Kind of at a cross roads right now and was going to put this out there.
77 CJ7 frame modified with custom cage (all 1.75 and 1.5 dom), YJ tub in rough shape with CJ hood and grill.
Drivetrain
AMC 360 bored 30 over and had aftermarket cam installed before I purchased it, edelbrock performer intake, edelbrock shorty headers, holley 670 truck avenger, HEI dizzy, bulltear ultimate oil pump kit with remote filters, holley red electric fuel pump
Ford T18 with novak adapter’s jeep 23 spline kit installed
Atlas 3.8 to 1 pass drop, 32 spline outputs, 1410 yolks, cable shifters TMR rear output support installed
Front Chevy kingpin Dana 60 stock 4.10 gears, welded, 10 factory 35 spline chromo inners and outers, rock and roll off road drive flanges, ruffstuff cover, 1350 yolk
Rear 14 bolt stock 4.10 gears, welded, GL off road disc brake brackets, solid cover, ruffstuff pinion guard, 1350 yolk
Suspension
Front 3 link with track bar and rear single triangulated 4 link
Lowers are 3/8 wall dom with 1.25 ruffstuff heims and uppers are 1/4 wall dom with 7/8 heims
Front and rear has King 2.5 in remote res coil overs with shaft bumps installed (Rear 16 in and front 14 in travel)
Rear has Currie antirock sway bar with aluminum arms
Steering system
PSC 9.7 orbital valve (About 2 turns lock to lock)
KRC cast iron pump with -12 feed and -8 return
PSC new style res with filter inside
PSC steering wheel with quick release
Derale cooler with fan mounted in rear
Surplus center 2x8 single ended clevis ram
¼ wall dom tierod with 7/8 heims attached to stock chevy knuckles
Other Stuff
4 – 39.5 in TSLs mounted on re centered h1s (like new tread, one side wall has been vulcanized)
1 – 39.5 in TSL spare mounted on re centered h1
PRP super comp high back seats
Crow 5 point harnesses
Autometer gauges
Whelen Siren
PCI race air pumper
Door skins and window nets if interested in racing Line MT.
Aluminum radiator and new contour fans
Lots of spare parts
As of right now the radiator has to be re mounted and also the grill and it would be useable once again. I have a new hood to install also that needs trimmed and painted. I could take care of that before it gets sold. A couple things it needs to be 100 percent are a new skid plate, new front drive shaft (current one is dented but works fine), 2 of the lower links are tweaked a little but they still work fine. I also have a bunch of spare parts I could send with this rig.
I’m sure I missed a bunch but if anyone has any questions ask away. Located in Harleysville PA 19438. 8,000 obo. Pics to follow
Thanks Mike
77 CJ7 frame modified with custom cage (all 1.75 and 1.5 dom), YJ tub in rough shape with CJ hood and grill.
Drivetrain
AMC 360 bored 30 over and had aftermarket cam installed before I purchased it, edelbrock performer intake, edelbrock shorty headers, holley 670 truck avenger, HEI dizzy, bulltear ultimate oil pump kit with remote filters, holley red electric fuel pump
Ford T18 with novak adapter’s jeep 23 spline kit installed
Atlas 3.8 to 1 pass drop, 32 spline outputs, 1410 yolks, cable shifters TMR rear output support installed
Front Chevy kingpin Dana 60 stock 4.10 gears, welded, 10 factory 35 spline chromo inners and outers, rock and roll off road drive flanges, ruffstuff cover, 1350 yolk
Rear 14 bolt stock 4.10 gears, welded, GL off road disc brake brackets, solid cover, ruffstuff pinion guard, 1350 yolk
Suspension
Front 3 link with track bar and rear single triangulated 4 link
Lowers are 3/8 wall dom with 1.25 ruffstuff heims and uppers are 1/4 wall dom with 7/8 heims
Front and rear has King 2.5 in remote res coil overs with shaft bumps installed (Rear 16 in and front 14 in travel)
Rear has Currie antirock sway bar with aluminum arms
Steering system
PSC 9.7 orbital valve (About 2 turns lock to lock)
KRC cast iron pump with -12 feed and -8 return
PSC new style res with filter inside
PSC steering wheel with quick release
Derale cooler with fan mounted in rear
Surplus center 2x8 single ended clevis ram
¼ wall dom tierod with 7/8 heims attached to stock chevy knuckles
Other Stuff
4 – 39.5 in TSLs mounted on re centered h1s (like new tread, one side wall has been vulcanized)
1 – 39.5 in TSL spare mounted on re centered h1
PRP super comp high back seats
Crow 5 point harnesses
Autometer gauges
Whelen Siren
PCI race air pumper
Door skins and window nets if interested in racing Line MT.
Aluminum radiator and new contour fans
Lots of spare parts
As of right now the radiator has to be re mounted and also the grill and it would be useable once again. I have a new hood to install also that needs trimmed and painted. I could take care of that before it gets sold. A couple things it needs to be 100 percent are a new skid plate, new front drive shaft (current one is dented but works fine), 2 of the lower links are tweaked a little but they still work fine. I also have a bunch of spare parts I could send with this rig.
I’m sure I missed a bunch but if anyone has any questions ask away. Located in Harleysville PA 19438. 8,000 obo. Pics to follow
Thanks Mike