Northeast forsale wanted and trade!!-POST ONLY HERE

[25%Jeep]

For Sale:
5.7 Chevrolet Vortec Engine currently in a 1999 Chevrolet 2500 Van. The Van has 175000 miles on it but I was told the engine only has 20000 on it. The engine still has clean black paint on it. The van runs and moves but not drivable due to a blown brake line. I planned on installing the engine in my Jeep CJ7 but do not have the time for it right now, Come hear it run, it's located in Salem, NH.

$650.00

[budget76]

Last price drop, $2500. Really don't want to drive back to NJ and pull the lockers and list it for $1800. This thing is awesome, I wish I could justify buying it myself.

Video http://youtu.be/4P9Klfe6Spw

Bump for more pictures

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

Uploaded with ImageShack.us

• Buick 231 Engine Swap
o Cammed (unknown specs), 4bbl Edelbrock Intake, Edelbrock 1406 4bbl Carb (electric choke)
o HEI Distributor. New plugs, oil change recently
o Aluminum Summit radiator
o Headers
o New lifters
o New mechanical fuel pump <3k miles
• TH350 Automatic Transmission
o Posi-shift trans kit
o B&M Ratchet Shifter
o Large oil cooler used as a tranny cooler
• Stock Toyota axles
o 4.10 gears.
o ARB air lockers front and rear. Older style ARB Compressor
o New brakes all around <500 miles
• 35”x12.5”x15” Mud King XLT tires on chrome wagon wheels.
o Some pictures show black, they are now chrome.
o Some pictures show it on 33” all terrain tires, they are now gone
• Stock suspension, minor trimming of the fenders and massaging of the cab corner to fit the 35’s
• Exterior
o Fresh paint two years ago.
 10ft job. The bodywork was done quickly, and is starting to show in some spots.
o Has a sun/moonroof from a 1st gen Toyota pickup with the removable window. Great in the summertime
o Quick-release doors. Undo 2 12mm bolts on each door, loosen the other two, and lift the door up and off.
o Weatherguards over windows
o New windshield within the last year
• Interior
o Comfortable, multi-adjustable bucket seats
o Center console from a Jeep Cherokee Classic. Fits perfectly in the interior setup
o Rear sliding window
o JVC AM/FM/CD/Aux with 4 speaker system
o New heater core within the last year

We purchased an 82 with the components on this truck now, but it was in worse shape than expected. All the parts were then swapped to the 85’ body and frame. Nearly every bolt/nut has been touched on this truck within the last 2 years.

This truck has been amazing off-road, and done everything we have found to challenge it with no effort. See the links for pictures and video. It was a blast last year in the blizzards, and only got stuck when I attempted to pull out a F250 plow truck in 2 feet of snow. It was taken to the mountains of PA, and was able to do nearly everything that a friend with a Scout2 on 37”s did.

On road it is very comfortable at 65MPH. It is very stable and comfortable at that speed, but the RPM’s limit going much faster, as we did not like sustaining too many revs for a long time. We had planned to swap in TH400 transmission with overdrive, but never did.

See the links below for pictures and videos. Some videos show it on the old All Terrain tires, but it gives you an idea of the truck. It is very capable, and the videos (or cameraman) do not do the truck justice. Will update with more pictures and possibly more video, haven’t had time to search the hard drives yet.
http://toyota1985forsale2arb.shutter...%3dSHARE3SXXXX
PRETTY SURE THERE'S A NEW VIDEO, CAN'T CHECK AT WORK. MAKE AN OFFER, LET'S GET IT SOLD.

[YuNiT]

I bought these off of Smike and will be going another route, here is Smike's original post.

I have (4) 16" RACERUNNER SWAY 2.5" Air shocks.

all 4 no leaks and in good shape with a few nicks and dings and tire rub marks.
on shaft had a steel eye welded on, worst cast needs a new shaft and new eye. (DONT ASK, RACE PREP ON TIME LINE MAKES YOU DO THINGS)

I ordered a lower mount for the damaged shock, it may need a new shaft, I haven't cut off the temporary fix yet. There is another shock that has a bent upper mount, it may be usable the way it is.

I paid $700 for the shocks and would like to get that back, I'll throw in the lower mount that I purchased.

[Newoldscotts4x4]

Originally Posted by budget76

Last price drop, $2500. Really don't want to drive back to NJ and pull the lockers and list it for $1800. This thing is awesome, I wish I could justify buying it myself.

