Controling your TJ A/C mode select - Pirate4x4.Com : 4x4 and Off-Road Forum
 
Pirate4x4.Com : 4x4 and Off-Road Forum  

Go Back   Pirate4x4.Com : 4x4 and Off-Road Forum > Brand Specific Tech > Jeep - Non Hardcore
Notices

Reply
 
Share LinkBack Thread Tools Display Modes
Old 03-08-2006, 11:07 AM   #1 (permalink)
Registered User
 
Join Date: Feb 2006
Member # 68171
Location: Colorado
Posts: 2,065
Controling your TJ A/C mode select

To make the heating system work in recycle mode without the A/C running, I installed a switch in the face of the heater control panel tying it into wire C90 20 LG (light green) connector C3 on the right-hand, backside of the control panel (1997-2000+?). This is the 28v discreet signal for A/C to the PCM and will allow recycle mode with heat only. Just like the a/c on/off switch found in some cars. Another plus to this mod is face and feet heat without having the A/C activated. With an automatic transmission (and manual) this also prevents the PCM from cycling the engine idle up/down when in defrost mode, I like crawling rocks and hate that.

The service manual states that the control panel is not serviceable except for changing the switches on the back. If you pry up on the clips on the back you can separate the housing from the cover, remove the control knobs and remove/open it. With the lighting array for the front panel there isn’t a lot of room to add a switch. I located a place to dermel out a mounting hole to the right (lower) of the mode select control knob. Added a Radio Shack disconnect plug to the back of the housing, when you tie into the wiring on the C3 connector there has to be some way of disconnecting the panel from the harness to completely remove the control panel. Or mount the switch somewhere else?

If you have a 1997 or 98? TJ with the slider controls on the heater/A/C control panel the modification is basically the same except for the connector and pin identification on the back of the control panel. The wire number remains the same.
Control panel; connector C218, pin D, wire C90 20LG (light green).
This is from Chrysler document number 80a3b40b J968W-5.
It also looks like 2001-2006 are the same as the 2000…
HTH
__________________
Knuckelhead

Last edited by Knuckelhead; 03-08-2006 at 11:10 AM.
Knuckelhead is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Pirate4x4.Com : 4x4 and Off-Road Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.

** A VERIFICATION EMAIL IS SENT TO THIS ADDRESS TO COMPLETE REGISTRATION!! **

Email Address:
Insurance
Please select your insurance company (Optional)

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 05:37 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 ©2011, Crawlability, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.