Northwest Forsale, Trade, and Wanted.

[Funkyfreshmp]

dual axle flat bed. 16' long 6' wide deck, wired with lights, has trailer brakes but not wired up, on ford 5lug with good tires. needs fenders and new jack stand.

$900

spanaway washington

[shrek tits]

1 3/4" .134 wall dom rollcage. All professionally tig welded. Has T6 1/8" aluminum lid. Seat belts mounts and seats bolt to the roll cage also comes with seat sliders that are attached to the cage. Rollcage has plates with bolt holes on all the feet to mount to body. Seats and belts not included for asking price. I will even throw in the spare tire mount that bolts to the cage. Fits jeep cj7 or yj wrangler. Not sure if it will fit a factory top never tried lets pretend it wont. Asking $650 obo For more info call (360)324-2588 thanks Brandon.Located in Centralia W.A

[scrappydoo]

I am after a set of drive shafts for my 78 k20 long box. Th400 and np205.

[toyoturd]

Originally Posted by red_man22

Then you can sell yours at that price, and someone can shoot me an offer on mine and see what happens. As a seller I'm gong to start little high and I can always go down but nobody ever offers a higher price then you are asking. Right?

i cant get anyone to want a manual box so i strip them and use as a drill template for moving box forward

glws though. if people desire these for some crazy reason i can start supplying them i guess

[osmtdi2000]

http://www.pirate4x4.com/forum/showt...916&highlight=
http://kpr.craigslist.org/pts/3143464671.html


thanks

[Coopie]

Set of Four 285/70R17 BFG All Terrains $500 OBO:
http://portland.craigslist.org/mlt/pts/3148810597.html

PM me for fastest response if interested
See pics in the craigslist ads

[carnuck]

My IH stuff in Lynnwood

http://www.pirate4x4.com/forum/showp...&postcount=367

[4Xjunkie96]

Looking for the popular 78-79 Ford Dana 60 front with 4.10's. Willing to drive to Seattle, Portland, or Yakima. Much farther just wouldn't be worth the money in gas and further worn IFS. Its getting bad enough as is.

[ceb0217]

I have 4 33/12.50/15 bfg at they have about 85% tread left or more. I got them for a jeep but then went with a diffrent tire. $ 600

[Blaze Sr.]

1983 Chevy K5 Blazer ******part out?????******
If I had enough shout outs for the big stuff, parting out could be an option. Any requests??????

Front end: Dana 60, Yukon 5:13s, detroit, Yukon 35 spline outers, Poly Drive flanges, Solid diff cover.
Rear end: Corp 14, Yukon 5:13s, Ouverson mini spool, disc brake conversion, Solid diff cover.
Suspension: Front-52" spring swap. Rear-SKY's shackle flip and 56" springs. 2" body lift. Custom shock hoops with 16" procomp white bodys F/R
Engine: Lt1 from a 1995 Caprise 85k, harness was done by LT1wiring
Trans: TH400 w/ ArtCarr shifter, tranny cooler w/ gauge.
T-Case: 203/205 doubler w/ offroad design adapter and triple sticks.
Drivelines: Front-Custom long travel square tube cv shaft. Rear 1410 HAD thick wall shaft.
Winch: 10k Viper: wireless, cable, and hard wired.
Body: Cut, pinched, bobbed, and beat up .
Steering: Skys crossover, tie rod behind axle, PSC ram assist kit including box, off road design steering box brace and repair kit.
Tires: 42x15x15 TSLs cut
Wheels: 15x8 DIY beadlocks
Cage: 1 3/4 .120 (8 point)
Fuel Cell: Summit Racing 16gal.
Battery: Optima red top, ballistic box.



K5 crawler For Sale - YouTube (walk around)
jonesin' junipers n june - YouTube (crawling)
Roman Numeral III - YouTube (crawling)
Sandsation - YouTube (sand)




$8500

Custom Built almost flat car trailer, buit for this truck.
16ft, fold down ramps, electric brakes, 3500k axles, 10k springs, clear lights, sideboards,

Flat bed car trailer for sale - YouTube (walk around)
$2000

If you take both $10,000

Email, PM, or call 503-580-4984 for more info, Thanks Ryan
ryebook@comcast.net
Salem, OR 97303

[PacificNWestJeeper]

PM me if interested in any of the below:

FOR SALE


====
KILBY High Clearance Skid plate
Fits all TJ 1997-2006 including the Unlimited.
This Gas Tank Skid Plate offers excellent protection for the Jeep TJ. This skid was built from 3/16" steel plate in 3 pieces that were laser cut, formed and welded together. It utilizes the stock mounting locations to keep the installation time to a minimum. You will not use the stock tin shield as part of this skid.
The TJ skid has been moved to the passenger side by 3/4" to allow for more shock clearance on the driver side and it raises the tank up another 1" for increased clearance over stock setups and even more vs. other skids that go over the stock shield. The rear of the skid has a departure angle built in to aid in sliding over obstacles. The front has a new design allowing 3/4" more differential clearance over the previous design. Four drain holes are incorporated into the design and the factory straps are used to secure the tank to the skid. More material has been removed from the front of the skid to give the track bar more room to cycle.
This skid will fit 1997-2002 TJ's without a body lift with slight modification to the tank straps. 2003-06 Wranglers will require a 1" body lift due to the new changes.
At 60 lbs each, this skid is no lightweight!
This item is used but in great shape and powder coated black.
These Kilby skid retail for $280.00. I no longer need this and will part with it for $190.00 (firm on price).