Video http://youtu.be/4P9Klfe6Spw

Bump for more pictures

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

By budget76 at 2012-08-03

Uploaded with ImageShack.us

• Buick 231 Engine Swap
o Cammed (unknown specs), 4bbl Edelbrock Intake, Edelbrock 1406 4bbl Carb (electric choke)
o HEI Distributor. New plugs, oil change recently
o Aluminum Summit radiator
o Headers
o New lifters
o New mechanical fuel pump <3k miles
• TH350 Automatic Transmission
o Posi-shift trans kit
o B&M Ratchet Shifter
o Large oil cooler used as a tranny cooler
• Stock Toyota axles
o 4.10 gears.
o ARB air lockers front and rear. Older style ARB Compressor
o New brakes all around <500 miles
• 35”x12.5”x15” Mud King XLT tires on chrome wagon wheels.
o Some pictures show black, they are now chrome.
o Some pictures show it on 33” all terrain tires, they are now gone
• Stock suspension, minor trimming of the fenders and massaging of the cab corner to fit the 35’s
• Exterior
o Fresh paint two years ago.
 10ft job. The bodywork was done quickly, and is starting to show in some spots.
o Has a sun/moonroof from a 1st gen Toyota pickup with the removable window. Great in the summertime
o Quick-release doors. Undo 2 12mm bolts on each door, loosen the other two, and lift the door up and off.
o Weatherguards over windows
o New windshield within the last year
• Interior
o Comfortable, multi-adjustable bucket seats
o Center console from a Jeep Cherokee Classic. Fits perfectly in the interior setup
o Rear sliding window
o JVC AM/FM/CD/Aux with 4 speaker system
o New heater core within the last year

We purchased an 82 with the components on this truck now, but it was in worse shape than expected. All the parts were then swapped to the 85’ body and frame. Nearly every bolt/nut has been touched on this truck within the last 2 years.

This truck has been amazing off-road, and done everything we have found to challenge it with no effort. See the links for pictures and video. It was a blast last year in the blizzards, and only got stuck when I attempted to pull out a F250 plow truck in 2 feet of snow. It was taken to the mountains of PA, and was able to do nearly everything that a friend with a Scout2 on 37”s did.

On road it is very comfortable at 65MPH. It is very stable and comfortable at that speed, but the RPM’s limit going much faster, as we did not like sustaining too many revs for a long time. We had planned to swap in TH400 transmission with overdrive, but never did.

See the links below for pictures and videos. Some videos show it on the old All Terrain tires, but it gives you an idea of the truck. It is very capable, and the videos (or cameraman) do not do the truck justice. Will update with more pictures and possibly more video, haven’t had time to search the hard drives yet.
http://toyota1985forsale2arb.shutter...%3dSHARE3SXXXX
PRETTY SURE THERE'S A NEW VIDEO, CAN'T CHECK AT WORK. MAKE AN OFFER, LET'S GET IT SOLD.

Budget76,
my friend is interested, can i get your contact info

[GUNSLINGER 67]

Originally Posted by 94toytruck

I have a pan in the shop from my 02 ram 1500 with a 4.7L 45rfe I pulled for bigger one with a sender.

Thanks , but I just ordered one from a dealer .............I had no idea they were so inexpensive ....$43 delivered , new , OEM

[YuNiT]

Pics.

2 put on my rig for mockup.

[scooba]

lookin to buy a round pattern 205 for a th400 somewhere near south jersey

[CtChevy]

So seeing if there is any interst in my motor, 4.2 rebuilt recently but unknown milage, HEI conversion with msd wires, motorcraft 2100 carb pumbed with braided fuel line and fuel reg. Motor runs strong. Has M.O.R.E motor mount lift. It has a 700r4 mated to it with a novak adapter trans was rebuilt by me cert. GM tranny tech. a few years ago but never ran. Will sell the whole set up for 500.00. PM me here if your interested. Willing to split up if there is interest in all parts.

[mmetzger001]

still got some stuff left over from my truck

golen 4.6 http://www.pirate4x4.com/forum/showt...751&highlight=

everything inside make offers!!

[wskboarderx]

Im selling my 2000 Nissan Xterra. Im asking $5,000 for it.

http://hudsonvalley.craigslist.org/cto/3175504470.html

It has a set of 5 BFG all terrain KO tires, 2 inch BL, 2 inch SL. Rock sliders by Rocky Road Outfitters, Tube bumper made from 2 inch .120 wall tube and 4 KC highlights.

Call me with any other questions - 845-416-1094

-Devin

[Stranger ranger]

16'+3' beaver, 3500# axles, brakes on both. Brakes need adjusted and it could use a set of tires. All lights work, new 5k pound tongue jack, 2-5/16" coupler. Wooden deck and is in good shape. Looking to get $1500 or best offer. I"ll entertain trades as well, like a set of 35/36" tires for 15" rim, or with rims, or plus some cabbage.

Uniontown, Pa

[jl300101]

I am selling a super clean 1978 FORD f350 custom. The truck is a dually with a flat bed PTO driven dump body. Has 4.9L straight 6 with a 4 speed.
The truck has new
-power steering pump
-front brake pads
-full tune up with cap, rotor, plugs, and wires
-front tires
The truck also has hard to find, heavy ply, military mud tires in the rear.
Body, frame, and floors are solid.
Truck includes 2 spares and various stake sides.
asking $3000
Call/Text Josh four one three 668 5357

[Timmay]

Two black steel wheels, 6x5.5, 4" BS. These are new but have been sitting outside. $40 each. There are two more with 35" BFG ATs mounted on them. $60 each for those. ATs were mounted and used for dyno pulls on my buggy. They have 10% tread or so

Also have a set of 5 Maxxis Trepador Competition tires that do not hold air. They are a great set to vulcanize. Tread was recently regrooved. Since they are regrooved they measure short, 35.5" or so aired up. Asking $40 each. Great for planters or tire swings!

PM, email tim@liquidironindustries.com, or call 856-336-2639 x101.

[blowntaco]

What size wheel to the treps fit? Any sidewall gashes?

[Timmay]

Originally Posted by blowntaco

What size wheel to the treps fit? Any sidewall gashes?

17". Yes there are sidewall gashes.

[PFSprayLining]

looking to sell a sidekick i picked up last year for the 16 valve motor to put in my samurai. It runs good and only has 83kmi. Willing to sell the whole vehicle or just the motor. Please contact me 518-469-3606

[TiTRD]

1987 Toyota Land Cruiser

$2k obo in Lakes Region, NH
Open to trades.

Carb'd Edlebrock 350 Crate Motor (mileage unknown, 193k on chassis). Carb needs love, motor is strong.
H42 4 Speed
3" OME Dakar lift
15% tread 33" ATs
Bumpers
Factory solid axle with 9.5" ring gear f/r 3.73 open/open

The rockers are rusted as are the rear quarter panels. Frame is getting punky behind the rear passenger door. Body mount behind the driver side rear door is gone. I have pictures of the rust, photobucket is failing on errors and won't let me upload. I can email them.

I've been driving to this to work and around town, drives down the road really nice for a lifted 25 year old land yacht. A little work on the carb or fuel injection will wake this thing right up.

[YuNiT]

Originally Posted by YuNiT

I bought these off of Smike and will be going another route, here is Smike's original post.

I have (4) 16" RACERUNNER SWAY 2.5" Air shocks.

all 4 no leaks and in good shape with a few nicks and dings and tire rub marks.
on shaft had a steel eye welded on, worst cast needs a new shaft and new eye. (DONT ASK, RACE PREP ON TIME LINE MAKES YOU DO THINGS)

I ordered a lower mount for the damaged shock, it may need a new shaft, I haven't cut off the temporary fix yet. There is another shock that has a bent upper mount, it may be usable the way it is.

I paid $700 for the shocks and would like to get that back, I'll throw in the lower mount that I purchased.

Bump. I can fix these for the added cost of the parts on top of the $700.

[CtChevy]

Originally Posted by Timmay

Two black steel wheels, 6x5.5, 4" BS. These are new but have been sitting outside. $40 each. There are two more with 35" BFG ATs mounted on them. $60 each for those. ATs were mounted and used for dyno pulls on my buggy. They have 10% tread or so

Also have a set of 5 Maxxis Trepador Competition tires that do not hold air. They are a great set to vulcanize. Tread was recently regrooved. Since they are regrooved they measure short, 35.5" or so aired up. Asking $40 each. Great for planters or tire swings!

PM, email tim@liquidironindustries.com, or call 856-336-2639 x101.

whats the story with the 9 inch center in the weeds?

[crapr6]

Hey guys I have 5 Goodyear wrangler MTR with Kevlar for sale in NJ. They have about 6k miles on them and about 8 trips to Rausch creek. The tread is like new and the side lugs have small amount of rock rash. The spare is brand new with NO use. These tires are awesome and only reason for selling them is to go with a set of 35's. Need to get $800 for 5 tires and willing to drive up to 50 miles from Lacey NJ 08734. Thank you.

[the freeak]

Originally Posted by CtChevy

whats the story with the 9 inch center in the weeds?

Pretty sure it has a cracked pinion support....but I might be wrong.

[Pokeman]

PM me. Corning, NY.

The Skull beadlocks I have run the last 12 months are for sale. The beadlocks were new when I put them on.

They are already to go, first with cash gets them.

16.5's, 8 on 6.5. bolts come with them

$500 for all 4

latest dirty picture of them,

[theDMAXman]

i have 4 brand new, never run tires would like to trade up to 40-42s

[Newoldscotts4x4]

i have a set of 4 Super swamper TSL radials 37x12.50x16.5 mounted on 10" wide 8x6.5 pattern steel rims, i used these as rollers for a project and now i dont need them, they are worn evenly almost to the wear bars in the middle and the tread gets deeper as you get to the sidewalls, never offroaded, asking $150 in Sykesville MD, i can get pics upon request

[SideshowBob]

http://www.pirate4x4.com/forum/usa-n...l#post14853453