Stockton swap meet! - Pirate4x4.Com : 4x4 and Off-Road Forum

ROCK HUGGER · 03-11-2011, 11:26 AM

Georg???? Last years was awesome would love to attend another

Flatty · 03-11-2011, 12:44 PM

Quote:

Originally Posted by ROCK HUGGER

Georg???? Last years was awesome would love to attend another

I think the date is April 2nd this year. I will be going regardless of when it is. Got some crap to sell and more shit to buy. Already saved up some $$ for it.

Dima

TLCHopII · 03-11-2011, 01:29 PM

Drag!
It doesn't coincide with this trip (again)!
Have fun and best of luck with the sales and purcahses.

orangefj45 · 03-12-2011, 07:44 PM

yup, april 2nd. i thought i started a post on here.....whopps!

same place as last year; chip's yard at 4932 waterloo road stockton CA right off hwy99.

info:
date: april 2nd
time: 8am to 2pm
food: yes and damn good!
event fee: freebie
parking: freebie
seller's spots: $10 which includes your entry into a 50/50 cash raffle
kids: they'd better be supervised by an adult. no exceptions!
pets/dogs: please leave them at home
show-n-shine: SURE!

other need-to-know: you don't have to drive a cruiser to the event to get in. keep in mind that we're invited at chips' place as guests so please treat the event and local as such. by showing up you know that you're doing so at your own risk.

if you're bringing stuff, feel free to post up whatcha got on here if you fell the need to pre-sell or test the waters. if you plan on dragging a trailer to the event, it would help us out a lot if you could leave the tow-rig at our shop after dumping the trailer in chips yard. it's a very short distance away and will help prevent us from running out of room. we've already made arrangements to have more room this year and it'll definetly be a little more organized as well.

if you have a minute, tell chip "thanks" for hosting, he'll appreciate it. lots of work goes into this and he does most of it. up until a few months ago he's never even owned a cruiser, but we're slowly starting to convert him from his ford habbit!

i see a 45 project in his future...

enough rambling. just show up!

georg

MCMAIN0121 · 03-13-2011, 12:40 PM

Sweet, cant wait!

Flatty · 03-14-2011, 02:19 PM

Georg sign me up for a spot.
Dima

poor boy pulling · 03-15-2011, 01:57 PM

99% sure my dad my wife and i will be coming up, not sure if we will have anything to sell yet though

Wilson · 03-22-2011, 04:11 PM

Anyone have a 40 series tub in decent enough condition? Don't need a title.

Rat70FJ · 03-22-2011, 08:04 PM

I have a solid 70ish hardtop that's all there, no rust, if anyone's interested.

71fj40 · 03-22-2011, 08:25 PM

any interest in 45lv doors?

lildave · 03-22-2011, 10:14 PM

didnt you pick up a tub from G at his last swapmeet?

Quote:

Originally Posted by Wilson

Anyone have a 40 series tub in decent enough condition? Don't need a title.

chicago · 03-23-2011, 05:32 AM

Ive got FJ40 DRUM axles f/r, complete for STUPID CHEAP I can bring. Cant see to give the fuckin things away.

Looking for FJ60 e brake parts
FJ40 tub to windshield rubber gasket
DS kick vent
side and rear view mirrors
hood pads

Wilson · 03-23-2011, 07:06 AM

Quote:

Originally Posted by lildave

didnt you pick up a tub from G at his last swapmeet?

Grabbed a cowl from him, it wound up going to a scrap yard

Wilson · 03-23-2011, 07:07 AM

Quote:

Originally Posted by chicago

Ive got FJ40 DRUM axles f/r, complete for STUPID CHEAP I can bring. Cant see to give the fuckin things away.

Looking for FJ60 e brake parts
FJ40 tub to windshield rubber gasket
DS kick vent
side and rear view mirrors
hood pads

I'll take the gasket!

Flatty · 03-23-2011, 08:31 AM

Quote:

Originally Posted by Rat70FJ

I have a solid 70ish hardtop that's all there, no rust, if anyone's interested.

How much?

Anyone have a a whole windshield wiper assembly for an early model they are willing to aprt with?

Dima

poor boy pulling · 03-23-2011, 08:48 AM

Quote:

Originally Posted by Wilson

Anyone have a 40 series tub in decent enough condition? Don't need a title.

whats decent enough condition? i have two in my yard, one totally striped and the other has guage panel, switches etc. both have rust in them though

Flatty · 03-23-2011, 09:02 AM

Quote:

Originally Posted by Wilson

I'll take the gasket!

I don't think he is selling one, rather looking for one.

Wilson · 03-23-2011, 09:08 AM

Quote:

Originally Posted by Flatty

I don't think he is selling one, rather looking for one.

Good catch, guess I'll have to use my specter gift certificate

Wilson · 03-23-2011, 09:12 AM

Quote:

Originally Posted by poor boy pulling

whats decent enough condition? i have two in my yard, one totally striped and the other has guage panel, switches etc. both have rust in them though

Don't need gauges, glove box door or ash tray. Biggest thing would be a dash that hasn't been cut to hell, some rust on floors and usual areas would be ok. Don't need a windshield, hood, fenders, aprons, etc. Pics, what year?

poor boy pulling · 03-23-2011, 04:42 PM

Quote:

Originally Posted by Wilson

Don't need gauges, glove box door or ash tray. Biggest thing would be a dash that hasn't been cut to hell, some rust on floors and usual areas would be ok. Don't need a windshield, hood, fenders, aprons, etc. Pics, what year?

umm i dont know

later 70s i think....i have the bare one and im pretty sure the front half is all good its just the rear was where the rust is

lildave · 03-23-2011, 05:31 PM

that sucks, i could have used part of the dash

Quote:

Originally Posted by Wilson

Grabbed a cowl from him, it wound up going to a scrap yard

Wilson · 03-23-2011, 05:45 PM

Quote:

Originally Posted by poor boy pulling

umm i dont know

later 70s i think....i have the bare one and im pretty sure the front half is all good its just the rear was where the rust is

Have any pics? I know the later doors were thicker, what about windshield frames? I have a '70 windshield. If you can snag some pics, I'd appreciate it. I've got a friend in Gardnerville, do you know Geoff Marshall?

Quote:

Originally Posted by lildave

that sucks, i could have used part of the dash

Yeah, went back and forth too many times and I needed to either move it from where I was storing it, or move on. I literally missed it by a few days. The dash was why I grabbed it.

Wilson · 03-23-2011, 06:20 PM

I've got:

-1970 steel hood, no dents or rust
-swinging tailgate doors, same condition
-Fender Aprons, same condition
-Harbor freight 3k winch, was going to use for suckdown but didn't (NEW)
-4 bolt 350 block, good bottom end, could use rings, flat top pistons, Al pan and timing cover. Has a cam with a bad grind. Comp tested at 165 psi across the board before I pulled the heads. Very recent balancer and timing set.
-Mission control panel
-2 person pelican kayak with seats and (2) paddles
-FC belly pan for gm auto/ atlas
-Intake with (2) filters, (1) pre-filter and edge juice w/ attitude for 04.5+ cummins
-(5) Fzj80 factory alloy wheels with (4) matching toyo A/T tires ~75% and a close spare

chicago · 03-23-2011, 07:03 PM

Quote:

Originally Posted by Wilson

I've got:

-1970 steel hood, no dents or rust
-swinging tailgate doors, same condition
-Fender Aprons, same condition
-Harbor freight 3k winch, was going to use for suckdown but didn't (NEW)
-4 bolt 350 block, good bottom end, could use rings, flat top pistons, Al pan and timing cover. Has a cam with a bad grind. Comp tested at 165 psi across the board before I pulled the heads. Very recent balancer and timing set.
-Mission control panel
-2 person pelican kayak with seats and (2) paddles
-FC belly pan for gm auto/ atlas
http://www.pirate4x4.com/forum/showt...ghlight=wilson
-4 seater chassis (no title)

Wilson...Id like to take a gander at that belly pan...
The link you posted is dead???

Keith

Wilson · 03-23-2011, 07:52 PM

Strange, Don must have deleted it... It was his thread. I'll grab some this weekend

03-11-2011, 11:26 AM	#1 (permalink)
ROCK HUGGER Rock God Join Date: Apr 2001 Member # 4329 Location: Jackson CA Posts: 2,389	Stockton swap meet! Georg???? Last years was awesome would love to attend another

03-12-2011, 07:44 PM	#4 (permalink)
orangefj45 Registered User Join Date: Aug 2001 Member # 6816 Location: Fawk if I know Posts: 15,275	yup, april 2nd. i thought i started a post on here.....whopps! same place as last year; chip's yard at 4932 waterloo road stockton CA right off hwy99. info: date: april 2nd time: 8am to 2pm food: yes and damn good! event fee: freebie parking: freebie seller's spots: $10 which includes your entry into a 50/50 cash raffle kids: they'd better be supervised by an adult. no exceptions! pets/dogs: please leave them at home show-n-shine: SURE! other need-to-know: you don't have to drive a cruiser to the event to get in. keep in mind that we're invited at chips' place as guests so please treat the event and local as such. by showing up you know that you're doing so at your own risk. if you're bringing stuff, feel free to post up whatcha got on here if you fell the need to pre-sell or test the waters. if you plan on dragging a trailer to the event, it would help us out a lot if you could leave the tow-rig at our shop after dumping the trailer in chips yard. it's a very short distance away and will help prevent us from running out of room. we've already made arrangements to have more room this year and it'll definetly be a little more organized as well. if you have a minute, tell chip "thanks" for hosting, he'll appreciate it. lots of work goes into this and he does most of it. up until a few months ago he's never even owned a cruiser, but we're slowly starting to convert him from his ford habbit! i see a 45 project in his future... enough rambling. just show up! georg __________________ Maybe you outta stick to legos!

03-14-2011, 02:19 PM	#6 (permalink)
Flatty Registered User Join Date: Feb 2000 Member # 29 Location: Belmont, CA Posts: 6,389	Georg sign me up for a spot. Dima __________________ 1974 FJ40 in the works 2006 F250 crew cab longbed powerstroke for towing duties

03-22-2011, 08:04 PM	#9 (permalink)
Rat70FJ Registered User Join Date: Sep 2003 Member # 22408 Location: Rescue, CA Posts: 3,420	I have a solid 70ish hardtop that's all there, no rust, if anyone's interested. __________________ KI6ZGH

03-22-2011, 08:25 PM	#10 (permalink)
71fj40 Granite Guru Join Date: Mar 2002 Member # 10704 Location: Elk Grove CA Posts: 896	any interest in 45lv doors? __________________ SAW/3LINK/37MTR/ARB/4.88/30Longs/350tbi/th400/Orion

03-11-2011, 01:29 PM	#3 (permalink)
TLCHopII Been round awhile Join Date: Apr 2008 Member # 112145 Location: Honolulu, Hi Posts: 41	Drag! It doesn't coincide with this trip (again)! Have fun and best of luck with the sales and purcahses.

03-13-2011, 12:40 PM	#5 (permalink)
MCMAIN0121 Registered User Join Date: Nov 2006 Member # 82354 Location: Livermore, CA Posts: 143	Sweet, cant wait!

03-22-2011, 04:11 PM	#8 (permalink)
Wilson Registered User Join Date: Sep 2001 Member # 7233 Location: Paradise, CA Posts: 17,082	Anyone have a 40 series tub in decent enough condition? Don't need a title.

03-23-2011, 05:32 AM	#12 (permalink)
chicago Granite Guru Join Date: Oct 2005 Member # 56470 Location: Reno, Nevada Posts: 599	Ive got FJ40 DRUM axles f/r, complete for STUPID CHEAP I can bring. Cant see to give the fuckin things away. Looking for FJ60 e brake parts FJ40 tub to windshield rubber gasket DS kick vent side and rear view mirrors hood pads __________________ 76 FJ40 Mistress Matti, battle maiden!! Newly converted Land use zealot and soap box preacher!!

03-23-2011, 06:20 PM	#23 (permalink)
Wilson Registered User Join Date: Sep 2001 Member # 7233 Location: Paradise, CA Posts: 17,082	I've got: -1970 steel hood, no dents or rust -swinging tailgate doors, same condition -Fender Aprons, same condition -Harbor freight 3k winch, was going to use for suckdown but didn't (NEW) -4 bolt 350 block, good bottom end, could use rings, flat top pistons, Al pan and timing cover. Has a cam with a bad grind. Comp tested at 165 psi across the board before I pulled the heads. Very recent balancer and timing set. -Mission control panel -2 person pelican kayak with seats and (2) paddles -FC belly pan for gm auto/ atlas -Intake with (2) filters, (1) pre-filter and edge juice w/ attitude for 04.5+ cummins -(5) Fzj80 factory alloy wheels with (4) matching toyo A/T tires ~75% and a close spare __________________ [COLOR=Red][SIZE=4]ECV 7-11[/SIZE][/COLOR] Serving up a Tsunami of Swagger Last edited by Wilson; 03-24-2011 at 09:07 PM.

03-23-2011, 07:52 PM	#25 (permalink)
Wilson Registered User Join Date: Sep 2001 Member # 7233 Location: Paradise, CA Posts: 17,082	Strange, Don must have deleted it... It was his thread. I'll grab some this weekend __________________ [COLOR=Red][SIZE=4]ECV 7-11[/SIZE][/COLOR] Serving up a Tsunami of Swagger

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode