Where to buy DOM tubing or fabricate roll cage - Pirate4x4.Com : 4x4 and Off-Road Forum

hyghlndr · 04-29-2012, 07:54 PM

Looking for suggestions on places with decent prices on DOM tubing (probably 1&3/4 inch) reasonably close to Wilmington DE / Philadelphia PA area.

If I decide to have the cage built by a shop, any suggestions? It would be for an early Bronco.

2000sahara · 04-30-2012, 12:39 PM

I got a stick frim Steel and metal liquidators /Fazzios a few weeks ago. It's located at the end of old airport rd. in New Castle. They don't usually carry it in stock but can have it shipped from the NJ store for you the next day. Think I paid $120 for a 22' stick.
If you decide to pay someone... A to Z fabrication in PA. Does good work. His name is ZachV on the boards.

mwebb · 05-01-2012, 03:08 PM

dillsburg aero palne works/aka "charles vogelson" they have everything and when i get qoutes they are the cheapest in pa and they will ship everywhere
there right out side of harrisburg, pa in dillsburg

hyghlndr · 05-04-2012, 11:04 AM

Thanks for Dillsburg location, they were about $1.50 less per foot.

Any suggestions on "regular" tubing for another project (they both carry only DOM) ?

I just bought a jd2 bender and two dies.

kensauto · 05-14-2012, 02:23 PM

High Tech Metals, 6771 Linglestown Road Harrisburg, PA 17112
(717) 540-5981. Great place to deal with. Domestic made steel.
Dillsburg aeroplane was .40 to .50 cheaper on most stuff like 1 1/2 and 1 3/4 .120 wall. But ask where it is made

Circus Master · 05-16-2012, 06:47 PM

Penn Steel

04-29-2012, 07:54 PM	#1 (permalink)
hyghlndr Registered User Join Date: Dec 2009 Member # 149057 Posts: 27	Where to buy DOM tubing or fabricate roll cage Looking for suggestions on places with decent prices on DOM tubing (probably 1&3/4 inch) reasonably close to Wilmington DE / Philadelphia PA area. If I decide to have the cage built by a shop, any suggestions? It would be for an early Bronco. Last edited by hyghlndr; 04-29-2012 at 07:57 PM.

05-01-2012, 03:08 PM	#3 (permalink)
mwebb Wheeler Join Date: Jul 2010 Member # 164351 Location: dillsburg, pa Posts: 203	dillsburg aero palne works/aka "charles vogelson" they have everything and when i get qoutes they are the cheapest in pa and they will ship everywhere there right out side of harrisburg, pa in dillsburg __________________ ROCK'S GET MY TIRES STICKY dd-07 4dr jk on 37's yadayadayada rip-76 cj7 on 40's new project 2 seater go fast type 460 bbf 1tons 42's need sponsors for ECORS/RCROCS series

05-16-2012, 06:47 PM	#6 (permalink)
Circus Master Wheeler Join Date: Jan 2007 Member # 84963 Location: Waterbury, CT Posts: 264	Penn Steel __________________ Clayton Off Road, Inc. 1261 Meriden Road Waterbury, CT 06705 203-757-0339 www.claytonoffroad.com cwalters@claytonoffroad.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-30-2012, 12:39 PM	#2 (permalink)
2000sahara Registered User Join Date: Jan 2007 Member # 84476 Posts: 35	I got a stick frim Steel and metal liquidators /Fazzios a few weeks ago. It's located at the end of old airport rd. in New Castle. They don't usually carry it in stock but can have it shipped from the NJ store for you the next day. Think I paid $120 for a 22' stick. If you decide to pay someone... A to Z fabrication in PA. Does good work. His name is ZachV on the boards.

05-04-2012, 11:04 AM	#4 (permalink)
hyghlndr Registered User Join Date: Dec 2009 Member # 149057 Posts: 27	Thanks for Dillsburg location, they were about $1.50 less per foot. Any suggestions on "regular" tubing for another project (they both carry only DOM) ? I just bought a jd2 bender and two dies.

05-14-2012, 02:23 PM	#5 (permalink)
kensauto Newbie Join Date: Jul 2009 Member # 139321 Location: wellsville,pa Posts: 19	High Tech Metals, 6771 Linglestown Road Harrisburg, PA 17112 (717) 540-5981. Great place to deal with. Domestic made steel. Dillsburg aeroplane was .40 to .50 cheaper on most stuff like 1 1/2 and 1 3/4 .120 wall. But ask where it is made