94 Toyota - Pirate4x4.Com : 4x4 and Off-Road Forum

ladywolf · 06-05-2004, 03:09 PM

1994 Toyota pickup std cab

I built her up intending to keep her for a long time, so she's had a lot of tender loving care and work put into her. In the last two years, probably more than $20,000 in parts and labor (not including mine or friends) put into her, and she's working great. Walks over rocks like they aren't there new (audience gave me a 10 on the Gatekeeper on my way out of the con). But I'm moving, so I can't keep her

Asking $8,500 obo, in San Luis Obispo, CA.

*What she's got:
SAS with an 85 front axle
Longfields
Crossover hi steer
4 inch lift
All pro long travel springs in front
Skyjacker add-a-leafs in the back
35 inch boggers on 15x10
1.5 inch wheel spacers in front
front diff armour
4.88 gears
full detroit lockers front and rear
dual case, 4.7 in the back and 2.28 in the front, Advance Adapters kit
~215:1 final crawl ratio
square front driveshaft using 1/4 inch steel
retubed 0.90 rear driveshaft
sliders (1/4 inch) and tube bumpers (3/8 inch) with D ring attach points
bobbed bed (minus ~14 inches)
cut fenders
Recently replaced timing chain (professionally done) with aftermarket metal timing guides
no mechanical issues (always starts up just fine for me unless I don't drive her for a month then she'll need a jump, and even then, that's all she needs)
no leaks, engine or otherwise (relatively recently rebuilt front axle)
Relatively new stereo

*Things wrong with her (or things you'd probably want to upgrade):
Some body damage, mostly on the passenger side (nothing that restricts her though)
Passenger side window won't roll up all the way (but it will roll down)
No roll cage (been meaning to do this when I got cash, but... well, I'm moving and I can't take her with me)
steering wheel is upside down (I know, easy fix but I've been lazy)
Square front driveshaft (some people think its ghetto, but it's worked fabulously for me so long as I don't drive over 45 mph)
Ubolt flip kit in the rear (been meaning to do this too, but I lost the part and I've been lazy)

Here's one picture of it in the parking lot...

More pictures are on this page:
http://www.csc.calpoly.edu/~jtantivo/truck/truck.html

SeaBass44 · 06-05-2004, 07:21 PM

bump, easy to get $20k into a rig

Christman · 06-05-2004, 07:33 PM

Thats pretty nice. How many miles on it?

ladywolf · 06-06-2004, 08:43 PM

about 132000 miles. She runs greats.

bosco · 06-08-2004, 10:34 AM

Nice rig man! Wish I was back in SLO so I could take it off of your hands. Bump for ya!

ladywolf · 06-14-2004, 04:27 PM

Thanks for the bumps, but is anyone interested? I'm willing to consider offers.

ladywolf · 07-18-2004, 12:03 PM

ttt

shamb · 07-18-2004, 12:43 PM

lol... i've got 5000 cash?

worth a try right? lol... no one else seems to be steppin up to this killer rig.

ladywolf · 08-12-2004, 10:05 PM

Sorry, I went on vacation then started my new job and forgot to check back on the board for a while. Oops.

Still interested in the toyota?

ladywolf · 08-31-2004, 09:36 PM

Ok, one last try, otherwise I'm gonna have to stick her on ebay, I need her off my hands. $6500 anyone?

e-hills4x4 · 09-01-2004, 12:43 AM

ill be down there this weekend can you pm me a number i can reach you at

06-05-2004, 03:09 PM	#1 (permalink)
ladywolf Registered User Join Date: Oct 2002 Member # 14268 Location: San Luis Obispo, CA Posts: 20	94 Toyota crawler for sale 1994 Toyota pickup std cab I built her up intending to keep her for a long time, so she's had a lot of tender loving care and work put into her. In the last two years, probably more than $20,000 in parts and labor (not including mine or friends) put into her, and she's working great. Walks over rocks like they aren't there new (audience gave me a 10 on the Gatekeeper on my way out of the con). But I'm moving, so I can't keep her Asking $8,500 obo, in San Luis Obispo, CA. What she's got: SAS with an 85 front axle Longfields Crossover hi steer 4 inch lift All pro long travel springs in front Skyjacker add-a-leafs in the back 35 inch boggers on 15x10 1.5 inch wheel spacers in front front diff armour 4.88 gears full detroit lockers front and rear dual case, 4.7 in the back and 2.28 in the front, Advance Adapters kit ~215:1 final crawl ratio square front driveshaft using 1/4 inch steel retubed 0.90 rear driveshaft sliders (1/4 inch) and tube bumpers (3/8 inch) with D ring attach points bobbed bed (minus ~14 inches) cut fenders Recently replaced timing chain (professionally done) with aftermarket metal timing guides no mechanical issues (always starts up just fine for me unless I don't drive her for a month then she'll need a jump, and even then, that's all she needs) no leaks, engine or otherwise (relatively recently rebuilt front axle) Relatively new stereo Things wrong with her (or things you'd probably want to upgrade): Some body damage, mostly on the passenger side (nothing that restricts her though) Passenger side window won't roll up all the way (but it will roll down) No roll cage (been meaning to do this when I got cash, but... well, I'm moving and I can't take her with me) steering wheel is upside down (I know, easy fix but I've been lazy) Square front driveshaft (some people think its ghetto, but it's worked fabulously for me so long as I don't drive over 45 mph) Ubolt flip kit in the rear (been meaning to do this too, but I lost the part and I've been lazy) Here's one picture of it in the parking lot... More pictures are on this page: http://www.csc.calpoly.edu/~jtantivo/truck/truck.html __________________ Who says you can't be a lady and wheel? Last edited by ladywolf; 06-07-2004 at 03:19 PM.

06-05-2004, 07:21 PM	#2 (permalink)
SeaBass44 www.12voltguy.com Join Date: Feb 2000 Member # 40 Location: 80 miles n-sac in Oroville, CA Posts: 30,707	bump, easy to get $20k into a rig __________________ 12voltguy info@12voltguy.com--davezoffroadperformance.com # 530.532.4529 TTC 2010 1989 BRONCO -Awesome web development for your business. www.mudnworks.com mud@mudnworks.com Pat's W I D E TOYOTA Front Axle --07 KTM 450XC----with "stuff"

06-06-2004, 08:43 PM	#4 (permalink)
ladywolf Registered User Join Date: Oct 2002 Member # 14268 Location: San Luis Obispo, CA Posts: 20	about 132000 miles. She runs greats. __________________ Who says you can't be a lady and wheel?

06-08-2004, 10:34 AM	#5 (permalink)
bosco 4XSURFER Join Date: Jul 2001 Member # 6021 Location: Temecula, CA Posts: 908	Nice rig man! Wish I was back in SLO so I could take it off of your hands. Bump for ya! __________________ I don't care about the Jeep thing as long as my mail is on time!!! 92 4runner 22re, DD, under (slow) construction. 2010 Honda Insight: Yakima surf racks, Wet Okole seat covers, HF air horn, 45+MPG!

06-14-2004, 04:27 PM	#6 (permalink)
ladywolf Registered User Join Date: Oct 2002 Member # 14268 Location: San Luis Obispo, CA Posts: 20	Thanks for the bumps, but is anyone interested? I'm willing to consider offers. __________________ Who says you can't be a lady and wheel?

06-05-2004, 07:33 PM	#3 (permalink)
Christman Registered User Join Date: Apr 2004 Member # 29956 Location: Sacramento, CA Posts: 129	Thats pretty nice. How many miles on it?

07-18-2004, 12:03 PM	#7 (permalink)
ladywolf Registered User Join Date: Oct 2002 Member # 14268 Location: San Luis Obispo, CA Posts: 20	ttt __________________ Who says you can't be a lady and wheel?

07-18-2004, 12:43 PM	#8 (permalink)
shamb Registered User Join Date: Aug 2003 Member # 22368 Location: Here Posts: 2,391	lol... i've got 5000 cash? worth a try right? lol... no one else seems to be steppin up to this killer rig. __________________ Knowledge is power [url]www.pirate4x4.com/forum[/url] New Project in the works, 85' 4runner aka ? R.I.P to ALL our brothers that have lost their lives doing what they love.

08-12-2004, 10:05 PM	#9 (permalink)
ladywolf Registered User Join Date: Oct 2002 Member # 14268 Location: San Luis Obispo, CA Posts: 20	Sorry, I went on vacation then started my new job and forgot to check back on the board for a while. Oops. Still interested in the toyota? __________________ Who says you can't be a lady and wheel?

08-31-2004, 09:36 PM	#10 (permalink)
ladywolf Registered User Join Date: Oct 2002 Member # 14268 Location: San Luis Obispo, CA Posts: 20	Ok, one last try, otherwise I'm gonna have to stick her on ebay, I need her off my hands. $6500 anyone? __________________ Who says you can't be a lady and wheel?

09-01-2004, 12:43 AM	#11 (permalink)
e-hills4x4 Registered User Join Date: Apr 2003 Member # 18993 Location: San Diego Posts: 640	ill be down there this weekend can you pm me a number i can reach you at

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode