Pirate 4x4 banner

RUF = Bad axle wrap!!!!

3K views 10 replies 7 participants last post by  4CrawlR 
#1 ·
I just did my rears up front but now im getting really bad axle wrap, when im backing down a hill and hitting the brakes. Driving forward and hitting the brakes does not do it as bad but is still get some wrap. Is this a normal problem with rears up front? Im thinking about making some spring clamps but I dont know if it will help much?
There are made of 6 82-83 leaves with about 3-4 inches between each leaf! Im getting about 4 inches of lift and there softer than my chevys.
Heres a PIC

 
See less See more
1
#6 · (Edited)
Rears in the front are very soft if you use a stock Pack, but provide amazing flex.

It looks like you still have the place were your torsion bar goes on your axle.
Re-install it should eliminate it all together.

edit: I would use a heimed and threaded joint so you don't lose any flex
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top