|04-01-2020 03:00 PM|
Pandemic part out
*Took me half a day to remember my damn password...*
Not sure this is the best time to try this but I found a classic ford on firesale that I want bad... So consider this water testing.
'79 Bronco (sheet metal is trash, not worth a dime), full custom cage, scabby 1/4 doors, jury-rigged soft top. Runs and drives. Steering cylinder lost a fight with a tree stump but I have a NIB PSC replacement on the shelf.
Load the whole rig up and drive off for $7,500
On fullsizebronco search "Memory Lane... my 79 build" for pics and parts.
I'd need to get a pretty good response to start selling off parts but here's what I think things go for if it comes to that, all OBO of course. PM me with any questions.
79 HP 60, Ox cable locker, 35sp Yukon inners and outers, drive slugs, Hyd Assist, 4.10 - $3,500
Bloody Knuckles front suspension - $1,000
14 bolt, welded, disk brakes 4.10- $200
Axles plus front suspension - $4,000
.030 over 400M w/ported and polished Aussie 57cc heads - $400
Got Propane full setup w/ 4 bottles - $1,000
C6 rebuilt 8 years ago but still stout - $300
203/205 triple stick setup with Jeds and 1410 yokes - $800
Front and rear High Angle 1410 driveshafts - $1,500
Complete drivetrain package - $3,000
43" TSL SX's on powdercoated TWF double beadlocks - $2,500
A few notes -
Doesn't matter around here but the bottles need to be re-certified.
Axles could use some new seals.
Rig is technically street legal but not much fun on pavement and all the front lights have been monkey hammered into submission.
Clear title in my name, just can't find it.
Registered as a special purpose vehicle, single rear plate, insurance isn't required.
Located in Lebanon Oregon
|02-24-2020 06:21 PM|
Moonshiners Swap Meet in Puyallup, at the fairgrounds, this March 8th.
You'll find my junk. And a whole bunch of other folk's junk.
It's a genuine Carhart convention.
|02-24-2020 06:07 PM|
|Ridin Dirty' buggy||Bump|
|02-21-2020 09:35 AM|
Pitbull rocker bias 37x13.5-17 $800
Selling my old pitbulls
12-14/32nds tread depth
Have some 6 lug steel 17s if they're wanted. 7.5 or 8 wide
5 inch or so backspacing
|02-06-2020 06:36 AM|
|adamgllc||TH400 NP203 Combo send PM and will text Pics $300 Picked up Salem, OR Area|
|01-31-2020 04:43 PM|
|rennat_2006||Looking for Yukon Dana 60 selectable hubs, older non super duty style d60.|
|01-31-2020 09:06 AM|
WTB: Explorer 8.8
I need a disc brake Explorer 8.8 with 4.10 gears. I may go crawl P & P this weekend, they don't seem to be able to tell me gear ratios.
|01-13-2020 09:07 PM|
|rennat_2006||Looking for 8 lug 17" beadlocks. What's out there?|
|01-13-2020 12:39 AM|
|Ridin Dirty' buggy||
4ea 43x20 tsl stickies on 20in spyderlock wheels
Spokane wa area
|01-06-2020 08:06 PM|
|Robrun1977||Ill take the pump!|
|12-15-2019 07:32 AM|
|Ridin Dirty' buggy||
High flow Psc tc style pump
Used for 9 events to run a 2.5 psc ram setup with no issues
Just don't need anymore
They are about $200
Will ship from 83813
|12-14-2019 07:28 PM|
Looking for TrailReady beadlocks.
5 on 4.5
|12-07-2019 11:22 AM|
|rennat_2006||Looking for a kevlar mtr 37x12.50r17. Would like 75% or so tread remaining.|
|12-07-2019 11:06 AM|
40x15.5R20 Toyo MT TIres
40x15.5R20 Toyo MT Tires. Two are 95%, two are 85%. They sell for $650 each. I would take $1500 for the set. I will mount and balance for additional. McCall, cannot deliver or ship. Thanks for looking. Message me with an email for pics.
|12-07-2019 11:05 AM|
37x13.5R20 Tires on 20x14 8x170 Wheels
Set of tires and wheels. 20x14 8x170 KMC XD809 wheels with less than a thousand miles on them. 37x13.5R20 E rated Ironman MT tires are almost brand new, less than 200 miles. I just price checked, the cheapest that I could find without mount/balance is 2671.37. I would take $1500 FIRM for the set. Pickup in McCall, cannot ship. I can separate them, $800 for the wheels and $900 for the tires. Thanks for looking. Chris
Email for pics.
|11-17-2019 05:40 PM|
|11-17-2019 05:08 PM|
Selling my well wore 4d BFG Krawlers.
$600 for all four.
PM if interested and I can text pics.
|05-09-2019 05:08 AM|
5--42 Pitbull Rockers on 16.5 TWF re-centered H1s. $2k @19460 in PA
|03-09-2019 07:36 AM|
|Treeclimber||Moonshiner's 4x4 Swap Meet this weekend at the Puyallup fairground. Biggest 4x4 / Offroad swap meet in the northwest. Stop buy and say hi. (misspelled word on purpose)|
|02-21-2019 07:41 PM|
NEW 40 MTRs on TR beadlocks
4 brand new Goodyear MTR Kevlar 40x13.5x17 tires.
4 brand new TrailReady HD 17x8.5 aluminum beadlock wheels with 5 backspacing and 8 lug bolt pattern.
All brand new and only mounted on vehicle to roll it around the garage. The total package cost me over $4500.
Asking $4000 for everything
|01-18-2019 08:59 PM|
Anyone have a source for cage in Portland
Looking to install a family type cage in a CJ7. I am in Portland
Also kind of looking for better axles than stock and 35-37 tires with wheels
|01-12-2019 09:35 PM|
Suzuki vitara is sold
14bolt locker has been purchased
Still have the drw dana 60 hubs, make an offer.
|01-12-2019 11:08 AM|
two-car hauler trailer wanted
I am looking to rent a 7'x36' two-car hauler trailer with a bumper hitch in late April -- early May. Does anyone have, or know where I might be able to rent one?
|11-06-2018 07:11 PM|
Welder bok knuckles, Solid 40 spline hubs and spindles, Ried C's
Brand new parts, only ever mocked up. Welder boy knuckles with the upper bearing setup instead of a king pin bushing. It comes with an extra upper pin. The high steer arm is also keyed to the knuckle, arms included. Ried C's that are machined to fit a 4" tube. Solid 40 spline spindles and hubs with all the bigger bearings and wheel bearing nuts installed, also has a set of 40 spline drive slugs in them. A pair of Foote 40 spline matching stubs. Essentially everything including the C's out goes. $2000 obo. Will ship on buyers dime.
|08-27-2018 04:17 PM|
2000 suzuki vitara 4dr 4cylinder automatic 140k. New camshaft sensor and new crankshaft sensor recently installed. Fresh oil change. Comes with extra set of tires. Has lockrite locker installed in rear axle. Has warn hubs on front axle. Interior could use a little bit of cleaning but no rips or tears, air conditioning works great. Body has scratches, random small dings/dents, and the clearcoat is coming off in some places. I had planned on making it a cheap wheeler/coyote chaser on like a set of 31's but ive got way to many other projects that need my attention over this. $2000 obo
|This thread has more than 25 replies. Click here to review the whole thread.|