Register Now

Randy · 11-30-2010, 12:49 PM

This kit is designed to fit LS engines with F-Body belt lines. It will work with ANY LS engine, including truck blocks, as long as you utilize Camaro water pump and crank pulley. It moves the alternator to the passenger side cylinder head. This allows more room on the driver side for your four link suspension. The belt on the engine is only to show routing at the alternator and is not included in the kit because everyone uses different power steering pumps and pulleys. We have been running this set-up on the Bomber Fabrication race car for over two years with no problems.

Kit features

* CNC Machined brackets from 6061 T6 aluminum.
* New 105A alternator - Option 140A alternator, or up to 320A billet alternators
* New Belt tensioner
* New high grade socket head hardware
* Alternator pig tail

* Option, 70mm over sized pulley to slow down the alt. If you like to make your motor sing like me this pulley will help make your alt live a full life. $20

* New option, billet Mech Man alternators. This alternator can be built to several output options ranging from 170 amps to 320 amps

* Our newest option, billet idler bracket to create more rap on the power steering and crank pulleys. $80

We can also supply any PSC steering parts that you may need.

$450 plus tax and shipping

Check us out at http://bomberfab.com/ where you can get more info and order on line!

909 499 3537

LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 L76 L92

mudtruck44 · 11-30-2010, 01:53 PM

Bad ass. I might call and get one for the car I'm building.

TCARP1 · 11-30-2010, 06:59 PM

Randy, forgive me I am new to the LS motors, but what would you use on the other side for the power steering pump? I have nothing on the front of my motor right now and need to get the accesories up as high as possible. I have a big ass donkey bracket right now that came off a truck 6.0, but I am running a flipped car intake and I have a car waterpump. Basicly what I am asking is what the hell do I need in addition to your bracket system, and can you PM me a price for your system without the Alternator. Thanks!

Travis

Randy · 11-30-2010, 07:46 PM

Ill get some pics of my full system that I use on my car asap. I have run either a Howe or PSC pump that mounts to the driver head. I also have a fabbed idler bracket that sits below the ps pump that gives more belt rap on the crank and ps pulleys. If you are want to run this system you will need to get a F-body crank pulley. The belt line on the F-body motors is 3/4" closer to the motor than the truck set-up. Also your stock alternator is not compatible with this bracket. Hope that helps. Let me know if I can help you out.

Quote:

Originally Posted by TCARP1

Randy, forgive me I am new to the LS motors, but what would you use on the other side for the power steering pump? I have nothing on the front of my motor right now and need to get the accesories up as high as possible. I have a big ass donkey bracket right now that came off a truck 6.0, but I am running a flipped car intake and I have a car waterpump. Basicly what I am asking is what the hell do I need in addition to your bracket system, and can you PM me a price for your system without the Alternator. Thanks!

Travis

dan58 · 12-01-2010, 07:49 AM

Do you have any brackets that would allow the use of twin steering pumps?

Randy · 12-01-2010, 10:40 AM

Quote:

Originally Posted by dan58

Do you have any brackets that would allow the use of twin steering pumps?

No, sorry.

Air Ride · 12-07-2010, 12:53 PM

Nice looking bracket Randy, I wish I had an LS to put one on.

Yjunk · 12-07-2010, 02:04 PM

That thing looks great, now if you could just build one to hold a cs144 and a 40# Leece 320 I'd be a happy camper... I'm all about the DC power.

TCARP1 · 12-09-2010, 06:22 PM

PM sent... can't wait to run this setup!!

Randy · 12-15-2010, 11:33 AM

Here are some pics of the alternator system on the new Bomber Fabrication race car.

Dookey · 12-15-2010, 11:46 AM

What about brackets to relocate the A/C up there on my RPO L92??

Randy · 12-16-2010, 10:51 PM

Quote:

Originally Posted by Dookey

What about brackets to relocate the A/C up there on my RPO L92??

Sorry I dont have anything for a/c.

Randy · 12-22-2010, 05:25 PM

Back up for Christmas

kayhay · 12-28-2010, 10:00 PM

who did your wiring harness and programmed your pcm? i've got a ls2 i'm trying to find the best place for the money to do my harness thank you

Randy · 01-04-2011, 10:00 AM

The harness and computer that I'm running came from CBM.

Randy · 01-08-2011, 06:51 PM

Thanks for all the orders guys.

TCARP1 · 01-11-2011, 11:57 PM

Freshly installed! Worked awesome Randy! Thanks for the great product!

Randy · 01-17-2011, 08:24 PM

Thanks Travis.

SPOR706 · 01-21-2011, 09:56 PM

Do u offer the brackets for the power steering to i like this set up if it comes with needed bracket for power steering pump

Randy · 01-23-2011, 10:32 AM

Quote:

Originally Posted by SPOR706

Do u offer the brackets for the power steering to i like this set up if it comes with needed bracket for power steering pump

I do offer the idler pulley bracket set up separate from the alternator kit.

Thanks

Fl-Krawler · 02-02-2011, 06:54 AM

Price on one shipped to 33541(Zephyrhills,Fl)

syko · 02-06-2011, 01:03 PM

PM sent

Randy · 02-14-2011, 03:28 PM

Thanks for the orders.

