Increase the front suspension damping capacity on 2011 HD’s with Fabtech’s Dual Shock system. This Dual Shock system is designed to be installed exclusively with a Fabtech 6″ RTS™ system for a total suspension upgrade.
Constructed of 1.5″ OD x .120 wall DOM tubing the upper mounting hoops securely attach to the frame allowing use of Fabtech Performance or Dirt Logic 2.0 Resi shocks. The lower shock mounts are incorporated into the Fabtech 6″ RTS™ system already thereby simplifying the installation of this Dual Shock system.
The mounting location of the lower ends of the Dual Shocks are revolutionary in that they do not mount to the upper control arms as the aftermarket trend has been, but to the lower control arms. The 2011 HD factory lower control arms are much larger and stronger than any upper control arms since they have been constructed to be load bearing to handle the weight of the vehicle. They also come with larger ball joints and have been designed by the factory to handle four bumps stops and shock absorber loads. Fabtech is the first to build a 2011 HD Dual Shock system mounted to the lower control arms utilizing the factory’s proven design for maximum strength and ball joint longevity.
The Dual Shock System is compatible with both Gas and Diesel model HD’s with 6″ RTS™ systems and comes finished in black powder coat.