====
JKS 1 inch motor mount lifts (Part # 8100) for 1987 to 2006 Jeep wranglers.
Ideal for Jeep owners who want the benefits of raised motor mounts without replacing the OE soft rubber isolating bushings, our 1" Budget Motor Mounts utilize a simple spacer design that raises the original motor mounts.
JKS 1" Budget Motor Mounts are manufactured from premium T061-T6 aluminum alloy, and anodized red to create an impermeable, protective coating. High quality, zinc-plated fasteners are supplied for outstanding corrosion resistance.
These improve your drivetrain ground clearance and improves your rear drive shaft angle.
These are used but in perfect condition, comes with all hardware.
These retail for $80.00.
I am asking $40.00 (firm on price)

====
I am selling my SPINTECH 9000 series muffler 2 inch. I have had it for less than a year and will no longer be able to use it with my motor swap.
This muffler is in great shape. These retail for around $90.00.
I am selling this for $40.00 (firm on price)

====
05 - 06 TJ gas tank $75.00
====
97 - 06 TJ brake and clutch assembly $15.00

[cslimfu]

Mcminnville, I have a rebuilt( zero miles) 700r4 I bought from wyjax on here a year ago. There is no T case but the adapter is there. My build has changed directions and I don't need it now. He had it built to go behind a 500 horse 427 so, it has been outfitted with kevlar, bearings, valve body, lock up converter ( 2400 ish stall) to accomodate. I took the pan off and took these pics a few weeks ago. I want it gone, $750 PM me on here.

[RcBro]

Anyone got a 3rz power steering pump laying around within an hour of Salem?

[go4petee]

I need a 36", 37" or 38" on an 8lug rim. just need a spare

or

a 8 lug 16.5" rim

[RichG]

Anyone want to do some horsetrading? I'm looking for a set of decent or better 33" or 35" AT's or MT's for 15" wheels. I've got lots of odds and ends, and some parts laying around here (just not a whole lot of cash, unfortunately )

[whiterunner27]

Got two 38x12.50 16.5 super swamper sx tires on 12 bolt hmmwv rims. $500


SOLD

[wheelingyota]

I looking for a cj2a tube with title I like complete with hood, fenders, and windshield. If there's more like frame even better close to se Portland will travel up to 1.5 hours one way. Parted out my buggy chassis and have all drivetrain. Pm with info and price please.

[Blaze Sr.]

New price. Come on down. $7,900

[obscene23]

Cleaning out my shop I have two ford edelbrock performer intakes used but still in good condition $100 each, a ford four speed manual transmission with transfercase it was mated to a small block $200. a divorced 205 out of a 70s dodge pickup $200. And finally a dodge 318/360 edelbrock performer intake used but all cleaned and sand blasted $150. Everything is obo i just want it gone not gonna use the stuff. location Moses Lake

[Valley Rock]

WTB. Looking for Dana 300, drivers drop, preferably with levers, 23 spline for behind AX-15 or AW4 Jeeps trans . THAT, would be ideal, if you have something close, hit me up . Have piles of XJ Cherokee parts available . Located near Medford Oregon (Southern OR)

[Y5mgisi]

Im looking for a set of rally wheels like these with caps and rings for $100 or less.

[Chaps]

I'm lookin for an AX15 preferably post 94'. Also lookin for an ECM for a 93' manual trans jeep cherokee. let me know what you have. Thanks.

[Y5mgisi]

Well this thread worked out great for me!!! A cool dude on here PM'ed me and told me he had a set of rallys for sale for $50!

These,




To go on my C10!

http://i597.photobucket.com/albums/t...p/SAM_2166.jpg


Thanks again!

[cslimfu]

Mcminnville, Looking for a total of 4, 35x12.5r16, A/T ok, mud better but whatever for cheap. Need to have the same tread per axle. They do need to be a little better then just rollers, kinda get by tires.

[toyoturd]

97 dist 2rz swap complete 157k has accessories harness ecu maf k&n bell starter clutch flywheel. No need to resistor mod tach 800.00 obo

Turbo bell housing and fork connect 22r/re to v6 tranny 150.00 firm

L52 just needs pocket bearing make offer

Located in eagle creek or 97022