Extreme Willys Wagons and Trucks
 

Ok I can't take it anymore, so post up... (inspired by Pdaddy's post)

All you fellows out there with Wagons, Trucks, or Willys other than CJ's post up you hard work. A pic and description. I want this thread to help others that are still working on the forgotten cousins of the Jeep.

I have a 1959 Willys Wagon mated to a 1976 Wagoneer chassis. Running Dana 44's front and rear, 401V8, TH 400, 4" of Lift, 35" Dunlop MT's, 12000 lb winch and more to come, but not yet finished.

There should be a guy in Yuba City with a bad ass truggy too.

Pic's coming shortly.

If we get good enough response I can create a mailing list for those that want to assist or talk shop without dogging the Pirate Board.

Later AJ

here's mine: 53 willys pick-up 4.3 vortec, 4.3 atlas, 700r4, Mog 404's 42" TSL's, hummer beadlocks, double tri 4link front and rear 16" air shocks but I'm not done yet so here is what I have so far :)

I would like to get on that mailing list. My dad has a '53 pick up. Right now it is in pieces. Its going to be restored/built. Hopefully it will have D44's front and rear with the original 4 banger Go Devil :D

I'd post but I don't have a red star there are some pics on the second page of the guy aboves buildup page if someone can move them.Then I can describe it better

here you go

Someone wanna post a pic of my rig? '61 Wagon, 350 V8, TH400, Dana 44s, ps, tilt. :D

man i love those trucks...they're so mean lookin...i wanna do one when i get done with my scrambler....what do you think...rockwells or 404s...with some 49in iroks...and wagon would be nice on 49s...

lets get some more pics...

-James

Thanks for putting that pic up. I know there are more willys on here. Come on TONKA, Magnum willys, Pdaddy you all have some.

I have a 47 Willys truck I've been working on for a while. I took an 18 inch strip out of the center and put the two sides back together. Now it is about 24 inches wide in the front and 48 inches wide in the rear. Center mounted steering and one bucket seat. Can poke my head out of ether side window and see each front tire. Mounted the cab on a shortend 100 inch wheel base 1977 J20 frame. 360 T18 granny low dana 44/60 spring over. I have some pictures.
http://www.geocities.com/little47willys/

my willys
 

my pics are in the link:
http://f2.pg.photos.yahoo.com/ph/camaro69fine/my_photos
p.s. its for sale too!! :D

willy's pick up
 

no pics yet, but my junk is almost road worthy, 55 pick up cab on suburban frame shortened to 106 wheelbase,2001 5.7, 700r4,np203, d44, d60 lincoln locked, propane power, running 52 inch springs in front and 63 inch springs in rear.

CJrider
more pics of that narrowed cab, :beer: :beer:

Thanks mark.bales for posting a photo. Got a long way to go on the project. Have to fab a front clip, small box in back will be like a dump box to get at fuel cell and batteries, make roll cage ect. Trying to keep it mostly stock 77 J20 parts, except for high angle rear drive shaft (thanks Jess). Got the cab for free so I didn't have anything to loose by trying to narrow it, I think it turned out ok. Then when it's done I get to rip it all apart again to blast and paint. More than likly run 36x16 rims and tires. more cab photos at littlewillys web site. I would like to get on that e mail list too.

as requested, he goes by spinetx

pm me randi :flipoff2:

My Willys
 

Well gentlemen, here is my Willys and my first attempt at posting with my new Red Star. I'll continue to add pics as I work and finsih this damn project.

The third pic shows the engine moved back 4" from the stock location, and the frame was shortened in the middle 5". Thanks AJ

My 1959 CJ5 willys
 

my 67 M715
 

this truck is bad ass anyone know what the WB is?? more pic's??

any more info on this truck.....looks like GMC 2.5 ton axles.....whats the rest of the drivetrian?

Thanks,
Justin

46 willys Cj-2a, toy axles, soon to come chevy 4.3, sm465, and dana 20. 82inch wheel base, spring over, shackle revesal, 2 1/2 springs, 36" tires
trying to get a picture posted. having problems. 1284 on the RTI score.
Misterarj has seen it. :D

That thing got potential :eek:

Thanks guys 67 M715
 

Yes they are 2.5 gmcs. along with the Xcase. It has a 427 Tb Chevy an Allison 4 speed auto. We are adding Detroits and 14.00r 20 tires and USA6x6 wheels

forgot some
 

Also doing the full hydro steering front and rear, Full military paint soft top and cage. Looking for sponcers. Get your name on this truck!

http://www.steve88xj.com/blacksheep/willy/DSC00270.JPG

:flipoff2:


Work in progress, but will be ALL parts from Jeeps. :rolleyes: I finished the front clip this weekend. 1950 Willy pickup on a 1973 wagoneer frame and drive train. Its an AMC 304, but I's gonna bore if over .060 and build it from there. Why? I paid $150 for the whole 1973 wagoneer.... :grinpimp:

I'm interested. My buddie is actually building his on a Wagoneer Chasis, but doing the 1 ton running gear and a nice big block....

Next up will be a Wagoneer frame project for a Willy Wagon...