How about a Norcal job-hookup thread?

[knucklehead 61]

i am looking to hire a summer intern employee to install HVAC duct work in commercial jobs. the union says i can only hire one intern & they say the position ends sept. 30th.
pay is $11.00 / hour. our shop is in san jose, most of the work is in the fremont / newark area. this is a full time position.

[Mcdome14]

hi guys, im located in garden valley california, if you dont know were that is im about 10 miles from placerville. i have a clean driving record, can pass a background check and a pee test (without studying), im an honest hard worker who needs a job. im un employed due to a business collapse. im currently attending sierra college in rocklin and majoring in marketing/ business

experience in-
Motorcycle, Car,Truck, 4x4 parts sales
customer service in practically every way
Small scale automotive work ( brakes, oil changes, part replacement)
Automotive and motorcycle Diagnostic work
small scale motorcycle motorcycle work( aftermarket part add ons, tire changes, oil changes, valve checks)
wire feed welding
forklift operator
end loader tractor operator
small amount of excavator experience
small engine mechanic
pool cleaning, chemicals..etc
small amount of construction experience ( concrete, framing, window installation, carpentry)

computer skills
40wpm typing ability
fluent in Microsoft programs (except access)


would like to learn-
fabrication
welding
anything automotive or motorcycle



im an open book as to what i can do. i would like to stay in nor cal but if the right job is in the right location i will move. if anyone can help me out that would be amazing. message me on here or my email is crf150rider14@yahoo.com thanks

[bics90xj]

Sacramento Metro Fire is hiring for a mechanic! All the info is on the web site. www.sacmetrofire.ca.gov

[Brad]

http://pirate4x4.com/forum/showthread.php?t=995619

[PsychoticDeadGuy]

Hey guys. Don't really NEED work, but wanted to do some side work, TIG welding. Roseville area. Looking for some small stuff I can do from home. Just looking to make a little cash. Thanks guys.

[Fawk Awph]

Im looking for a job if anyone knows of something. chico area, i have a class A with TX endorsements and a perfect driving record.

give me a call at 530-321-99zero5

thanks,
Callen

[Shaffers Offroad]

Shaffer’s Offroad is looking for a fabricator to join the team!!

If the skills mentioned below describe you, give us a call to set
up a meeting time with Mike.

* Basic mechanics a must
* Fabricating experience preferred
* Flat rate salary based on experience
* Flexible availability
* Team oriented attitude
* Self starter

As mentioned, we are looking for a team oriented person that is willing to
pitch in where needed and take pride in being a team. Not only are a we a
self-made shop that builds custom race cars, buggy’s, and 4wheel drives but, we
also have a successful racing team that is a big part of what we do. We’re
looking forward to finding that person in you!

510-533-5202

[peligroso]

Well add me to the list I was laid off a few months ago here's my resume

_____
Noah C. Hammond
12995 Aurora Dr. San Leandro, CA 94577
Phone: (510) 219-7134

EDUCATION: Graduated High School Island High School, Alameda, CA; May 1998.

WORK EXPERIENCE:

October 2012 – October 2012: T & Y Transportation
Route Delivery Driver

• Delivered freight to stores


June 2012 – September 2012: National Blending Company LLC, Lafayette, CA.
Forklift Operator

• Ran rough terrain forklift loading bags of rubber into hoppers
• Worked in the yard watching mixer to make sure it was functioning correctly
• General maintenance on plant to keep it running
• Help with plant setup

Certifications:
• Class 7 Rough Terrain Forklift Cert

July 1998 - May 2011: Home Depot, San Leandro, CA.
General work through all Departments

• Ran multiple machines to retrieve product for customers - Order picker, Reach lift, Fork lift, Electric pallet jack, Slip Sheet, Man lift
• General maintenance for store reset racking, dropped network data lines, set up or replaced computers, 120 electrical, moved registers

Departments Worked in
Pro Sales Delivery Coordinator Pro desk - Pro Sales Pro desk

Lead Kitchen Designer Kitchen & Bath - Kitchen Designer Kitchen & Bath

Sales specialist Kitchen & Bath - Special Order Sales specialist Millworks

Electrical Sales Associate

TRAINING:
• Data comm.
• Sales 101, 102
• Millworks design system
• Kitchen design system 20/20
• Pro Sales
• MS-DOS store system
• Deliveries Tracking / scheduling system
• Yearly safety training with re certification on all machines

HONORS & AWARDS:
• Sales Associate of the month twice Multiple monthly merit badges for customer service

[hitekredneck]

Hey yall, Just saw this thread n YES! Glad somebody had a bright idea!

If anyone is in the Redding ca area and needing a top notch guy. WELL here I am! Im back in college so need 15-30 part time... ANYTHING! Im a forestry AG major with a mechanic/ welders background! But will do just about anything. PM ME thx jay

[nastynate79]

We are currently accepting applications for a truck repair technician with a welding and fabrication background. This position is for a Diesel Particulate Filter Installer. Should be able to MIG weld mild and stainless steel (not required though), follow blueprints, and be able to lift 75 - 100 pounds at times. This position requires you to stand, bend and use a creeper. You must have your own basic hand tools, a clean driving record, must be able to work well with a small team. Only responses with a resume will be considered. Prior military encouraged to apply.


Please respond to Craigslist add. http://http://sacramento.craigslist....731427739.html

[blazing rockwells]

Originally Posted by blazing rockwells

Here is my resume, i need work as well

Zechariah Ketchum
1727 Cattail Dr
Marysville, CA. 95901
Home: (530) 923-7727
Cell: (530) 216-7753
WORK HISTORY
August 2007-July 2009 Maintenance Mechanic
Sunsweet Growers, Inc.
901 N. Walton Ave
Yuba City, CA 95993
(530) 674-5010
Responsible for maintenance of production equipment.

August 2005-April 2007 Welder/Fabricator
Alpha Explosives
cant say where!
(916) 645-3377
Welding quality magazines for customers. Maintaining yard equipment and service vehicles.

March 2005-August 2005 Belt Splicer
Valley Rubber and Gasket
10182-C Croydon Way
Rancho Cordova, CA. 95827
(916) 369-8885
Responsible for assisting in belt splicing.

January 2003-March 2005 Assistant Manager
Kragen Auto Parts
Marysville, CA. 95901
(530) 749-9052
Responsible for assisting in general management duties including cash drops, and overseeing employees.

EDUCATION
September 2003-June 2004 Yuba Community College
Welding/Hydraulics Courses
Marysville, CA. 95901

September 1998-June 2002 Middletown High School
P.O. Box 338
Middletown, CA. 95461

SKILLS
~Welding/Fabrication
~Mechanics
~Computer Skills
~Advanced Typing
~Quality Customer Service
~Some Management Skills
~Heavy Equipment Operation
~Safety Precautions

Put me back in here, now just ad a year of telecom work

[yotabattlemaiden]

Chris McKelvy
423 Tracy Ave*Santa Rosa,*CA*95401
(707)228-5003
mckelvy.blacktailhunter@gmail.com
Objective
Seeking a position as a fabricator in the off-road industry, that would utilize the skills I've gained in my personal life and through the Chassis Fabrication program at Wyotech.
Skills

WYOTECH, West Sacramento, CA Graduated June 2010
¬Automotive Technology – Core program
¬Concentration in:
• Diploma – Motorsport Chassis Fabrication
• Computer Literate - Familiar with MS Office, AllData, Mitchell On-Demand

Santa Rosa Junior College, Santa Rosa, Ca

·******************************** Basic Machining: Milling and Lathe work. 2008
·******************************** Beginning Welding: Arc and Oxyacetylene Welding. 2006
El Camino High, Rohnert Park, Ca
General Diploma
Areas Of Study
In addition to gaining more knowledge of the areas I have already studied I will learn Diesel mechanics, Body work and more about Suspension design. Other interests include Taxidermy, Gunsmithing, all things Hunting or outdoors, and blacksmithing/blade making.
Work Experience
July 2010-current Willys America Cazadero, Ca
Restoration Technician
2002-09Trader Joes*Santa Rosa, Petaluma, Novato Ca
Cashier, Stocker
2007 Town of Windsor Parks Dept.* Windsor Ca
Seasonal help
2000-02 In N Out Burger*Rohnert Park Ca

Relocation is deffinately an option.

[SIKJEEP]

bump

[earob]

I'm an Enrolled Agent and CPA + MST candidate looking for side jobs during tax season and something steady during summer. I have a BS in Marketing, Certificate in accounting and working on MS in Taxation, mainly for CE. I need to find a CPA to work under to fulfill California pathway 1 sign off. I don't know how many off road enthusiasts CPAs there are out there, but thought I'd give this thread a chance.

[Fawk Awph]

still looking for a driving job around chico.

[Ande]

Anybody need a full time job?

--------------------------------------------------------------------------------

Vacaville, California

We are looking for a journeyman level auto technician for a full time position, this is a great position with a great company, we have been in business for over 30 years, great family atmosphere, lots of benefits and NO WEEKEND WORK!

Here's what we have to offer:

Full Time employment
Clean, well lit shop
The latest diagnostic tools and equipment
Training and classes to keep you up to date
Competitive Pay Plan that includes performance Bonus
Holiday Pay
Vacation Pay
Medical Benefits
Mon-Fri work schedule
Uniforms
check out our company here http://www.motoringspecialists.com/

send us your info here info@motoringspecialists.com

[lowbuck]

POSITION/TITLE: Mechanical Engineer

POSITION SUMMARY:

Plan, manage and design product applications and mechanical maintenance teams. Responsible for organizing highly complex activities for the design, development, implementation, and maintenance of engineering projects.

DESCRIPTION:

Plans and directs all aspects of mechanical engineering activities within an organization. Ensures all mechanical engineering projects, initiatives, and processes are in conformance with organization's established policies and objectives. Oversees the design of products such as engines, instruments, controls, robots, machines, etc. May oversee fabrication, operation, application, installation, and/or repair of mechanical products. Requires a bachelor's degree in engineering and 8 to 10 years of experience in the field. Familiar with a variety of the field's concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals. Performs a variety of tasks. Leads and directs the work of others. A wide degree of creativity and latitude is expected.

RESPONSIBILITIES/DUTIES:

1. Maintain, evaluate, and improve manufacturing methods.
2. Estimate manufacturing production times, staffing requirements, and related costs to provide information for management decisions.
4. Oversee manufacturing process and process optimization.
5. Interface with customers, employees and vendors.

• EDUCATION/EXPERIENCE DESIRED:
• B.S. degree (M.S. preferred) in Mechanical Engineering or related field.
• A minimum of 8 years of related experience
• Experience with Lean Manufacturing or Six Sigma
• Knowledge in large metal shredding operations
• Alan Bradley PLCs
• V-cad systems
• Hydraulics and Accumulators
• Ferris & Non-Ferris separation process
• Vibration tables
• Air table & Air knives separation
• X-ray and Optical Tech
• Welding.
• PM & Tooling systems

MUST BE WILLING TO TRAVEL




• Location: Fresno CA
• Compensation: Full-Time Position, Medical, Dental, 401K


pm me if interested

[ssic off road shop]

Originally Posted by markaplet

My addiction to rockcrawling is effecting my pocket book in a serious way. So I thought I would try and pimp my skills out for either paid work, or in trade for parts that I need for my project.

What I can offer you

Photography and videography services. Let's face it we all want sick footage or photos of us in our rigs hitting some gnarly trails or courses. I know I sure do... How about High Definition?! Yeah I got the cool kids toys for this sort of thing. If your a Nor Cal team, or fab shop I would love to show you what I can do for you. I am willing to travel to your events or trips with gear to be your dedicated photographer/videographer.

I also have full editing capability. I can integrate any existing footage that you already have. Talk about a kick ass way of showing off your team/fabshop/personal rig.

Web Design & Development. I have been working as a professional web designer/web developer for about 12 years now and I really know my stuff. I can put together full sites from basic personal sites that show off your rig or trail stories to family and friends, to full blown e-commerce sites. If you have a website already but need it upgraded, or updated I can do that too. This extends to product photography if you need it. I have a studio space with lights and all the extras.

Graphic Design. Need brochures, business cards, logos, decals, fliers, or other types of promo items for your team or fab shop then I am at your service. I have been doing print design for just as long as I have been doing web design.

In a nutshell, I can handle anything creative that you need. And I love this sport so you know your getting someone dedicated to making you look good.

What I Am Looking For
Besides cash as the obvious item, I am looking for parts to upgrade my project crawler or start a new one. So if you have some extra parts and interested in trading, then PM me with your requests.

I am most interested in moving into a 4 seater buggy project.

References
Here are a few links for references that show my skills.

http://www.pagedesigngroup.com <--- My current employer site with some print, web, and video samples from my professional clientele

http://www.visual28.com <--- Web design portfolio on my personal site.


http://www.youtube.com/visual28 <--- Mostly family home videos that I have done just for fun.

http://www.flickr.com/photos/visual28/sets/ <--- A bunch of photos of mine on flicker. A few wheeling trips, some family photos, and other randomness. Whats not posted there is my professional work as a lot of it has copyrights and I cannot post it to flickr.

bump for Mark, way cool guy and gets the job done well

[shoener tod]

Hey guys put me on the list. Im looking to try and get into a shop welding fabrication and/or working with tools and building stuff. Currently going to school to get my welding cert as well as a design cert and then hopefully back to finish my BA in mechanical engineering. Here is my current resume. My experience is mostly in the computer field as an engineering technician. I also have experience as an electrician, driver, warehouse work and customer service.


Michael Allen Johnson
4944 Pine Nut Way (916) 400-1253
Sacramento, CA 95838 Schonertod@gmail.com

Objective
To obtain a challenging, growth oriented position in a design/manufacturing field.

Skills

• Experienced in Building and troubleshooting PCs down to the board level.
• Knowledgeable in C++, Visual Basics and Auto Cad
• Experienced in reading schematics and blueprints
• Proficient in Microsoft Office applications

• Able to utilize Oscilloscopes, DMMs, Power supplies, base stations and other testing equipment
• Exceptional soldering skills
• Over 6 years experience in customer services
• Self-motivated and a very fast learner
Education
Associate of Science, Computer and Electronics Engineering Technology
ITT Technical Institute, Rancho Cordova, CA Graduated: September 2008

Associate of Science, Computer Network Systems
ITT Technical Institute, Rancho Cordova, CA Graduated: December 2005

Work Experience
09/19/2011 – 01/06/2012 Abacas/Intel Corp. Folsom, CA
Engineering Technician
• Built testing infrastructures and maintained ghost images for future testing.
• Installed OS ranging from Windows XP-2008 server, and Linux RHEL
• Debugged and tested software tools and submitted error reports for future releases.
• Maintained/upgraded system/server hardware for client testing.

10/04/2010- 09/16/2011 Tyco Electronics West Sacramento, CA
Engineering/ programming Technician
• Writing Automation Programs using Visual Basics.
• Running execution tests, and tracking data with a custom application.
• Minor design work creating tester load boards.
• Creating Custom Test boards for hand testing and debugging automation testing.
• Debugging Automation testing Hardware.

03/14/2006- 10/01/2010 Kelly Services Rancho Cordova, CA
Engineering Technician
• Set up, tested and maintained thermal testing equipment.
• Ran execution tests, and tracked data with excel spreadsheets.
• Setup, reworked and tested boards for automation testing.
• Maintained test equipment and trained others on how to operate them.
Kept all systems updated with new patches, bios, and system applications.

[InfamousMetalWorks]

Hey guys I own infamous metal works (www.infamousmetalworks.com). We are located in the bayarea near san jose. Im looking for a fabricator/welder, must be a very capable and knowledgeable welder. If you can weld, Tig and Mig, I can help you fine tune your fabrication skills. We are making some changes and I have less time than ever in the shop.

We specialize in:
rock crawlers
pro mods
desert race vehicles
pre-runners
custom designed IFS or Solid axle suspensions
retro-fitting solid axle to IFS swaps. or vise-versa.
tubing bending
sheet metal and forming
cnc palsma cutting.

What we can offer:

Pay Rate is negotiable based on experience and speed at which you turn over jobs after you start. Full time and/or part time position available. Starting at $20/hr.

If you have the skills above, you know that custom work has no preset hours. You will be paid by the billable hour. Would prefer that you have your own tools. You will be responsible for those tools.

Be an honest person, with a strong work ethic and ability to work under deadline pressures.

Send list of experience and/or resume to joseph@infamousmetalworks.com.

Check out our website for examples of what we do on a routine basis and our facebook site for recent builds and activities. Also Check our facebook (use button below) for most up to date info!


Thanks Joey

[blazing rockwells]

Any of you guys find anything decent for work, im probally going to have to trade or sell my 72 so i can go even futher out of town for decent work

[shoener tod]

I feel ya. i have already sold my f150 that i was going to turn into a welding rig. My bike and if things dont start turning around im gonna have to sell my jeep.

[lowbuck]

Application Developer
Job Title: Application Developer
Information Systems
Reports to: Manager of IS
Salary Grade/Band: DOE
Job Summary

Under general direction, provides support through the design, development, implementation and maintenance of , websites and other Databases. Develop and maintains company-wide Intranet, allowing data manipulation for each internal staff member, including production data real time reporting. Develop and maintain external Web portals allowing users to input and retrieve accurate information.

Duties, Functions and Responsibilities

(The following duties are illustrative and not exhaustive. The omission of specific statements of duties does not exclude them from the position if the work is similar, related or a logical assignment to the position)

1. Work with Manager of IS to plan new applications, code updates and enhancements.
2. Write, test and deploy application updates and patches.
3. Stay up to date on the latest technologies and find ways to integrate those relevant into ERI's current and future software suites.
4. Create and modify Crystal Reports to meet the ever changing needs of ERI.
5. Provide support to both technical and non-technical staff relating to a program, database or other IT issues when additional help is required.
6. Occasionally meet with ERI staff to define requirements for updates or patches.
7. Performs related work as required.

Minimum Qualifications:

1. BS in Computer Science or related field, or equivalent experience.
2. Minimum 3 years' experience in the application development industry.
3. A solid understanding of common programming models and workflow defined as follows:
a. Object Oriented Programming
b. Model -- View -- Controller Framework
c. Web Hosting with Windows Servers and IIS
4. Ability to articulate effectively in both oral and written form.
5. Any combination of education and/or work experience may substitute for minimum qualifications.
6. Experience as described, can be substituted on a year-for-year basis for the required college education.
7. Vocational/technical school or accredited community college in information technology (excluding data entry)

Skills

A successful candidate must be proficient with the following types of hardware, software and programming languages.

1. Windows Server 2003/2008 with IIS 6 and 7.
2. .Net Framework, ASP.Net, VB.Net/C#, PHP, XHTML, CSS, Javascript and the jQuery library, SQL, ADO.Net.
3. Visual Studio 2005/2010, Crystal Reports, Visual Source Safe, SQL Server 2005/2008 and MySQL.
4. Microsoft Office Suite, Mozilla Firefox, Google Chrome, Internet Explorer and Windows Operating Systems.





Competency

To perform the job successfully, an individual must demonstrate the following competencies.

1. Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions.
2. Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings.
3. Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information
4. Change Management - Develops workable implementation plans; Communicates changes effectively.
5. Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness
6. Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; supports organization's goals and values.
7. Strategic Thinking - Develops strategies to achieve organizational goals; Adapts strategy to changing conditions.
8. Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions.
9. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently.
10. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.
11. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality.
12. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly.
13. Safety and Security - Observes safety and security procedures; Uses equipment and materials properly.
14. Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
15. Attendance/Punctuality - Is consistently at work and on time.
16. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments.

Physical Demands and Working Conditions

Typically sit at a desk or table; Regularly walk, stand, or stoop; occasionally lift, carry, push, pull or otherwise move objects weighing up to 60 pounds; occasionally drives a motor vehicle; Work for sustained periods of time maintaining concentrated attention to detail; and Need to distinguish between shades of color. Accommodation may be made for some of these physical demands for otherwise qualified individuals who require and request such accommodation.

Work is performed in environmentally controlled and partially environmentally controlled rooms; and Work may be performed in a very noisy place.

This description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty.


• Location: Fresno CA


Hit me up if interested via PM or if you need more info.

Jason

[rockcrawln]

Senior Mechanical Engineer - Ukiah, California

Mendocino Forest Products Company, LLC (MFP), is a leading supplier of sustainable forest products. We are seeking a qualified candidate to work as a Senior Mechanical Engineer in Ukiah, California. This position will strive to increase profits, safety and quality by improving all phases of machine design, process improvement, and equipment analysis at Mendocino Forest Products and Humboldt Redwood Company Operations. Oversee application of Manufacturing Engineering procedures and programs. Create concept and mechanical designs, provide project cost estimates, perform vendor selection, and generate sound financial justification. Responsible for all phases of project proposals as well as implementation management.

ESSENTIAL DUTIES AND RESPONSIBILITIES include, but are not limited to the following. Additional duties will be assigned.
•Subject matter expert (SME) in equipment design and fabrication process;
•Active in recommendation for best practices and use of technology;
•Teamwork with Industrial Engineers, Operations Management and Operators;
•Generate mechanical designs including specifications and requirements;
•Guide vendors on material selection and fabrication processes;
•Coordinate and design mechanical and electrical interfaces and controls with Electrical Engineers and Electricians;
•Teamwork with maintenance group in data driven root cause analysis and equipment improvements;
•Mentor other technical staff in their professional development;
•Execute pilot and production release of equipment projects;
•Design, develop, implement and improve integrated systems that include people, materials, information, equipment and costs;
•Work independently and as part of a team in order to achieve project deliverables and milestone deadlines;
•Lead equipment/process troubleshooting and root cause analysis effort;
•Effective oral, written and interpersonal skills.

QUALIFICATIONS
To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Must maintain and carry a valid California driver license and remain eligible and capable of operating company vehicles in accordance with company policy guidelines.

EDUCATION and/or EXPERIENCE
Minimum five years experience in Mechanical Engineering or related engineering field in a sawmill environment. Bachelor of Science degree (B. S.), in Mechanical Engineering or other related engineering field is preferred. Experience with successfully leading a minimum of one major capital improvement project. Experience with pneumatic, hydraulic, electrical controls, machine and machine control design. Six Sigma, Continuous Improvement and/or Lean Manufacturing knowledge and experience is a plus.

TRAVEL REQUIREMENTS
The travel requirements described here are representative of those an employee encounters while performing the essential functions of this position.

Occasional travel to other company owned sites as well as vendor sites will be required.

COMPUTER SKILLS
To perform this position successfully, this individual must have advanced skill levels with Microsoft Office products. Intermediate to advanced skill level with CAD and 3 D Modeling software (Solid Works preferred). Facility Layout and Process Flow Mapping is a plus.

APPLICATION PROCESS
Interested applicants should submit a letter of interest and a current resume with salary history.

We offer a competitive compensation package, including medical, dental, life, disability, pretax flexible spending account, 401K, EAP, vacation, paid holidays and a discretionary bonus program.

MENDOCINO FOREST PRODUCTS COMPANY, LLC DOES NOT ACCEPT UNSOLICITED RESUMES/APPLICATIONS.
MENDOCINO FOREST PRODUCTS COMPANY, LLC IS AN EQUAL OPPORTUNITY EMPLOYER / ADA / DRUG FREE WORKPLACE.

[Freshman]

We are a sign shop in Santa Rosa looking for a Prepper/shop helper. Dutys include sanding aluminum, bondo, helping out were ever needed as we are a fab shop, shop clean up, helping with installs. Pretty good gig just need to show up on time every day, work well with others and work some OT now and again. Pay is going to be around $12 to $14hr. Normal work hours are 6:30 to 3. Steady work. Email me if interested.



Eric
e.wehrer@scottag.com