Pirate4x4.Com : 4x4 and Off-Road Forum

Pirate4x4.Com : 4x4 and Off-Road Forum (/forum/)
-   Motor/Tranny/T-Case Performance (https://www.pirate4x4.com/forum/57-motor-tranny-t-case-performance/)
-   -   7/8" Clocking ring!! D300 6 bolt (https://www.pirate4x4.com/forum/motor-tranny-t-case-performance/1010047-7-8-clocking-ring-d300-6-bolt.html)

4WHEELSUPPLY 09-26-2011 02:06 PM

7/8" Clocking ring!! D300 6 bolt
 
1 Attachment(s)
Well I finally had enough time to make a few of these for you guys to try. Had a bunch of people asking about them so here they are. 6 bolt clocking ring that will work with D300's and other 6 bolt pattern NP cases. 7/8" thick for spacing on a few applications. No guarantees this will work for your application. $75 each to your door. Hardware is included! In stock ready to ship. See my other post for other products also.

THIS RING WILL NOT FLIP YOUR STOCK DANA 300 TO A DRIVER SIDE OUTPUT!!!! YOU WILL NEED MY FLIP RING TO DO SO.

DRIVER SIDE CLOCKING WORKS ON FACTORY DRIVER SIDE OUTPUT CASES WITH THE SAME 6 BOLT ROUND PATTERN AS D300 i.e NP208 241 AND MANY OTHERS



VIEW MORE DETAILS AND ORDER HERE: https://www.fourwheelsupply.net/prod...thick-ax15-aw4

jkl 09-27-2011 03:14 PM

Payment sent!

4WHEELSUPPLY 09-27-2011 07:15 PM

Thanks for the order!!!

937Comanche 10-12-2011 11:22 PM

Order Sent via Paypal to [email protected]

4WHEELSUPPLY 10-13-2011 06:41 AM

Got it!!! Ring Will ship [email protected]!!

cincinnatijeeper 10-20-2011 05:21 PM

Payment sent. Thanks!!!

mi xj 10-25-2011 11:19 AM

Payment sent. Thanks

4WHEELSUPPLY 10-30-2011 08:21 AM

Thanks for all orders!

4WHEELSUPPLY 11-24-2011 07:29 AM

ttt

FOURX4TRUX 11-29-2011 08:56 PM

Money sent

4WHEELSUPPLY 11-30-2011 06:28 AM

Quote:

Originally Posted by FOURX4TRUX (Post 13673784)
Money sent



Got it! Ships today Thanks

4WHEELSUPPLY 12-18-2011 06:08 PM

btt

jjeeper03 12-28-2011 12:40 PM

money sent!!

4WHEELSUPPLY 12-28-2011 07:16 PM

Got it! Shipped! Thanks

CTYJ 01-22-2012 01:45 PM

What's the verdict on the 7/8 clocking ring ? Any issues ?

4WHEELSUPPLY 01-22-2012 06:11 PM

Quote:

Originally Posted by CTYJ (Post 13902096)
What's the verdict on the 7/8 clocking ring ? Any issues ?

Sold a bunch with no issues. Thanks

oldrivers 01-22-2012 10:51 PM

Is it possible to get one with only the 6 countersunk holes without the others drilled and tapped?

4WHEELSUPPLY 01-23-2012 06:36 AM

Quote:

Originally Posted by oldrivers (Post 13904978)
Is it possible to get one with only the 6 countersunk holes without the others drilled and tapped?

It is possible, I could do a couple like that on my next run. But, excuse my ignorance, But I dont understand why you would only need the countersunk thru holes?

oldrivers 01-23-2012 11:38 AM

Quote:

Originally Posted by 4WHEELSUPPLY (Post 13905478)
It is possible, I could do a couple like that on my next run. But, excuse my ignorance, But I dont understand why you would only need the countersunk thru holes?


because i want to use it with a "dd machine box 4 rocks kit" and the other holes are drilled in a different spot so id have to have them drilled out later .
his ring is 1/4 inch and im pretty sure i need a 7/8ths to fit a ford 205 to clear the idle shaft and nut wich sticks up about 7/8ths ..

CTYJ 01-24-2012 09:30 AM

Quote:

Originally Posted by 4WHEELSUPPLY (Post 13903331)
Sold a bunch with no issues. Thanks

Nice. Order on the way. Thanks

CTYJ 01-24-2012 09:43 AM

Payment sent. Thanks

4WHEELSUPPLY 01-24-2012 10:00 AM

got it thanks

oldrivers 01-25-2012 09:14 PM

Quote:

Originally Posted by 4WHEELSUPPLY (Post 13905478)
It is possible, I could do a couple like that on my next run. But, excuse my ignorance, But I dont understand why you would only need the countersunk thru holes?


If its not to late hold off on this for now, need to do more research .

but if you already are into it let me know dont want to leave you holding something i requested.

gtxracer 01-29-2012 01:46 AM

Does this allow for both passenger and driver drop dana 300 applications like your 3/8" ring?

JustAHumbleJeeper 01-31-2012 08:37 PM

Noob question here.

Would these clocking rings work on an NP231 to a 4l60e? Both are 6 bolt. I'll be doing an engine swap, and will 99.9% likely be needing a clocking ring.


All times are GMT -7. The time now is 02:32 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 ©2011, Crawlability, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.