Figured Id start a build thread now that I have enough done to warrant one...
Started with an 85 reg cab toy that I bought from a coworker, it had a fresh 22r, weber38, LC engineering header and exhaust, 3 inch procrap lift and 32s. I sold the bed, tires and wheels off of it and started doing work. First job was to get rid of the awful paint, so I scuffed it up and shot it with some krylon khaki rattle cans. Next was to swap in a IFS rear, do a 1 inch roger brown body lift, 2 inch spacers on the front and some sky boomerang shackles, all of which i did at my house in the driveway. I already had a set if 36x12.5 tsl sxs and some 5.29 thirds with a detroit in one so tires and gears were taken care of. Next was to gather parts to do 63 chevy rears, 3" trail mart front springs and shock hoops, skys front hanger, chevy swap kit and ubolt flips, Kongs hi steer arms, Shakerbuilt draglink and tie rod, all pro rock sliders, warn 9.5 ti, and dual cases. Got all of the parts together and got time to get out to a buds shop this past weekend and get the suspension and steering done. Still have to order shocks prolly gonna go with a set of 14" bilsteins, Weld on the sliders, order a budbuilt xmember and install the duals, and get a tube flatbed and exo done so I can keep a windshield in it when i happen to flop it on the trail. Anyhoo heres the pics so far, enjoy.
easy
-j-rOd:smokin::grinpimp:
Started with an 85 reg cab toy that I bought from a coworker, it had a fresh 22r, weber38, LC engineering header and exhaust, 3 inch procrap lift and 32s. I sold the bed, tires and wheels off of it and started doing work. First job was to get rid of the awful paint, so I scuffed it up and shot it with some krylon khaki rattle cans. Next was to swap in a IFS rear, do a 1 inch roger brown body lift, 2 inch spacers on the front and some sky boomerang shackles, all of which i did at my house in the driveway. I already had a set if 36x12.5 tsl sxs and some 5.29 thirds with a detroit in one so tires and gears were taken care of. Next was to gather parts to do 63 chevy rears, 3" trail mart front springs and shock hoops, skys front hanger, chevy swap kit and ubolt flips, Kongs hi steer arms, Shakerbuilt draglink and tie rod, all pro rock sliders, warn 9.5 ti, and dual cases. Got all of the parts together and got time to get out to a buds shop this past weekend and get the suspension and steering done. Still have to order shocks prolly gonna go with a set of 14" bilsteins, Weld on the sliders, order a budbuilt xmember and install the duals, and get a tube flatbed and exo done so I can keep a windshield in it when i happen to flop it on the trail. Anyhoo heres the pics so far, enjoy.
easy
-j-rOd:smokin::grinpimp: