All our different Weld Washers from Ruffstuff! - Pirate4x4.Com : 4x4 and Off-Road Forum
 
Pirate4x4.Com : 4x4 and Off-Road Forum  

Go Back   Pirate4x4.Com : 4x4 and Off-Road Forum > Vendor's Marketplace > Miscellaneous
Notices

Reply
 
Share LinkBack Thread Tools Display Modes
Old 03-27-2015, 03:10 PM   #1 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Arrow All our different Weld Washers from Ruffstuff!

When we first came out with our Weld Washers 8 years ago they had been made by 20 other companies for years. They were great as a preventative measure when first building a vehicle because they are 7/32" thick but were not as good for repair's. The reinforce a good hole with more than 3/16" of additional steel and come in 1/2", 9/16", 5/8", & 3/4" to cover the bases for you.



Then 3 years ago we added the Fixit Weld Washers. They were primarily for repairing a hole that was already bad from use. They create a clean new bolt hole in 1/2", 9/16", 5/8", or 3/4" and all are 3/8" thick so you don't have to worry about what you fix!



Now just 2 weeks ago we came up with something else along these lines that in some ways is even cooler! Our Threaded Weld Washers. These are used to add something to your chassis in as easy a way you can that is strong enough to stand up to years of use and abuse. They are available for a 5/16", 3/8", & 1/2" thread bolts and require a 3/4" hole to be drilled for mounting so they can be added for anything down to a 1 1/4" Tube and of course any plate or sheet stock.



I seriously see these as something that should be on pretty much any fabricators shelf because there are so many possible uses for them. I am not joking here, these simply make too much sense...

These are all found in our Reinforcements section where we have a whole bunch of things like these

Reinforcement Plates - RuffStuff Specialties
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 03-30-2015, 06:45 PM   #2 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
This was a repeat from another section, it just seems to fit here better...We have been making weld washers since the start, they were one of our first products.
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Sponsored Links
Old 04-16-2015, 09:25 PM   #3 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Time to plan it from the start? These are a must when building something you want to stay built!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
 
Old 05-17-2015, 04:37 PM   #4 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
The right way to build something to last or repair something right!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 05-20-2015, 09:13 PM   #5 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
If its time to start a build its time to do it right!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 05-24-2015, 08:12 AM   #6 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
A great starting point for extreme strength in hundreds of ways, use'em!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 06-02-2015, 04:47 PM   #7 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Stock up on yours, they have plenty of uses!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 06-28-2015, 01:29 PM   #8 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Useful in hundreds of ways
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 07-19-2015, 03:20 PM   #9 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
I see these as one of the most useful items we have ever made!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 08-03-2015, 05:22 PM   #10 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Great parts, affordable prices, quality customer service! What more could you ask for
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 08-07-2015, 10:58 AM   #11 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Something everyone should have on the shelf!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 08-11-2015, 09:18 PM   #12 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
The stuff you need to do the job right!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 10-21-2015, 07:48 PM   #13 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
One of my favorite items! Strength and its simple
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 11-07-2015, 07:41 AM   #14 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
A big variety of ways to use these to your benefit Show us how you used them!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 11-13-2015, 10:11 PM   #15 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
The best way to assure that it is as strong as it will get!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 12-10-2015, 07:11 PM   #16 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
8 Years in the making
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 01-02-2016, 03:29 PM   #17 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Some of the best parts are the small ones
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 01-06-2016, 05:46 PM   #18 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Made to help you stay built!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 01-20-2016, 10:08 AM   #19 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Made by elves in a hollow tree
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 01-20-2016, 10:22 AM   #20 (permalink)
Rock God
 
whitneyj's Avatar
 
Join Date: May 2009
Member # 135947
Location: Oshkosh, WI
Posts: 2,369
Do you have torque values that these are rated for? I'm primarily concerned with 1/2". I'm also curious if you'd be willing to make these tapped for 9/16" 18tpi? Would these be an option for something like a TTB pivot bolt?
__________________
Place banana in your ear.
Observe that there are no alligators around.
Conclude bananas placed in ears keep alligators away.
whitneyj is offline   Reply With Quote Quick reply to this message
Old 01-20-2016, 01:24 PM   #21 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Quote:
Originally Posted by whitneyj View Post
Do you have torque values that these are rated for? I'm primarily concerned with 1/2". I'm also curious if you'd be willing to make these tapped for 9/16" 18tpi? Would these be an option for something like a TTB pivot bolt?
I'm sorry the answer took so long, I had to ask our engineer.

70lbs should be about right but it would definitely depend on the quality of the weld.

I don't think we could make those for the 18tpi without losing about $3 each because of demand, however you could simply tap a smaller one to the thread you want.
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 01-26-2016, 07:29 PM   #22 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Time to start your new project? Re-enforce BEFORE you need it!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 02-11-2016, 09:36 PM   #23 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
The goal is bomber! Get it right before you wish you had
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 02-25-2016, 05:29 PM   #24 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
We offer so many ways to make it better
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Old 03-10-2016, 09:55 AM   #25 (permalink)
Pirate4x4 Addict!
 
Gravel Maker's Avatar
 
Join Date: Aug 2005
Member # 51387
Location: Loomis, CA
Posts: 25,430
Blog Entries: 2
Send a message via Yahoo to Gravel Maker
Time to replace that one pain-in-the-ass nut that you can never reach with a wrench!
__________________
Dan Fredrickson
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

......"The NEW Industry Standard"

Tech/Sales 916.600.1945


You can SAY anything, its what you DO that matters!
Gravel Maker is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Pirate4x4.Com : 4x4 and Off-Road Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.

** A VERIFICATION EMAIL IS SENT TO THIS ADDRESS TO COMPLETE REGISTRATION!! **

Email Address:
Insurance
Please select your insurance company (Optional)

Log-in


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 02:53 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 ©2011, Crawlability, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.