Randy · 02-22-2011, 12:35 PM

top

Randy · 03-03-2011, 01:08 PM

Ttt

11-30-2010, 12:49 PM	#1 (permalink)
Randy Fabster Join Date: Jan 2001 Member # 3069 Location: Gardnerville NV Posts: 2,528	LS1 - LS7 alternator relocation bracket kit This kit is designed to fit LS engines with F-Body belt lines. It will work with ANY LS engine, including truck blocks, as long as you utilize Camaro water pump and crank pulley. It moves the alternator to the passenger side cylinder head. This allows more room on the driver side for your four link suspension. The belt on the engine is only to show routing at the alternator and is not included in the kit because everyone uses different power steering pumps and pulleys. We have been running this set-up on the Bomber Fabrication race car for over two years with no problems. Kit features * CNC Machined brackets from 6061 T6 aluminum. * New 105A alternator - Option 140A alternator, or up to 320A billet alternators * New Belt tensioner * New high grade socket head hardware * Alternator pig tail * Option, 70mm over sized pulley to slow down the alt. If you like to make your motor sing like me this pulley will help make your alt live a full life. $20 * New option, billet Mech Man alternators. This alternator can be built to several output options ranging from 170 amps to 320 amps * Our newest option, billet idler bracket to create more rap on the power steering and crank pulleys. $80 We can also supply any PSC steering parts that you may need. $450 plus tax and shipping Check us out at http://bomberfab.com/ where you can get more info and order on line! 909 499 3537 LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 L76 L92 Attached Images __________________ Thanks for the support Currie Enterprises PSC Steering BFGoodrich Tires Reid Racing King Shocks Trail Ready Wheels Baja Designes K&N CBM Engines Bulldog Winch Spidertrax Maximum Trans CBR Radiator PRP seats Steinjager PCI 208 Motorsports 2015 KING 2013 KING To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Last edited by Randy; 08-10-2015 at 09:47 AM.

11-30-2010, 01:53 PM	#2 (permalink)
mudtruck44 Registered User Join Date: Dec 2001 Member # 8937 Location: Sparks, Nevada Posts: 6,145	Bad ass. I might call and get one for the car I'm building. __________________ *To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.* September 24-25, Wild West Motorsports Park, Reno, NV *#199/4499* - *Superchips, Maxxis, Trail Gear, Branik Machine Shop, Yukon, JE Reel, Rugged Radios, Lifetime LED, Sway-a-way. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.*

11-30-2010, 06:59 PM	#3 (permalink)
TCARP1 Registered User Join Date: Feb 2007 Member # 86691 Location: Orangevale, CA Posts: 2,059	Randy, forgive me I am new to the LS motors, but what would you use on the other side for the power steering pump? I have nothing on the front of my motor right now and need to get the accesories up as high as possible. I have a big ass donkey bracket right now that came off a truck 6.0, but I am running a flipped car intake and I have a car waterpump. Basicly what I am asking is what the hell do I need in addition to your bracket system, and can you PM me a price for your system without the Alternator. Thanks! Travis __________________ Ex racer guy:D

12-07-2010, 12:53 PM	#7 (permalink)
Air Ride Tech Editor Join Date: Sep 2000 Member # 1656 Location: Santa Margarita, north of bender land Posts: 4,166	Nice looking bracket Randy, I wish I had an LS to put one on. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. camo is my hero, even if he is gay To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

12-09-2010, 06:22 PM	#9 (permalink)
TCARP1 Registered User Join Date: Feb 2007 Member # 86691 Location: Orangevale, CA Posts: 2,059	PM sent... can't wait to run this setup!! __________________ Ex racer guy:D

12-01-2010, 07:49 AM	#5 (permalink)
dan58 Zeus of the Sluice Join Date: May 2003 Member # 19330 Location: Easton, PA Posts: 3,129	Do you have any brackets that would allow the use of twin steering pumps?

12-07-2010, 02:04 PM	#8 (permalink)
Yjunk Registered User Join Date: May 2006 Member # 73120 Posts: 54	That thing looks great, now if you could just build one to hold a cs144 and a 40# Leece 320 I'd be a happy camper... I'm all about the DC power.

12-15-2010, 11:33 AM	#10 (permalink)
Randy Fabster Join Date: Jan 2001 Member # 3069 Location: Gardnerville NV Posts: 2,528	Here are some pics of the alternator system on the new Bomber Fabrication race car. Attached Images __________________ Thanks for the support Currie Enterprises PSC Steering BFGoodrich Tires Reid Racing King Shocks Trail Ready Wheels Baja Designes K&N CBM Engines Bulldog Winch Spidertrax Maximum Trans CBR Radiator PRP seats Steinjager PCI 208 Motorsports 2015 KING 2013 KING To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

12-15-2010, 11:46 AM	#11 (permalink)
Dookey ANGER IS A GIFT Join Date: Oct 2003 Member # 23680 Location: Thornton, CO Posts: 19,449	What about brackets to relocate the A/C up there on my RPO L92??

12-22-2010, 05:25 PM	#13 (permalink)
Randy Fabster Join Date: Jan 2001 Member # 3069 Location: Gardnerville NV Posts: 2,528	Back up for Christmas __________________ Thanks for the support Currie Enterprises PSC Steering BFGoodrich Tires Reid Racing King Shocks Trail Ready Wheels Baja Designes K&N CBM Engines Bulldog Winch Spidertrax Maximum Trans CBR Radiator PRP seats Steinjager PCI 208 Motorsports 2015 KING 2013 KING To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

12-28-2010, 10:00 PM	#14 (permalink)
kayhay Registered User Join Date: Dec 2010 Member # 177969 Posts: 46	wiring who did your wiring harness and programmed your pcm? i've got a ls2 i'm trying to find the best place for the money to do my harness thank you

01-04-2011, 10:00 AM	#15 (permalink)
Randy Fabster Join Date: Jan 2001 Member # 3069 Location: Gardnerville NV Posts: 2,528	The harness and computer that I'm running came from CBM. __________________ Thanks for the support Currie Enterprises PSC Steering BFGoodrich Tires Reid Racing King Shocks Trail Ready Wheels Baja Designes K&N CBM Engines Bulldog Winch Spidertrax Maximum Trans CBR Radiator PRP seats Steinjager PCI 208 Motorsports 2015 KING 2013 KING To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

01-08-2011, 06:51 PM	#16 (permalink)
Randy Fabster Join Date: Jan 2001 Member # 3069 Location: Gardnerville NV Posts: 2,528	Thanks for all the orders guys. __________________ Thanks for the support Currie Enterprises PSC Steering BFGoodrich Tires Reid Racing King Shocks Trail Ready Wheels Baja Designes K&N CBM Engines Bulldog Winch Spidertrax Maximum Trans CBR Radiator PRP seats Steinjager PCI 208 Motorsports 2015 KING 2013 KING To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

01-11-2011, 11:57 PM	#17 (permalink)
TCARP1 Registered User Join Date: Feb 2007 Member # 86691 Location: Orangevale, CA Posts: 2,059	Freshly installed! Worked awesome Randy! Thanks for the great product! Attached Images __________________ Ex racer guy:D

01-17-2011, 08:24 PM	#18 (permalink)
Randy Fabster Join Date: Jan 2001 Member # 3069 Location: Gardnerville NV Posts: 2,528	Thanks Travis. __________________ Thanks for the support Currie Enterprises PSC Steering BFGoodrich Tires Reid Racing King Shocks Trail Ready Wheels Baja Designes K&N CBM Engines Bulldog Winch Spidertrax Maximum Trans CBR Radiator PRP seats Steinjager PCI 208 Motorsports 2015 KING 2013 KING To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

01-21-2011, 09:56 PM	#19 (permalink)
SPOR706 Registered User Join Date: Oct 2008 Member # 122727 Posts: 309	Do u offer the brackets for the power steering to i like this set up if it comes with needed bracket for power steering pump

02-02-2011, 06:54 AM	#21 (permalink)
Fl-Krawler Registered User Join Date: May 2005 Member # 47337 Location: Zephyrhills, Fl Posts: 2,993	Price on one shipped to 33541(Zephyrhills,Fl)

02-06-2011, 01:03 PM	#22 (permalink)
syko Registered User Join Date: May 2000 Member # 746 Location: New Salisbury, Indiana Posts: 2,429	PM sent __________________ #419X

02-14-2011, 03:28 PM	#23 (permalink)
Randy Fabster Join Date: Jan 2001 Member # 3069 Location: Gardnerville NV Posts: 2,528	Thanks for the orders. __________________ Thanks for the support Currie Enterprises PSC Steering BFGoodrich Tires Reid Racing King Shocks Trail Ready Wheels Baja Designes K&N CBM Engines Bulldog Winch Spidertrax Maximum Trans CBR Radiator PRP seats Steinjager PCI 208 Motorsports 2015 KING 2013 KING To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

02-22-2011, 12:35 PM	#24 (permalink)
Randy Fabster Join Date: Jan 2001 Member # 3069 Location: Gardnerville NV Posts: 2,528	top __________________ Thanks for the support Currie Enterprises PSC Steering BFGoodrich Tires Reid Racing King Shocks Trail Ready Wheels Baja Designes K&N CBM Engines Bulldog Winch Spidertrax Maximum Trans CBR Radiator PRP seats Steinjager PCI 208 Motorsports 2015 KING 2013 KING To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

03-03-2011, 01:08 PM	#25 (permalink)
Randy Fabster Join Date: Jan 2001 Member # 3069 Location: Gardnerville NV Posts: 2,528	Ttt __________________ Thanks for the support Currie Enterprises PSC Steering BFGoodrich Tires Reid Racing King Shocks Trail Ready Wheels Baja Designes K&N CBM Engines Bulldog Winch Spidertrax Maximum Trans CBR Radiator PRP seats Steinjager PCI 208 Motorsports 2015 KING 2013 KING To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in