|07-26-2019 08:07 AM|
|07-25-2019 12:30 PM|
|07-24-2019 02:17 AM|
|Tacedaddy||yeh not really hardcore but, on my CJ7 i wrapped everything from the header back about 3' with fiberglass exhaust wrap. made a heck of a difference inside|
|07-23-2019 12:13 PM|
CJ7s with factory V8s had metal heat shields spot welded right on the firewall near where the exhaust manifolds are on both sides. They space out from the tub about 1/2". You might be able to fabricate them and weld or rivet something similar on your YJ tub.
Maybe someone can post a pic of them on a factory V8 CJ-7 tub??
|07-23-2019 09:48 AM|
Any holes in the firewall or floor pan? My CJ was brutal with any under-hood airflow into the cab. Next step I would take would be heat shielding the firewall if it happens at speed.
For the hood, I used boat louvers and used mesh/screen on the fenders behind the tire to let hot air out. Inner fenders may get hacked too if that's not enough.
EDIT: probably should move this to newbie as it certainly isn't hardcore.
|07-23-2019 08:16 AM|
I have a 90 YJ with a 360 and I am having issues with extreme heat in the cab. I have looked at hood scoops but there are not too many available they are all just for show. Any ideas??