|12-12-2019 01:45 PM|
Eta- You shoud call the dealership I got mine from. They have an internet-parts specific guy, and he didn't blink at sending one to Alaska.
|12-10-2019 06:12 PM|
|F*** ROADS||Thanks for the leads all! I have lots of searching to do. I'm a newb to car-part and still on my way to google wizardry. Is that diff for $250 a complete housing? I can't seem to find it. Though have found some potential candidates..|
|12-10-2019 01:14 PM|
|Action Fab||There's a 3.55 e-lock axle on Car-Part for $250. It's located in Michigan.|
|12-10-2019 12:57 PM|
|12-05-2019 08:54 AM|
|Gozuki||Call LKQ Canada. Their southern brethren located a matching set for close to $500 delivered.|
|12-04-2019 06:55 PM|
|F*** ROADS||After some research, it looks like getting one of these to Canada is not cost effective. And the dealers here want $1132 canadian. So the only option would be getting lucky at a JY.|
|12-01-2019 07:47 PM|
|11-29-2019 06:51 PM|
|F*** ROADS||Anyone know how strong these lockers are? I'm considering grabbing one of these. It would be in a heavyish rig with up to 40" tires one day. Just don't want to find one and grenade it on the trail...|
|11-21-2019 12:23 PM|
|08-09-2019 09:55 PM|
|08-09-2019 09:35 AM|
outer bearing on 11 and up diff
race OD is 4.125 and bearing ID is 2 inch
race OD is 3.25 and bearing ID is 1.625
|08-09-2019 03:12 AM|
|08-08-2019 06:33 AM|
On another note, if it was different between the two pinions I wonder if you could look through the bearing books and find a conversion bearing with the right od and id?
|08-01-2019 09:38 AM|
|D_engel||Did anyone ever get confirmation on whether or not you can throw an older 31 spine pinion into a 2011+ housing with a pre-2011 bearing kit? If the inner and outer pinion race diameters are the same, 3" in older Sterlings I believe, shouldn't everything drop right in?|
|05-13-2019 01:25 AM|
|05-12-2019 06:46 PM|
|Monstermiler||That probably some type of shot preening to stress relieve the surface after machining.|
|05-12-2019 06:44 PM|
|Monstermiler||Thanks for the heads up.|
|05-12-2019 06:39 PM|
|05-12-2019 06:27 PM|
I just got mine for $480 from Waldorf Ford in MD.
EditToAdd- Waldorf, because Sneed and the others below $500 have TERRIBLE online feedback ratings, both as dealers and parts. Waldorf didnt, and were friendly and helpful when I talked to Jerry, their internet parts guy. The 2 sellers on ebay at $530 have bad ebay feedback, and worse dealership reviews outside ebay.
Shipping to Ak was $100 since they were willing to do USPS (far cheaper up here). Shipping to Wa was showing $50.
The packing could have been better.
I'm going to get an actual amp draw later.
Are the spiders supposed to look like that? Rough cast doesn't seem right.
|05-12-2019 05:30 PM|
|dieselboy740||Called my ford dealer and he quoted me 575$. I may do that. Everywhere wants like 80-150$ shipping|
|05-09-2019 10:58 AM|
We were putting them through pretty rough conditions, so I would absolutely feel good about them in this situation.
|05-08-2019 06:50 PM|
Through-hull insulated stud, for mounting sacrificial zincs on boats.
|05-06-2019 01:52 PM|
|05-06-2019 01:18 PM|
|Subybaja||I like the idea of only one wire, but aren't you worried about putting junk metal under the cap bolt?|
|05-06-2019 12:07 PM|
|Subybaja||Well, my local idiots want $800, plus a $750 core. Nope. Ordered from Waldorf Ford. Now, waiting for Brown Santa.|
|This thread has more than 25 replies. Click here to review the whole thread.|