

01-02-2008, 08:50 PM	#5 (permalink)
Pooze Granite Guru Join Date: Sep 2005 Member # 104239 Location: Lake Tahoe, Posts: 957	__________________ 1978 FJ40,383 stroker, 350,205,corp 14,dana 60 detroits 5.13's 42" Irocs, and a little tubing. 1974 FJ40-metal tech tubing, 4.88, Detroit rear, Arb front, 60 outers 1967 FJ45-Mater http://www.rubiconfriends.com/ http://www.laketahoehilos.com/ http://www.badrap.org

01-02-2008, 09:37 PM	#7 (permalink)
dog walker Discount! Join Date: Feb 2000 Member # 156 Location: Orangevale, CA Posts: 6,785	[QUOTE] [lol, -20 here sucka (upper Mn, till saturday) /QUOTE] I laugh, are you sportin' only a piarte LC hoodie? That's all I have for warmth! But it works... __________________ Jeff Fretwell 72 FJ40 67 FJ45 83 Toyota 4x4 LB

01-03-2008, 09:22 AM	#8 (permalink)
Wilson Registered User Join Date: Sep 2001 Member # 7233 Location: Paradise, CA Posts: 17,080	at 5 degrees I was wearing my SnT hoodie. -20 requires some additional layers __________________ [COLOR=Red][SIZE=4]ECV 7-11[/SIZE][/COLOR] Serving up a Tsunami of Swagger Last edited by Wilson; 01-03-2008 at 09:22 AM.

01-03-2008, 10:12 AM	#9 (permalink)
Foxfab Registered User Join Date: Oct 2000 Member # 2058 Location: North Kingstown, RI Posts: 2,878	What carb is on there? I'll give ya $$$ for it if its a large sight glass single barrel carb. And it really has a centered rear end with an FJ25 diff? That IS odd. Does it have FJ25 single wheel cylinder drum brakes too? __________________ Undoing years of Toyota engineering one SAS at a time!! 2007 Yaris--1959 FJ25--www.yankeetoys.org Last edited by Foxfab; 01-03-2008 at 10:13 AM.

01-03-2008, 10:22 AM	#10 (permalink)
orangefj45 Registered User Join Date: Aug 2001 Member # 6816 Location: Fawk if I know Posts: 15,276	get in line mike! as far as the centered rear axle goes, i had one in a 62 and a 63 fj40, both came with the offset t-case. i've seen another one in a 63 as well. __________________ Maybe you outta stick to legos!

01-03-2008, 10:47 AM	#12 (permalink)
orangefj45 Registered User Join Date: Aug 2001 Member # 6816 Location: Fawk if I know Posts: 15,276	wanna bring it with you in feb? i can send you the moola now. __________________ Maybe you outta stick to legos!

01-03-2008, 02:39 PM	#15 (permalink)
orangefj45 Registered User Join Date: Aug 2001 Member # 6816 Location: Fawk if I know Posts: 15,276	supertrapp!!! wanna swing by the shop with it? buy ya lunch....... __________________ Maybe you outta stick to legos!

01-03-2008, 04:27 PM	#16 (permalink)
RustyNailJustin Moderator Join Date: Dec 2001 Member # 8568 Location: Klamath Falls,OR,Fruita,CO,Montrose,CO, Posts: 7,011	Yea that will work thats pretty easy to get to if I remember right. That supertrap is actually pretty quite and works good on this here rig Course it will be gone with the 5VZFE __________________ 2012 KOH Team CrossedUp, ADS, Artec, Mike Klensin and Justin Reece. 9TH Place. 2011 LCQ to KOH Team CrossedUp Mike Klensin and Justin Reece. We finished 40th 2010 KOH Team CrossedUp Mike Klensin and Justin Reece. 2009 KOH Team 435 Finished 35th.First Full Frame/Full Body To Finish KOH. TLCA# 5305 Last edited by RustyNailJustin; 01-03-2008 at 04:29 PM.

01-03-2008, 09:36 PM	#17 (permalink)
mayday Granite Guru Join Date: Nov 2003 Member # 24775 Location: WASH Posts: 505	so is the baja taco out, and the baja 45 in? __________________ The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode