Looking for someone in Phoenix area to make D60 Truss - Pirate4x4.Com : 4x4 and Off-Road Forum

ChicagoDII · 05-04-2008, 09:02 PM

I need to get a truss for my front 60 and rear Sterling 10.5. Both of them need to be very low profile and tight against the housing. Something like 3/8" flat plate bent to fit around the diff and plasma cut at the ends to fit on the axle tube. Then I need the front welded to the diff housing. So if you've got a break press, and are experienced with welding to nodular iron, PM me if you want to make some cash.

ElLizard · 05-05-2008, 09:48 AM

Is desert fab out of the question?

ChicagoDII · 05-05-2008, 10:43 AM

Quote:

Originally Posted by ElLizard

Is desert fab out of the question?

Desertfab is the reason I am broke and am trying to find someone on here who has the tools and wants some extra cash.

mongosd2 · 05-06-2008, 05:40 AM

if you had a sack, you'd call'm and see if they are interested in making right from the last swap

give Aaron a call, he may know someone...

el ranger loco · 05-06-2008, 11:48 AM

LostOffroad. PM him for find him
here VVV

Symon623 · 05-06-2008, 12:57 PM

Depending on time frame, I could do it. Or check with Complete Offroad on the west side.

SHNIPE · 05-06-2008, 05:00 PM

I can vouch for sy. His welds will hold

lancetkenyon · 05-06-2008, 08:13 PM

Quote:

Originally Posted by SHNIPE

I can vouch for sy. His welds will hold

And look nice too.......

05-04-2008, 09:02 PM	#1 (permalink)
ChicagoDII Registered User Join Date: Sep 2005 Member # 53314 Posts: 293	Looking for someone in Phoenix area to make D60 Truss I need to get a truss for my front 60 and rear Sterling 10.5. Both of them need to be very low profile and tight against the housing. Something like 3/8" flat plate bent to fit around the diff and plasma cut at the ends to fit on the axle tube. Then I need the front welded to the diff housing. So if you've got a break press, and are experienced with welding to nodular iron, PM me if you want to make some cash.

05-05-2008, 09:48 AM	#2 (permalink)
ElLizard Registered User Join Date: Jun 2007 Member # 93719 Location: Southern New Mexico Posts: 397	Is desert fab out of the question? __________________ ╭∩╮(︶︿︶)╭∩╮

05-06-2008, 05:40 AM	#4 (permalink)
mongosd2 Granite Guru Join Date: Jan 2003 Member # 16003 Location: Moved to Tucson... Posts: 938	if you had a sack, you'd call'm and see if they are interested in making right from the last swap give Aaron a call, he may know someone... __________________ 2001 D2 FZJ80 Front/ARB Ruffstuff axle housing rear w/ fjzj80 stuff, Detroit, 37" creepy's, 14" 9100 Coilovers (F) 14" FOA coilovers (R) 1.6 lt230 w/Ashcroft Under Drive PSC hydro steering Hellfire Hi Steer Knuckles...a lot of revisions and a lot of weldin' 1983 110 RHD Pick-up

05-06-2008, 11:48 AM	#5 (permalink)
el ranger loco Fuck a police chase Join Date: Sep 2003 Member # 23035 Location: East Mesa, ARIZONA Posts: 1,175	LostOffroad. PM him for find him here VVV __________________ Kyle Prettyman AzUndertakers Last edited by el ranger loco; 05-06-2008 at 11:48 AM.

05-06-2008, 12:57 PM	#6 (permalink)
Symon623 Wheelin a Toy HYBRID Join Date: Aug 2005 Member # 51266 Location: Peoria AZ Posts: 884	Depending on time frame, I could do it. Or check with Complete Offroad on the west side. __________________ Sy 85 Syota - 6.0/700r4/203/300/60's/§XX§ 02 Cummins tow beast - a few goodies 06 Yamaha FZ1 - commuter High Country Renegades

05-06-2008, 05:00 PM	#7 (permalink)
SHNIPE Registered User Join Date: Dec 2004 Member # 40082 Location: Scottsdale, AZ Posts: 302	I can vouch for sy. His welds will hold __________________ Dennis If you soaked up all you can... get a new sponge cause theres more to learn!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode