93 Custom YJ whole or part - Pirate4x4.Com : 4x4 and Off-Road Forum

jalapeno · 10-23-2002, 04:42 PM

93 YJ REFLEX YELLOW, 4.0, 58K, CUSTOM COIL LINK SUSPENSION BY ALL WHEEL DRIVE IN FARMINGTON, IT WAS A WELL BUILT RIG, EXCELLENT TRAIL MACHINE OR LEGENDS CLASS COMPETITOR. HAS A BESTOP SUPERTOP, WINDSHIELD, MIRRORS, ETC. NEIL LILLARD AND AMY BULLOCK HAVE HAD MUCH SUCCESS WITH THIS SAME SUSPENSION. JUST ASK THEM!

JALAPENO PARTS FOR SALE
CUSTOM FRAME 4 LINK/THREE LINK COIL SPRING SUSPENSION, ALL LINKS, J-ARMS, SHOCKS, SPRINGS, LIMITING STRAPS, CUSTOM SKID PLATE (LAYS FLAT BETWEEN FRAME RAILS) $2700 OBO

38x12.5x15 SUPER SWAMPER SX’S 8 TRAIL RIDES, NO STREET USE SET OF 5 LIKE NEW 90-95% TREAD $700 SOLD!!!!

4 CHAMPION CENTERLINE HELLCAT BEADLOCKS (4) 5 ON 5.5 8.5X15 4.5” BACKSPACING PLUS SPARE, NO BEADLOCK $450 sold!

4 GOODYEAR WRANGLER 35x12.5x15 MTR’S OLD STYLE, 70% TREAD LEFT $225

4.O, 58,000 MILES, COMPLETE, WIRING, ACCESSORIES, EVERYTHING $1500 SOLD!!!

AX 15 WORKS PERFECTLY $550

NVG 231 W/ JB CONV 241 OUTPUT SHORT SHAFT, TERRA LOW 4:1, ONLY 2 SEASONS ON TERRA LOW $850 sold

FRONT AND REAR CV DRIVESHAFTS CALL FOR DETAILS

CUSTOM FUEL CELL SITS BEHIND REAR SEAT NON VENTED GAS CAP AND ROLL OVER VALVE $150

TUFFY SECURITY CONSOLE USED ONE SEASON $100

BESTOP SUPER TOP BLACK WITH SOFT DOORS AND ALL HARDWARE $150 SOLD!!

WINDSHIELD ASSEMBLY WITH WIPER MOTOR AND GLASS $400

TUB WITH HEATER, DASH, STEREO, SPEAKERS, PEDALS ETC $500
(mild roll over, email for details info@mysmsinc.com)

YJ GRILL $100

HOWE RAM USED SINCE MAY 2002 $100 SOLD!!

HWE STEERING BOX $350 SOLD!!

ARB AIR COMPRESSOR $100

REVERSE DANA 30 WITH ARB AND 4.56 GEARS ONLY 5000 MILES $650 OBO

SKYJACKER SOFTRIDE 3.5” SPRINGS USED ONE SEASON $150 FOR ALL 4

CURRIE FRONT SHORTY BUMPER SCRATCHED BUT STRAIGHT $100 SOLD!!!!

TOMKEN REAR BUMPER TWEAKED $25

OTHER OEM PARTS, PLEASE CALL OR EMAIL
PLEASE VIEW AT http://home.attbi.com/~jpgudka

www.sunrayengineering.com for axle info
www.avalancheengr.com for steering info

Po' riggity · 10-23-2002, 09:37 PM

You said part or whole, are you willing to part with the campbell hood?
Scott

CA_YJ · 10-24-2002, 03:49 AM

You got mail.

jalapeno · 10-24-2002, 07:16 AM

thanks for the update.

the hood is no longer a desirable item. it needs replacing

thanks for asking

jalapeno · 10-25-2002, 08:08 AM

TTT

Jeepmangled87 · 10-25-2002, 08:30 AM

cool rig to the top for ya

PIA · 10-25-2002, 08:42 AM

WANNA sell the tc and the 4:1?

jalapeno · 10-25-2002, 09:02 AM

YUP, I WILL SELL. TC HAD THE HD JB KIT INSTALLED (241 OUTPUT SHAFT) HAS ABOUT 5000 MILES ON IT, THE TERRALOW HAS ABOUT 1500 MILES ON IT AND ABOUT 10 OUTINGS ON IT.

I WAS ASKING 1200, I WILL TAKE 850.

tHANKS!

PIA · 10-25-2002, 09:20 AM

you say "had" the hd sye...no more? is it the normal hd sye kit? not sure what you mean about the 241.....i have an AA sye sitting here, but if this is good to go, would rather just throw it in.

jalapeno · 10-25-2002, 09:32 AM

The JB kit is still in it. it is the heavy duty output shaft conversion which uses a NP241 output shaft, it is something like 45% stronger than the 231 output shaft. Chevy and Dodge used the NP241 in 1/2 tons and some 3/4 ton applications. it is also 4-5 inches shorter than the stoke slip yoke. its a nice deal. the whole tc unit will bolt on to the back of your ax15. i will send it complete with the shifter and boot too. the shifter has been lengthened about 2" to accomodate a 2 inch body lift.

nevadayj · 10-25-2002, 10:25 AM

What about the motor and all accessories, computer, etc. Would you sell it complete? Would have to be shipped to NV. Let me know if you are interested in something like that.

Thanks!

jalapeno · 10-25-2002, 10:33 AM

absolutely. obviously looks like i am going to be parting it out sooner than selling the whole thing....

the motor is complete, 58k miles. runs perfect. all accessories, wires, etc....

nevadayj · 10-25-2002, 10:39 AM

What trans were you using? Were you using a fuel cell or the stock tank with the pump in it? I would need the tank & pump to make an easier swap into my 87 YJ. Anything done to the motor, ie-K&N, header, throttle body, etc?

Give me an idea on the price you want.

Thanks!
Doug

jalapeno · 10-25-2002, 10:58 AM

the motor is stone stock, with a k& n and a new intake tube. i am using fuel cell, you can see it http://home.attbi.com/~jpgudka

i am keeping the fuel pump though, i will need it. i am going to run a chevy motor... if anyone knows different, i will sell it too.

$1500 for engine complete

$150 for cell has roll over valve and non vented gas cap

nevadayj · 10-25-2002, 11:33 AM

Do you still have the stock tank? As for the price, I will have to think about it, as there is another one in Maine for $1250 shipped with 78K on it. I'll make a decision between the two soon.

Thanks for the reply, I will get back to you soon!
Doug

foley · 10-25-2002, 12:20 PM

Put me #2 in line for that T-Case.

Foley

jalapeno · 10-25-2002, 12:54 PM

you got it foley

let me know doug!

jalapeno · 10-25-2002, 04:15 PM

btt

The Rockslut · 10-25-2002, 09:49 PM

Send me some info on the axles.

Price for front and rear. Width, lug pattern yada yada

jalapeno · 10-26-2002, 08:21 AM

sorry, not selling the axles unless someone buys the rig whole. if i cant sell whole rig i am re-using them..

thanks for asking

jalapeno · 10-26-2002, 09:11 AM

if you need list of EVERYTHING this rig has email me directly!!

bigjeepinYJ · 10-27-2002, 05:01 PM

Are you selling the seats.... Could you post a list of everything that you would part out.

How much for the seats?

jalapeno · 10-27-2002, 07:51 PM

JALAPENO PARTS FOR SALE

38x12.5x15 SUPER SWAMPER SX’S 8 TRAIL RIDES, NO STREET USE SET OF 5 LIKE NEW 90-95% TREAD $700

4 CHAMPION CENTERLINE HELLCAT BEADLOCKS (4) 5 ON 5.5 8.5X15 4.5” BACKSPACING PLUS SPARE, NO BEADLOCK $450

4 GOODYEAR WRANGLER MTR’S OLD STYLE, 70% TREAD LEFT $225

CUSTOM FRAME 4 LINK/THREE LINK COIL SPRING SUSPENSION, ALL LINKS, J-ARMS, SHOCKS, SPRINGS, WITH CUSTOM SKID PLATE $2700

4.O, 58,000 MILES, COMPLETE, WIRING, ACCESSORIES, EVERYTHING $1500

AX 15 WORKS PERFECTLY $550

NVG 231 W/ JB CONV 241 OUTPUT SHORT SHAFT, TERRA LOW 4:1, ONLY 2 SEASONS ON TERRA LOW $850

FRONT AND REAR CV DRIVESHAFTS CALL FOR DETAILS

CUSTOM FUEL CELL SITS BEHIND REAR SEAT NON VENTED GAS CAP AND ROLL OVER VALVE $150

TUFFY SECURITY CONSOLE USED ONE SEASON $100

BESTOP SUPER TOP BLACK WITH SOFT DOORS AND ALL HARDWARE $150

WINDSHEILD ASSEMBLY WITH WIPER MOTOR AND GLASS $400

TUB STRIPPED $150

TUB WITH HEATER, DASH, STEREO, SPEAKERS, PEDALS ETC $500

BEARD SEATS $300

YJ GRILL $100

HOWE RAM USED SINCE MAY 2002 $150

ARB AIR COMPRESSOR $100

REVERSE DANA 30 WITH ARB AND 4.56 GEARS ONLY 5000 MILES $850

SKYJACKER SOFTRIDE 3.5” SPRINGS USED ONE SEASON $150 FOR ALL 4

CURRIE FRONT SHORTY BUMPER SCRATCHED BUT STRAIGHT $100

OTHER OEM PARTS, PLEASE CALL OR EMAIL

foley · 10-28-2002, 05:25 AM

Put me in on the Beadlock wheels, and I still want the T-Case if the other buyer falls through.

jalapeno · 10-28-2002, 06:51 AM

ok, should know something today. we will talk about the beadlocks.

10-23-2002, 04:42 PM	#1 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	93 CUSTOM YJ PARTING OUT 93 YJ REFLEX YELLOW, 4.0, 58K, CUSTOM COIL LINK SUSPENSION BY ALL WHEEL DRIVE IN FARMINGTON, IT WAS A WELL BUILT RIG, EXCELLENT TRAIL MACHINE OR LEGENDS CLASS COMPETITOR. HAS A BESTOP SUPERTOP, WINDSHIELD, MIRRORS, ETC. NEIL LILLARD AND AMY BULLOCK HAVE HAD MUCH SUCCESS WITH THIS SAME SUSPENSION. JUST ASK THEM! JALAPENO PARTS FOR SALE CUSTOM FRAME 4 LINK/THREE LINK COIL SPRING SUSPENSION, ALL LINKS, J-ARMS, SHOCKS, SPRINGS, LIMITING STRAPS, CUSTOM SKID PLATE (LAYS FLAT BETWEEN FRAME RAILS) $2700 OBO 38x12.5x15 SUPER SWAMPER SX’S 8 TRAIL RIDES, NO STREET USE SET OF 5 LIKE NEW 90-95% TREAD $700 SOLD!!!! 4 CHAMPION CENTERLINE HELLCAT BEADLOCKS (4) 5 ON 5.5 8.5X15 4.5” BACKSPACING PLUS SPARE, NO BEADLOCK $450 sold! 4 GOODYEAR WRANGLER 35x12.5x15 MTR’S OLD STYLE, 70% TREAD LEFT $225 4.O, 58,000 MILES, COMPLETE, WIRING, ACCESSORIES, EVERYTHING $1500 SOLD!!! AX 15 WORKS PERFECTLY $550 NVG 231 W/ JB CONV 241 OUTPUT SHORT SHAFT, TERRA LOW 4:1, ONLY 2 SEASONS ON TERRA LOW $850 sold FRONT AND REAR CV DRIVESHAFTS CALL FOR DETAILS CUSTOM FUEL CELL SITS BEHIND REAR SEAT NON VENTED GAS CAP AND ROLL OVER VALVE $150 TUFFY SECURITY CONSOLE USED ONE SEASON $100 BESTOP SUPER TOP BLACK WITH SOFT DOORS AND ALL HARDWARE $150 SOLD!! WINDSHIELD ASSEMBLY WITH WIPER MOTOR AND GLASS $400 TUB WITH HEATER, DASH, STEREO, SPEAKERS, PEDALS ETC $500 (mild roll over, email for details info@mysmsinc.com) YJ GRILL $100 HOWE RAM USED SINCE MAY 2002 $100 SOLD!! HWE STEERING BOX $350 SOLD!! ARB AIR COMPRESSOR $100 REVERSE DANA 30 WITH ARB AND 4.56 GEARS ONLY 5000 MILES $650 OBO SKYJACKER SOFTRIDE 3.5” SPRINGS USED ONE SEASON $150 FOR ALL 4 CURRIE FRONT SHORTY BUMPER SCRATCHED BUT STRAIGHT $100 SOLD!!!! TOMKEN REAR BUMPER TWEAKED $25 OTHER OEM PARTS, PLEASE CALL OR EMAIL PLEASE VIEW AT http://home.attbi.com/~jpgudka www.sunrayengineering.com for axle info www.avalancheengr.com for steering info __________________ Get an insurance quote in CO! Auto, Home, All your toys, Life, and Commercial www.jpgudka.com Last edited by jalapeno; 11-19-2002 at 10:31 AM.

10-24-2002, 03:49 AM	#3 (permalink)
CA_YJ Rock God Join Date: Sep 2001 Member # 7086 Location: San Diego, Ca Posts: 2,057	You got mail. __________________ 74Weld Design \| Prototype \| Production NO LIMIT CREW

10-25-2002, 08:42 AM	#7 (permalink)
PIA Registered User Join Date: Sep 2000 Member # 1739 Location: NW Posts: 873	WANNA sell the tc and the 4:1? __________________ If the path does not have any obstacles, it probably won’t lead you anywhere

10-25-2002, 09:20 AM	#9 (permalink)
PIA Registered User Join Date: Sep 2000 Member # 1739 Location: NW Posts: 873	you say "had" the hd sye...no more? is it the normal hd sye kit? not sure what you mean about the 241.....i have an AA sye sitting here, but if this is good to go, would rather just throw it in. __________________ If the path does not have any obstacles, it probably won’t lead you anywhere

10-25-2002, 10:25 AM	#11 (permalink)
nevadayj Granite Guru Join Date: Apr 2002 Member # 11578 Location: Minden, NV Posts: 922	What about the motor and all accessories, computer, etc. Would you sell it complete? Would have to be shipped to NV. Let me know if you are interested in something like that. Thanks! __________________ Boat dealer extraordinaire!

10-24-2002, 07:16 AM	#4 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	thanks for the update. the hood is no longer a desirable item. it needs replacing thanks for asking

10-25-2002, 08:08 AM	#5 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	TTT

10-25-2002, 08:30 AM	#6 (permalink)
Jeepmangled87 ROCK & ROLL OFFROAD Join Date: Mar 2001 Member # 3906 Location: ROCK AND ROLL OFFROAD Dallas/Ft.Worth Tx. Posts: 6,130	cool rig to the top for ya

10-25-2002, 09:02 AM	#8 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	YUP, I WILL SELL. TC HAD THE HD JB KIT INSTALLED (241 OUTPUT SHAFT) HAS ABOUT 5000 MILES ON IT, THE TERRALOW HAS ABOUT 1500 MILES ON IT AND ABOUT 10 OUTINGS ON IT. I WAS ASKING 1200, I WILL TAKE 850. tHANKS!

10-25-2002, 09:32 AM	#10 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	The JB kit is still in it. it is the heavy duty output shaft conversion which uses a NP241 output shaft, it is something like 45% stronger than the 231 output shaft. Chevy and Dodge used the NP241 in 1/2 tons and some 3/4 ton applications. it is also 4-5 inches shorter than the stoke slip yoke. its a nice deal. the whole tc unit will bolt on to the back of your ax15. i will send it complete with the shifter and boot too. the shifter has been lengthened about 2" to accomodate a 2 inch body lift.

10-25-2002, 10:33 AM	#12 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	absolutely. obviously looks like i am going to be parting it out sooner than selling the whole thing.... the motor is complete, 58k miles. runs perfect. all accessories, wires, etc....

10-25-2002, 10:39 AM	#13 (permalink)
nevadayj Granite Guru Join Date: Apr 2002 Member # 11578 Location: Minden, NV Posts: 922	What trans were you using? Were you using a fuel cell or the stock tank with the pump in it? I would need the tank & pump to make an easier swap into my 87 YJ. Anything done to the motor, ie-K&N, header, throttle body, etc? Give me an idea on the price you want. Thanks! Doug __________________ Boat dealer extraordinaire!

10-25-2002, 10:58 AM	#14 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	the motor is stone stock, with a k& n and a new intake tube. i am using fuel cell, you can see it http://home.attbi.com/~jpgudka i am keeping the fuel pump though, i will need it. i am going to run a chevy motor... if anyone knows different, i will sell it too. $1500 for engine complete $150 for cell has roll over valve and non vented gas cap

10-25-2002, 11:33 AM	#15 (permalink)
nevadayj Granite Guru Join Date: Apr 2002 Member # 11578 Location: Minden, NV Posts: 922	Do you still have the stock tank? As for the price, I will have to think about it, as there is another one in Maine for $1250 shipped with 78K on it. I'll make a decision between the two soon. Thanks for the reply, I will get back to you soon! Doug __________________ Boat dealer extraordinaire!

10-25-2002, 12:54 PM	#17 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	you got it foley let me know doug!

10-25-2002, 04:15 PM	#18 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	btt

10-25-2002, 09:49 PM	#19 (permalink)
The Rockslut Registered User Join Date: Jun 2001 Member # 5021 Location: Lincoln, CA Posts: 5,967	Send me some info on the axles. Price for front and rear. Width, lug pattern yada yada __________________ Don't be "THAT GUY" on the trail. www.voodoowax.com

10-26-2002, 08:21 AM	#20 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	sorry, not selling the axles unless someone buys the rig whole. if i cant sell whole rig i am re-using them.. thanks for asking

10-26-2002, 09:11 AM	#21 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	if you need list of EVERYTHING this rig has email me directly!!

10-27-2002, 05:01 PM	#22 (permalink)
bigjeepinYJ Registered User Join Date: Jan 2002 Member # 9145 Location: Southern, IN Posts: 692	Are you selling the seats.... Could you post a list of everything that you would part out. How much for the seats?

10-27-2002, 07:51 PM	#23 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	JALAPENO PARTS FOR SALE 38x12.5x15 SUPER SWAMPER SX’S 8 TRAIL RIDES, NO STREET USE SET OF 5 LIKE NEW 90-95% TREAD $700 4 CHAMPION CENTERLINE HELLCAT BEADLOCKS (4) 5 ON 5.5 8.5X15 4.5” BACKSPACING PLUS SPARE, NO BEADLOCK $450 4 GOODYEAR WRANGLER MTR’S OLD STYLE, 70% TREAD LEFT $225 CUSTOM FRAME 4 LINK/THREE LINK COIL SPRING SUSPENSION, ALL LINKS, J-ARMS, SHOCKS, SPRINGS, WITH CUSTOM SKID PLATE $2700 4.O, 58,000 MILES, COMPLETE, WIRING, ACCESSORIES, EVERYTHING $1500 AX 15 WORKS PERFECTLY $550 NVG 231 W/ JB CONV 241 OUTPUT SHORT SHAFT, TERRA LOW 4:1, ONLY 2 SEASONS ON TERRA LOW $850 FRONT AND REAR CV DRIVESHAFTS CALL FOR DETAILS CUSTOM FUEL CELL SITS BEHIND REAR SEAT NON VENTED GAS CAP AND ROLL OVER VALVE $150 TUFFY SECURITY CONSOLE USED ONE SEASON $100 BESTOP SUPER TOP BLACK WITH SOFT DOORS AND ALL HARDWARE $150 WINDSHEILD ASSEMBLY WITH WIPER MOTOR AND GLASS $400 TUB STRIPPED $150 TUB WITH HEATER, DASH, STEREO, SPEAKERS, PEDALS ETC $500 BEARD SEATS $300 YJ GRILL $100 HOWE RAM USED SINCE MAY 2002 $150 ARB AIR COMPRESSOR $100 REVERSE DANA 30 WITH ARB AND 4.56 GEARS ONLY 5000 MILES $850 SKYJACKER SOFTRIDE 3.5” SPRINGS USED ONE SEASON $150 FOR ALL 4 CURRIE FRONT SHORTY BUMPER SCRATCHED BUT STRAIGHT $100 OTHER OEM PARTS, PLEASE CALL OR EMAIL

10-28-2002, 06:51 AM	#25 (permalink)
jalapeno Registered User Join Date: Oct 2002 Member # 14425 Location: Denver Posts: 478	ok, should know something today. we will talk about the beadlocks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode