Northeast forsale wanted and trade!!-POST ONLY HERE

[mike_belben]

78/79 ford high pinion, kingpin dana 60 steer axle.

Sold

[SideshowBob]

I have an unused new track bar mount/bracket for axle side, I believe this is for 8.8 but looks like it could be made to work for various other applications. I'd use it if I had a rear track bar

$50

http://www.mountainoffroad.com/_e/Fo...ar_Bracket.htm

[lojim]

Originally Posted by lojim

http://www.pirate4x4.com/forum/showt...7#post14478787

1989 e350 diesel conversion van - $4500 - Jim Thorpe PA (make offers)

Still available. $4000 or open to trades.

[weldrup]

Lookin for four of them 37x12.5x16.5 Goodyear military take offs, if anyone has some not to far from Rochester NH area call or text or PM what ever, 603 765 8318 thanks!

[ct67_72]

I'm looking for a junk or loaner 39-40" tire for mock up and measurement purposes.et me know if you can help.

[muddyrover]

Rig was found in a junkyard with no engine covers or carb. Engine is siezed, but suspect it was a recent military rebuild when parted out. It's sitting in a military engine shipping crate, it's compete minus carb, ancillaries, and timing chain tensioner if i remember correctly.

located in 12068.

[badlarry]

Thought I'd shoot this up.
http://www.pirate4x4.com/forum/showt...&highlight=v30

[angryblack]

So im trying to move some stuff..Im open to trades as well..Really need a front locker(not interested in lunchboxes) and some 5.38s for 60s(gotta be thick gears or have spacers), 40" Plus LED light bar with mounts,A slightly built or great shape EFI 351w, 400 CID small block chevy in buildable shape, or tell me what else you have..

80s dodge external srw dana 60
In good shape and from a southern truck..Minus the 4.10 gears and open diff.All the nuts and bolts are still there..I pulled it apart to get the gears out..

$450 as it is but i will do $375 if i get to keep the shafts as spares

80s chevy dually 70hd

I think its 3.73s in it but i can check again. This is the 4" tubes and 70 something wide rear..No brakes at all on it..Its been sandbalasted by somebody else and painted with por15

$200

Hydro assist steering setup

Comes with the surpluss center 2"X8" ram, 1/4 hoses with all the misc fittings, DIY4X saginanaw steering cap and matching drilled and tapped top cap.(i have a 2wd chevy box that can go along with it but its stock and has no steering arm) This stuff has only three trail rides on it.I went to full hydro..

$100 pics to come soon

Have a 1/8" thick 4" diameter aluminum tube, was for a project and i didnt need it..

$50

1997 LT1 Z28 cooling fans..I have them with the shroud but its pretty beat from being whored out from drag car to drag car..The fans are in perfect shape.

$80
[IMG][/IMG]

1993 west wood travel trailer propane stove with oven. Works great just tested it. Its a small 4 burner stove from my camper..No need for it and cant fit it into the new tow pig.[IMG][/IMG]

$100

Overhead vent for the stove above works great with the light still working.

$50

Have a power converter with a 30 foot cord and adapter.From a small travel trailer. Worked great when removed..Just dont need it for my build. [IMG][/IMG]
[IMG][/IMG]
$50

I also have one privacy bathroom window and a clear window from my camper..They fit two in deep walls and have good trim rings except one larger one that has notches on the outer edge..They are from Herr.. I want 35 bucks each for the smaller ones and 45 for the larger ones.The one without the ring i will sell for 30..
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Those are the larger ones.

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

Those are the smaller ones.

IVe gotta get pics of this stuff up but feel free to email me your offers or pics requests to agressivebudhist@yahoo.com

[KingTheZJ]

Rochester NY

Playing with the idea of comp cutting the rear of my ZJ. So the current bumper setup with tire carrier would be for sale.

It has some scratches from wheeling and a little surface rust around the hinges. the license plate is wired for a light.

bumper build here
http://www.jeepforum.com/forum/f37/z...build-1209065/
it has a tire carrier on it now (post 37 in that thread).

I can have it in East Haddam CT later this week for a $50 deposit through paypal

will ship, you pay shipping ($200 to FL) + $50 handling/packaging and i'll arrange shipping. you would have to pick it up at the nearest facility.

Price: $650

Pics:
http://www.jeepforum.com/forum/f37/z...build-1209065/

[ct67_72]

Originally Posted by angryblack

Hydro assist steering setup

Comes with the surpluss center 2"X8" ram, 1/4 hoses with all the misc fittings, DIY4X saginanaw steering cap and matching drilled and tapped top cap.(i have a 2wd chevy box that can go along with it but its stock and has no steering arm) This stuff has only three trail rides on it.I went to full hydro..

agressivebudhist@yahoo.com

Ill take the hydro assist stuff. I have a good 351w if you were interested in it. came out of a running truck, I believe it was a 93. I pulled the upper intake to use the injectors for something else, otherwise complete, with harness. Im in central Ct. Otherwise I will take that stuff anyway

[25%Jeep]

Wanted

I'm looking for a late 70's early 80's rear Dodge Dana 60. SRW 4.10's. Brakes are not important, I already have a rear disc setup. I'm going full width in my CJ7 so I will have a shortened dana 60 for sale soon. I'm located in Manchester, NH. PM me location and price.

Thanks.

[CESCO]

2001 Jeep TJ, 49k miles, asking $10k, located in Clarion, Pa.

http://www.pirate4x4.com/forum/showt...2#post14533012

[badlarry]

I'm looking for a late 70's early 80's rear Dodge Dana 60. SRW 4.10's. Brakes are not important, I already have a rear disc setup. I'm going full width in my CJ7 so I will have a shortened dana 60 for sale soon. I'm located in Manchester, NH. PM me location and price.

This guy has a D71; high gears though, thought I'd show you; didn't know if you could deviate a little from what you were thinkin..

http://maine.craigslist.org/pts/3072257006.html

[25%Jeep]

Originally Posted by badlarry

This guy has a D71; high gears though, thought I'd show you; didn't know if you could deviate a little from what you were thinkin..

http://maine.craigslist.org/pts/3072257006.html

Thats not a bad idea, but I already have a shortened dana 60 in my CJ and I'm going full width. Mine already has a locker and rear disc brakes, I'm really only looking for a housing to swap everything over to.

[badlarry]

Thats not a bad idea, but I already have a shortened dana 60 in my CJ and I'm going full width. Mine already has a locker and rear disc brakes, I'm really only looking for a housing to swap everything over to.

Yeah, I talked to the dude, he was pretty cool. He has some other junk too, xfer cases, driveshafts, etc... Might b worth a look...

[xj3604brrl]

/forum/axles-tires-wheels-sale/1076268-uprgraded-c9-25-d44.html

D44 front w/ upgraded / newparts
C9.25 rear upgraded/ new parts

worth checkin out, need to add O.B.O. to it also

[lojim]

Originally Posted by lojim

Still available. $4000 or open to trades.

http://www.pirate4x4.com/forum/showt...7#post14478787

1989 e350 diesel conversion van.
7.3 IDI
ATS turbo
Gearvendors overdrive kit

The wife really wants this gone. Open to ALL offers/trades.

[raze1287]

vision x 52" led light bar
/forum/misc-stuff-sale/1077140-vision-x-52-led-lightbar.html

1000 obo

[mika360]

Brand new, never fired, still on the same crate it was shipped from GM with, still has GM break in oil in it, complete except for alternator & steering pump. I have come to the conclusion I will never use this so putting it up for sale $2000
Numbers are 295 hp, 335 tq, injectors are 25323974 24.8 Lb/hr, 4 hole nozzle I believe.

Its posted in the regular engine/trany/tcase section as well.

[Newoldscotts4x4]

Asskst

Originally Posted by angryblack

So im trying to move some stuff..Im open to trades as well..Really need a front locker(not interested in lunchboxes) and some 5.38s for 60s(gotta be thick gears or have spacers), 40" Plus LED light bar with mounts,A slighhtly uilt or great shape EFI 351w, 400 CID small blco chevy in buildable shape, or tell me what else you have..


OLD school slammed buick 225 on bags..Its a good cruiser with a rebuilt 455 runs on 87 octane,th400, 3.23 gears.All full air ride with new suspension poly bushings. Fresh 24X10 wheel with falkens.Interior was done by Gibbs auto in riverdale GA and is 90% ostrich black excet for the dash.The dash was vac formed by just dashes.The car is stored in a sealed box by JFK airport.

Sold

2009 LY6 from an isuzu npr,

has 27k on it and is complete including the motor mounts..No harnessas its chopped but i have the mass air and the pcm.

sold

80s dodge external srw dana 60
In good shape and from a southern truck..Minus the 4.10 gears and open diff.All the nuts and bolts are still there..I pulled it apart to get the gears out..

$450 as it is but i will do $375 if i get to keep the shafts as spares
U
80s chevy dually 70hd

I think its 3.73s in it but i can check again. This is the 4" tubes and 70 something wide rear..No brakes at all on it..Its been sandbalasted by somebody else and painted with por15

$200

4L80E 2wd this is from a truck and has a drum e brake on the rear..Its a gm reman tranny. Was in a running truck. Was gonna use it for my trail pig but didnt need overdrive.Comes with the converter for an ls engine.

$300

Hydro assist steering setup

Comes with the surpluss center 2"X8" ram, 1/4 hoses with all the misc fittings, DIY4X saginanaw steering cap and matching drilled and tapped top cap.(i have a 2wd chevy box that can go along with it but its stock and has no steering arm) This stuff has only three trail rides on it.I went to full hydro..

$100 trade pending on this

1997 LT1 Z28 cooling fans..I have them with the shroud but its pretty beat from being whored out from drag car to drag car..The fans are in perfect shape.

$80

1993 west wood travel trailer propane stove with oven. Works great just tested it. Its a small 4 burner stove from my camper..No need for it and cant fit it into the new tow pig.

$100

Overhead vent for the stove above works great with the light still working.

$50

Have a power converter with a 30 foot cord and adapter.From a small travel trailer. Worked great when removed..Just dont need it for my build.

[B]$5) gotta get pics of this stuff up but feel free to email me your offers or pics requests to agressivebudhist@yahoo.com

2nd inline for the hydro assit with cash

[whiskeydented]

I'm looking for some 33-36" tires for 16.5" rims in the Connecticut area. Send me a pm if you have anything. Thanks.

Mike

[clean4drxj]

I'm about to regear my pig to 4.56's and want to trade my BFG MT's 65-70% tread( 1 plug, 0 cuts or rockrash) they're currently mounted on AR outlaw2's alloys in decent shape no bends in them or scrapes for 33's in decent shape mounted on rims or will trade tires for tires. also will sell these for the right price.. PM me if interested!

[badlarry]

Looking for a set of 6" front springs for my chebby 1ton 73-87.. Thanks.

[SideshowBob]

Sold

[BIGJMCCONNELL]

Talk of springs reminded me of a set of Toyota springs I should list...

From a 79 Pickup. I took it off a truck with a blown motor. I believe it is about a 4" lift, maybe more. Includes blocks and springs for the rear, springs for the front, a couple shackles, track bar bracket, drop drag link. I might have some other parts from that truck to sweeten the deal

$300 obo