|05-18-2006 07:41 AM|
My wifes 97 2.5 doesn't have a PCV... Just a breather hose.
Degrease and power wash the bugger off - run it for a while and look for drips. Oil leaks are a bitch to find - I agree with actionpaintball. Get a dye pack and black light. Almost all shops use this method to find leaks.
|05-17-2006 11:37 PM|
|gumbojeepyj||i had a similar leak on a 4.0, turns out it was the head gasket....|
|05-17-2006 11:07 PM|
I have the same problem, and I am replacing the gasket on my distrubutor shaft. I have also replaced the rubber gaskets on the PCV valve and that other thing on the back of the valve cover.
Try cleaning the engine with some really good stuff (like simple green), then drive it for a while and park it. You should be able to determine where the leak is after that.
|05-16-2006 09:56 PM|
|04-02-2006 07:07 PM|
|huit-huit||any more input on this .. the damn thing is still leaking|
|03-21-2006 08:35 AM|
|huit-huit||yes if they get clogged they will make it so the oil tries to find a escape route... OIL dipstick|
|03-21-2006 08:32 AM|
then take the one you have to the store, and find one that matches.
BTW- PCV valves never really go bad, they get clogged, usually a shot of carb cleaner will clear things out.
a little hostile today?
|03-21-2006 07:31 AM|
|huit-huit||Thanks BUDDY but thats not the part i need thats the one the dealershiop gave me but its too small and doesnt work.oh btw littlejohn ESAD|
|03-21-2006 07:24 AM|
Do you know how to use a computer, or make a phone call?
Advance auto- took two seconds on their site
|03-21-2006 07:04 AM|
Buy the UV engine oil dye kit for about $15-degrease your engine and add it. Run it one day and look at where the oild dye lights up under a blacklight of the included pen light. It should lead you back where the leak is coming from.
You can get the kits from some auto parts stores or here:
I use the dye and a blacklite bulb in my garage at night with the lights off-or you can buy the UV leak detector pen that is commonly used for AC systems.
You might also call around to equipment dealers (like case and john deere as they use the same stuff for hydraulic leaks)
|03-21-2006 06:56 AM|
|huit-huit||ive tried all of this but nothign seems to get it|
|03-20-2006 08:57 PM|
|Plato2k5||goto www.advanceautoparts.com www.autozone.com and do a search, or... give them a call|
|03-20-2006 08:36 PM|
|huit-huit||wow mine doesn't have it! I need to get this fixed anybody have a part number or a pcv valve|
|03-20-2006 08:28 PM|
|EMT||sorry cant help you on the part number,ive always looked mine up in the books at wallyworld they usually carry them.|
|03-20-2006 08:21 PM|
|huit-huit||Yes that sounds like a fantastic idea! UM part number?i tried to get one from the factory and they dont have one for me it|
|03-20-2006 08:12 PM|
|EMT||try putting a new pcv valve in it.|
|03-20-2006 07:03 PM|
|huit-huit||any infro on this anybody|
|03-20-2006 11:31 AM|
|huit-huit||When I replaced the tube it came with a new o ring and it still does it.. Only does it after driving it|
|03-20-2006 09:40 AM|
Check the o-ring where the dipstick tube goes into the block. I had the same problem you are having, and that was the source of my problem.. and only happened when driving, not in the driveway...
Hope that helps,
|03-20-2006 05:36 AM|
|huit-huit||That doesnt look to be it!|
|03-19-2006 07:55 PM|
|Tfritz||Check your oil sending unit. It is above and forward of the dipstick.|
|03-19-2006 07:37 PM|
Yj Oil Leak
I have been noticing that thier have been oil under my jeep after I drive it. It is a 2.5cyl, and the motor only has about 90,000 miles on it.. It looks to be coming from the dipstick tube.So I replaced the oil dipstick. and it still comes out.. I would put this in Newbie tech. but nobody knows whats going on and i searched but found nothgin so im resorting to this. Thanks for any info