|05-25-2019 02:22 PM|
|05-25-2019 12:08 AM|
|total newb||So wtf was it|
|05-24-2019 10:56 PM|
|-burzum-||Figured it out. Its nice to be able to go up to the counterman and give them a make and model for buying parts.|
|05-24-2019 06:32 AM|
|I Lean||Don't worry about what it came from--throw it away and get at minimum, a later model with the larger spindle bearings. (unless you're going to cut it up and just use the center section...in which case it's just a D60)|
|05-23-2019 08:29 PM|
|rockyota83||or just buy the fawking weld on brackets and get over it|
|05-23-2019 01:25 AM|
|Beat95YJ||also measure perch width.|
|05-23-2019 12:02 AM|
With 16 spl its going to be early 70s at the newest
1 axle a wheel base does not make.
Perch spread can often be a good indicator of chassis mfg
Along with hub pilot diam.
That info still covers, gm, ford, dodge, jeep j trucks, and ih
|05-22-2019 11:27 PM|
I thought it might be simple like certian wheelbases indicate different brands or somthing. I'll try to get pics later.
WMS-WMS is 65"
Tubes are 3 1/4
the words HD60 are cast into the housing behind the bearing cap
originally it had 16 spline axles.
12" drum brakes presently
wheel lug pattern 8 x 6.5
|05-20-2019 11:11 PM|
|05-20-2019 11:04 PM|
|05-20-2019 10:48 PM|
|total newb||Post pics. Cause no bom, no info at all, and no pic means you dont get shit for help.|
|05-20-2019 10:02 PM|
Dana 60 Rear identification issue
Ive got a mystery rear dana 60 with no BOM. Im trying to get a disc conversion kit for it and the brackets are different between makes. Does anybody know how to tell them apart?