 |
|
|
 |
|
|||||||
Topic Review (Newest First)
|
| 10-16-2019 07:59 PM | ||
| Boogs1970 | I moved my pinion up now my caster is way off, put some adjustable ball joints to help with the issue but it's still a little squirrely on the pavement. looks like next big project will be cutting the Cs off and clocking them. | |
| 10-16-2019 07:49 PM | ||
| Boogs1970 | Yeah, I already adjust my pinion angle which then I had to cut my coil spring perches and line them back up with the coils. I'm going to clearance the cardan and see if that helps. Thanks | |
| 10-11-2019 07:00 PM | ||
| Craig6.9diesel |
Quote:
You could clearance the cardan joint with a die grinder. Or you could adjust your pinion angle. |
|
| 10-10-2019 05:25 AM | ||
| Boogs1970 | My tcase is up little higher then stock, its an atlas t case so i cant bring it down much or it hits the transmission cross member. same joint setup that your running. | |
| 10-06-2019 05:47 PM | ||
| Craig6.9diesel |
Quote:
What kind of joints are you running? I’ve got a double cardan at the Tcase, single at the axle. 1350s at all places. Also I didn’t clock my Tcase up. |
|
| 10-05-2019 09:38 AM | ||
| Boogs1970 | yes it's a high pinion. I'm running an atlas 2 . | |
| 10-04-2019 05:52 PM | ||
| Craig6.9diesel |
Quote:
I bent it about 30 minutes into wheeling on Friday.... I took it easy the rest of Friday. Saturday my buddy that I do stupid stuff with showed up and taking it easy didn’t last long. Then Sunday I beat on the Jeep pretty hard. I couldn’t feel a vibrations on the dirt but after unloading it at home I felt it on the road for sure. It held up, the driveshaft guy was surprised it didn’t get any worse. |
|
| 10-04-2019 10:37 AM | ||
| waterhorse | Did the driveshaft cause you to stop? Did it vibrate? | |
| 10-04-2019 09:35 AM | ||
| waterhorse | Did the driveshaft cause you to stop? Did it vibrate? | |
| 10-04-2019 08:48 AM | ||
| Craig6.9diesel |
Quote:
Yes, is your front a high pinion? |
|
| 10-04-2019 05:29 AM | ||
| Boogs1970 | I got my rig pretty much finished up ready to wheel., do have a little issue with the front drive shaft binding at full droop. are you using the 1350 u joints on your front drive shaft? | |
| 09-27-2019 07:37 PM | ||
| Craig6.9diesel |
My Jeep wheeled awesome this past weekend. I did taco my driveshaft pretty good though.     The local shop that built it only charged $100 bill to retune it though. |
|
| 09-13-2019 05:22 AM | ||
| Boogs1970 |
Nice, I finally got mine together now i'm just finding out what needs to be tweaked. Looks like i'm gonna need to rotate my front Cs my caster is way off. |
|
| 09-12-2019 10:59 PM | ||
| Craig6.9diesel |
I rebuilt the bump stops and made a cross brace to connect the upper spring mounts together. Should help.
|
|
| 09-04-2019 09:05 AM | ||
| Craig6.9diesel |
01 XJ Classic on Super Duty axles Quote:
Yep that was me, it was on my Yukon. It’s my daily/tow pig. It’s all fixed now. |
|
| 09-03-2019 09:34 AM | ||
| H8DWINGS | I must follow you on the instant social media application. Some guy on there had an identical problem this weekend and I think the same photo. I was kind of wondering where I learned about this random online person. | |
| 08-31-2019 09:14 PM | ||
| Craig6.9diesel |
Broke a valve spring in the Yukon...
|
|
| 08-23-2019 07:46 PM | ||
| Craig6.9diesel |
Quote:
With the angle of the box, I’m using a straight pitman arm from an Astro: |
|
| 08-22-2019 07:28 PM | ||
| Boogs1970 | so you ended up using the astro van steering gear from red neck with no drop pitman arm? I have the same issue with everything needed to be pushed forward, | |
| 08-13-2019 11:45 AM | ||
| Craig6.9diesel |
Quote:
I’m not 100% sure yet. Probably tear it apart and shoot from the hip. That’s pretty much how I do most my fabricating. Lol |
|
| 08-13-2019 05:32 AM | ||
| Boogs1970 | that's good to hear, what are you planning to change up front? | |
| 08-13-2019 12:26 AM | ||
| Craig6.9diesel |
01 XJ Classic on Super Duty axles Quote:
I have had zero issues with the front suspension besides bump stops. I’m going to have to change the design a bit. |
|
| 08-12-2019 09:12 PM | ||
| Boogs1970 | how does that three link hold up? that's how my set up is but really haven't tested it | |
| 08-07-2019 08:01 AM | ||
| Craig6.9diesel |
Quote:
Dude! I know! |
|
| 08-06-2019 01:37 PM | ||
| thetastelingers | Your rear view mirror looks sad | |
| This thread has more than 25 replies. Click here to review the whole thread. | ||
